Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
1155 results · Page 10 of 33
Four Trailing Stars and Dots
Four five-pointed stars in descending sizes sweep diagonally across the pumpkin, joined by a few small round dots that read like distant sparkles. Each star and dot is cut fully through, so the cluster twinkles convincingly once a candle goes in. The star points are what make this a medium carve; drill a starter hole at the center of each star and always saw from the middle out toward each tip to keep the points sharp.
Four Woodland Toadstools
Four spotted woodland toadstools cluster among curling leaves and grasses, carved in deep relief so the caps, gills, and stems stand out from the shell in true sculptural layers. Nothing is pierced; the design is built entirely by shaving and sculpting the wall to different depths, with the tall center mushroom's gilled underside as the showpiece. Rough out the deepest background first, then refine the gill lines last with a V-gouge while the ridges are still thick.
Four-Arch Rainbow
Four nested rainbow arches glow from the lower half of the pumpkin, each band separated by a strip of untouched shell. The arch openings are cut all the way through while the curved ribs between them stay in place to define the rainbow shape. Start with the smallest inner arch and work outward so the narrow ribs keep their support as long as possible.
Four-Toed Paw Above Broad Bone
A four-toed paw print floats above a big classic dog bone, a simple two-part salute to the family pup. Both shapes cut fully through: the four toe pads and rounded palm glow as separate openings, and the chunky bone shines below them. It is a forgiving beginner carve because every shape is wide and rounded; just space the toe pads carefully when transferring the pattern so the skinny walls between them stay intact.
Four-Tongue Flame
One big flame fills the face of the pumpkin, its four licking tongues tapering to sharp points just like the classic fire symbol. The entire flame is a single cut-through shape, so candlelight literally becomes the fire. This is an easy carve with only one piece to remove; poke the pattern deeply at each flame tip first, then saw from the rounded base upward so the narrow points come out clean instead of ragged.
Four-Wing Dragonfly
A graceful dragonfly spreads four broad wings from a segmented body that runs straight down the pumpkin, with two small antennae curling from its head. Nothing is pierced; instead you shave the skin inside each wing and body segment so the shapes read as pale etched panels against the orange rind. Use a loop tool and keep the shave shallow so the wing outlines stay crisp.
Fox Pumpkin Stencil
A fox in a frontal stance with pointed ears, a small round nose, almond eyes, and a bushy chest rendered in flowing tribal-style strokes fills this hard animal pumpkin stencil. The fur is suggested by numerous narrow curved blade-shaped cutouts that radiate from the body center, each separated by thin pumpkin-skin bridges. Because many of these fur-stroke islands are only a few millimeters wide, carve the face feature voids first to anchor the design, then work outward through the fur strokes from chest to leg tips.
Frankenstein Face Pumpkin Stencil
A detailed Frankenstein portrait fills this jack-o-lantern pumpkin stencil: the creature's flat-topped head, spiky hair, bolt-and-stitch scar running diagonally across his forehead, heavy brow ridge, round glasses, and grimacing stitched mouth are all rendered as bold cut-through shapes. The thick outlines stay solid while the eyes, glasses lenses, and scar details pierce through, casting dramatic light patterns. Cut the small stitch details on the forehead first so the surrounding pumpkin wall stays firm while you work inward toward the larger facial openings.
Frankenstein Pumpkin Stencil
This Frankenstein pumpkin stencil takes a bold, graphic approach: a wide flat-topped head with jagged spiked hair cut as a top border, a dense row of small stitch cuts across the forehead, thick angular brow and wide nose, a broad mouth showing individual teeth, and square neck-bolt tabs on both sides. The cut shapes are chunky and widely spaced, letting abundant light pour through the tooth row and eye slots when carved. Cut the tight stitch row across the forehead first, keeping each tiny rectangle separate, before opening the larger eye and mouth areas.
French Bulldog Pumpkin Stencil
A French Bulldog face stares straight out in this hard dog pumpkin stencil, its large upright bat ears, flat wrinkled muzzle, deep-set eye hollows, pushed-in nose, and jowl folds all captured as a continuous linework design with the open channels carved through and the skin ridges left intact. The ears are wide and open, connecting to the head via two curving lines that form thin bridges at the ear base. Carve the interior face details, including the eye hollows, nose curl, and jowl lines, before cutting the outer ear outlines, so the head stays rigidly attached while you work the delicate inner linework.
French Bulldog Puppy Pumpkin Stencil
A front-facing French Bulldog puppy sits with large upright ears, wide cartoon eyes with round pupils, a flat pushed-in nose, spot-marked cheeks with tiny freckle dots, and chunky paws crossed at the bottom in this dog pumpkin stencil. The cut-away areas around the ears, inside the eyes, and across the chest give the glowing jack-o-lantern a strong portrait effect with plenty of warm orange pumpkin skin defining the Frenchie's wrinkled face. Carve the freckle dots and pupil circles before the ear openings so the delicate face detail is cut while the surrounding skin is at its firmest.
Friendly Alien Monster Pumpkin Stencil
A friendly alien monster pumpkin stencil showing a round-bodied creature with three bulging circular eyes, two small antenna balls on stalks, a wide grinning mouth with pointed fangs, and shaggy textured fur patches on its body and feet. One arm is raised in a wave while the other hangs loosely at its side. Carve the three eye circles early, since they are isolated islands that require intact pumpkin wall around them to stay in place.
Friendly Ghost Pumpkin Stencil
A cheerful, cartoonish ghost with a round pudgy body, wide grinning face with crinkled eyes and rosy cheeks, and wavy trailing edges floats center-stage in this ghost pumpkin stencil. The ghost's body is a network of flowing curved solid lines, the outline, the cheek arcs, the eye detail curls, set against cut-through areas that form the glow around the figure. Wispy curl accents appear on both sides. The crinkle details inside the eyes and the small cheek curves are the narrowest solid bridges; cut those first before removing any of the surrounding open areas.
Friendly Jack-o-Lantern Pumpkin Stencil
Two rounded horseshoe-arch eyes, each with a small bump notched from the bottom to suggest eyebrows, and a broad curved mouth split by two square bottom teeth define this easy pumpkin stencil. The asymmetry between the left eye (fuller arch) and the right eye (slightly smaller, offset notch) gives the face a winking or quizzical personality. All cut-outs are generous and smooth, making this a good pumpkin stencil for carvers who want a friendly face without tiny fiddly pieces. Leave the two small inner-eye notches for last so the arch stays rigid while you cut the mouth.
Frothy Four-Panel Beer Mug
A frothy beer mug fills the pumpkin, its billowing head of foam spilling over a four-panel glass body and a sturdy curved handle. This is a shaded design carved into a continuous wall, so the mug is shaved out of the skin rather than pierced, which keeps the foam bubbles and panel lines intact. Shave the foam shallow and fluffy, then go slightly deeper on the four panels so the glass glows brighter than the head.
Full Skeleton Pumpkin Stencil
A full standing human skeleton fills this pumpkin stencil from skull to toe bones, its ribcage, pelvis, limb segments, and finger and toe joints all rendered as distinct cut-out sections separated by thin solid bridges. When lit, every bone grouping glows individually against the orange pumpkin wall. Cut the ribcage slots from the center outward to avoid destabilizing the spine bridge that holds the upper torso together.
Full Stegosaurus Skeleton Pumpkin Stencil
A stegosaurus skeleton shown in full side profile fills this expert pumpkin stencil: a long skull with open jaw, four bony legs with claw toes, a ribcage made of many individual rib-bone cutouts, vertebral column, and four large dorsal plate outlines along the back. The sheer number of individual rib and bone segments, each separated by thin pumpkin bridges, makes this a complex carve. Cut the large dorsal back plates first since they are the most isolated shapes, then work through the ribcage from front to back one rib at a time to avoid destabilizing the spine bridge.
Funny Monster Pumpkin Stencil
A round-bodied cartoon monster with an oversized fuzzy head, two large circular eyes, a wide fanged grin, spiky hair tufts, stubby arms raised to the sides, skinny stick legs, and round feet fills this pumpkin stencil. The creature's oval eye circles and the spaces between the arms and body are cut through, while the chunky body silhouette stays as solid orange skin. Carve the two circular eye openings and the small round nose dot at the top before cutting the body perimeter, so you can brace the knife against solid material.
Furious Eyes and Diamond Mask
A ferocious mask of a face with slanted furious eyes, a flared nose, and a jagged mouth full of interlocking fangs, all framed by dense rows of diamond and wedge cutouts that cover the cheeks and brow like scales. Every diamond, wedge, and fang is pierced through, turning the whole front into a lattice of fire. This expert pattern demands order: carve from the center outward so surrounding cuts never weaken your working area.
Furry Monster Pumpkin Stencil
A stocky, fuzzy monster with two curved C-shaped eyes, a wide toothed grin, shaggy fur texture all over its body, two stubby horns, and three-fingered clawed hands raised at its sides fills this hard pumpkin stencil. The fur shag is expressed as jagged fringe cuts around the silhouette's edge rather than interior cuts, keeping the figure stable. The thick C-eye shapes and the tooth row between the upper and lower jaw are the most structurally important bridges. Carve the fur fringe around the outer edge before opening the smile area so the lower body stays anchored.
Fuzzy Monster Pumpkin Stencil
A round, fuzzy cartoon monster with stubby arms and legs dominates this hard pumpkin stencil, set inside a large circular frame with small scattered cut-outs suggesting a speckled texture. The creature has crescent-shaped eyes, a wide open mouth rimmed with ragged teeth, and a tongue poking out, while splatter-like shapes burst from the sides. The monster's body is largely solid orange with the negative space around it carved out, so light escapes the outer circle and the scattered texture dots, keeping the face readable. Cut the circular outer border and the scatter dots before tackling the detailed mouth.
Galaxy with Three Planets
A sweeping spiral galaxy wraps across the entire pumpkin face, its curved arms shaved in graduated depths so the core glows brightest, while three ringed planets and scattered stars orbit the edges in raised relief. Nothing is pierced; every effect comes from continuous-wall shading at different thicknesses. Expert-level patience pays off here: establish the spiral arms as broad shallow bands first, then deepen toward the center in passes to build the luminous gradient.
Game Over Pumpkin Stencil
"GAME OVER" fills this easy pumpkin stencil in two stacked rows of chunky 8-bit pixel font lettering, each character built from squared-off rectangular blocks with notched corners that read unmistakably as retro video game text. Every letter interior is cut through, and the negative space between characters is narrow but distinct. The squared notches at the corners of each letter are the trickiest spots to keep clean; use the tip of a narrow blade to score those inside corners before opening the main letter body.
Garden Bench Paw Print
One oversized paw print sits front and center: a broad pad below four oval toes. Nothing is pierced through; you shave away just the skin inside each shape so the pale flesh shows in a soft, even glow. Since this is an easy shading design, use a loop tool or spoon edge and keep your scraping depth consistent so every toe lights up the same.
Garden Gnome Pumpkin Stencil
A garden gnome with a tall floppy pointed hat, round rosy cheeks, and a tiny curved smile stands front-facing in this easy pumpkin stencil. The hat brim curls at its tip, the face is framed by a bushy beard rendered as rounded overlapping lobes, and small feet peek out at the base. Cut-through openings define the hat interior, the beard lobes, and the body, while the face circle, hat brim, and outer silhouette stay solid. The small smile curve and cheek details are the most delicate pieces, cut them before opening the large beard sections below.
Garden Snail & Grass
A smiling garden snail glides between tufts of grass, its spiral shell coiling into a bold center swirl. The design is pure surface work; you shave the skin from the body, shell, and grass blades so they glow pale against the dark rind, with the spiral line left raised for definition. Shave the big shell arc in one smooth pass, then use a fine gouge for the antennae and grass so they stay thin.
Garden Snail with Spiral Shell
A garden snail glides across the pumpkin with a beautifully ridged spiral shell, textured body, and two slender eye stalks reaching forward. Nothing is cut through; the whole snail is shaved and sculpted from the skin so its pale relief stands against the dark rind. This hard shading design rewards patience with texture: carve the shell's spiral grooves at varying depths and stipple the body with shallow scoops to suggest its bumpy skin.
Gargoyle Pumpkin Stencil
A detailed gargoyle face stares out from this expert pumpkin stencil, with swept-back horns, pointed ears, arching eyebrows, a broad flat nose, and wide wings that flare to either side like a cathedral guardian. Dozens of separate cut-out pieces form the facial features and wing feathers, leaving solid bridges of pumpkin skin to hold each island in place. Work from the smallest interior details outward: cut the eyebrow slashes, nostril notch, and tiny chin dimple first, then the larger wing panels last, to keep the fragile facial bridges stable while you carve.
Gear Cross and Three Dots
A chunky steampunk gear glowing around a solid crossbar, with three round rivet dots floating beside it like escaping sparks. The spaces between the gear teeth and the four windows inside the cog are cut through, while the cross-shaped bar stays attached to the pumpkin wall and holds everything together. Carve the small dots first, then the gear windows, and keep the crossbar at least a finger wide so the design stays rigid.
Gecko with Thirteen Toe Tips
A gecko sprawls diagonally across the pumpkin as one bold silhouette, splayed toes gripping and its thick tail curving away. The entire lizard is a single cut-through aperture, so the whole body glows as one connected shape with those distinctive rounded toe pads catching the light. At medium difficulty, the toes are the trick: cut each tiny pad by connecting it to its leg with a short channel, and remove the big body piece last.
Geometric Butterfly Pumpkin Stencil
A geometric butterfly pumpkin stencil showing a symmetrical butterfly with four wings divided into bold sections: two large upper wings each containing a full circle and a pointed outer blade shape, and two lower wings each with a scalloped half-circle cutout. A slim segmented body runs down the center axis with small antennae at the top. The large wing sections and the lower scalloped openings glow brightly when lit, while the solid center body and the wing-division lines keep the butterfly shape crisp. Cut the two round upper wing circles first, since they are isolated islands that must be scored from the surrounding wing before anything else is removed.
Georgia Pumpkin Stencil
The outline silhouette of the state of Georgia fills this easy pumpkin stencil as a single solid cut-through shape, with its distinctive roughly rectangular form, slightly notched upper-left corner, and irregular eastern and southern coastline edges. When carved, the entire state shape is removed as one piece, leaving a glowing Georgia silhouette in the jack-o-lantern. Score the outer border slowly and follow the subtle coastal indentations closely on the right side to keep the shape recognizable, especially the small southeastern projection at the bottom.
Georgia State Shape
The full outline of Georgia is removed as one big opening, from the straight western border to the jagged Atlantic coastline in the southeast. Everything inside the state shape gets cut away while the pumpkin wall around it stays intact, giving you a bright glowing map. Trace the bumpy river border on the west side carefully; the rest is long smooth strokes suited to a medium skill level.
German Shepherd Pumpkin Stencil
A German Shepherd in a proud alert stance fills this pumpkin stencil as a single clean silhouette: erect pointed ears, a strong muzzle, a deep chest, and a slightly tucked hindquarter all captured in an unbroken outline with no interior cut-outs. When carved, the whole dog shape is one large pierced-through opening that glows as a pure bright silhouette against the dark night. Because the design has no internal bridges to worry about, trace the outline slowly and keep the cut continuous, paying extra attention to the sharp ear tips and the fine fur texture along the belly line, which can tear if the blade catches.
Ghost Emoji Pumpkin Stencil
The ghost emoji comes to life in this beginner pumpkin stencil: a wide-eyed ghost body with one large circular eye and one smaller dot eye, a gap-toothed open mouth with a dangling tongue, two draping arms with pointed tips on each side, and a looping curved tail below. A raised brow arc sits above the eyes. The ghost body outline remains solid while the eyes, brow, mouth, tongue, and tail gaps are cut through. Cut the small eye dot and brow arc first, then the tooth gaps in the mouth before opening the larger arm-side cutouts.
Ghost Mask Pumpkin Stencil
A ghost-faced horror-movie mask is the subject of this easy pumpkin stencil: an elongated oval skull shape with two large teardrop eye cutouts, a small oval nose hole, and a wide gaping mouth that tapers to a pointed chin. Flowing tendrils extend from the lower sides of the mask. The three facial openings glow as three distinct shapes, and the flowing lower extensions give the mask a draping, spectral quality when lit. Cut the narrow nose piece first since it sits between the two large eye openings and is the most vulnerable to tearing.