Pumpkin carving templates
572 free printable stencils. Download, print, trace, carve.
572 results · Page 14 of 16
South Dakota Pumpkin Stencil
South Dakota's near-rectangular outline, with its straight top and left borders and a stepped notch along the upper right where the Missouri River forms the border, plus a small jagged peninsula at the lower right, makes up this clean state pumpkin stencil. Almost all the edges are straight or gently curved, making this one of the more approachable state silhouette carves. Score and cut the straight left and top borders first since they set your orientation, then work around the subtle river-step notch and the irregular lower-right point last.
Spider Emblem Pumpkin Stencil
A stylized spider rendered as a graphic emblem fills this easy stencil: the body is split into a large oval abdomen and a smaller rounded head kept solid as orange pumpkin, while the eight legs radiate outward as broad curved blades that taper to sharp points, all backed by cut-out negative space. The overall silhouette has a bold, almost logo-like quality that glows dramatically when lit. Leave the narrow waist bridge connecting the head to the abdomen until last, since removing adjacent leg gaps early can put stress on that small connector.
Spider Pumpkin Stencil
A large eight-legged spider crouches in full top-down view on this easy Halloween pumpkin stencil, its oval abdomen and round cephalothorax left as solid orange while all the space between the angled legs is pierced through. Eight legs radiate outward and slightly downward from the body, each tapering to a point. The gaps between legs are the cut areas, so work around the spider methodically to avoid accidentally snapping any single leg at its thinnest point near the body junction.
Spider Pumpkin Stencil
A large, wide-legged spider dominates this beginner spider pumpkin stencil. Eight straight angular legs radiate from a round body at center, and a small rounded head sits just above the abdomen, both carved as a solid silhouette island connected to the surrounding pumpkin only by the gaps between each leg segment. When lit, the dark spider shape floats against a glowing orange field created by the large open spaces around and between each leg. Start by cutting the long outer leg segments first so the body stays supported until the final cuts.
Spider Silhouette Pumpkin Stencil
A bold overhead-view spider silhouette with eight long tapering legs and a rounded abdomen below a smaller cephalothorax forms this easy spider pumpkin stencil, the entire body pierced through as one large connected cutout. The legs splay outward symmetrically, spanning nearly the full width of the design. Because the whole shape is one continuous cut, the chief challenge is the narrow neck pinch between the two body sections; cut that junction slowly with a fine blade to keep both halves from separating before you are done.
Spider Web Pumpkin Stencil
An expert-level spider web pumpkin stencil featuring a large radiating cobweb that fills the pumpkin face, with concentric rings connected by curved spoke segments creating dozens of small trapezoidal cells to cut through. A small cartoonish spider with round body and eight outstretched legs sits in the lower right corner. The web structure stays intact because the solid spokes and ring arcs are left as orange skin while every cell between them is pierced. Work from the center hub outward ring by ring, finishing the spider body last since its legs are the most fragile pieces.
Spiky Spider Pumpkin Stencil
A front-facing spider with a cartoon scowl and spiky, porcupine-like hair fills this hard spider pumpkin stencil. The round, spiky abdomen is encircled by a ring of radiating spike-like projections, and four angular legs extend from each side within an outer octagonal border. The face detail consists of two teardrop-shaped eyes and a frowning mouth, all carved as open shapes inside the solid round body. When lit, the spiky halo around the body glows intensely. Carve the outer octagonal border ring first, then the leg pairs, before finishing the delicate face cutouts inside the central body.
Spooky Text Pumpkin Stencil
The word "Spooky" is carved in bold bubbly lettering with each letter outlined as a cut-through shape on this Halloween pumpkin stencil. The two O's feature skull-like eye holes inside them, and drip lines hang from the letters below. Curling ribbon flourishes arc above and below the text, all pierced through. Lit from inside, the letters glow with dark gaps forming the decorative interior details. Take care to preserve the thin drip connections between letters, as those links keep each letter floating in place on the pumpkin wall.
Spooky Tree Face Pumpkin Stencil
A gnarled, bare tree with an angry face carved into its trunk fills this expert pumpkin stencil. Dozens of branching limbs spread across the upper half, tapering into fine tips, while the lower trunk reveals a grimacing face with heavy brow, sunken eye sockets, and a roaring open mouth. The many thin branch tips and the narrow spaces between limbs make this one of the most demanding cuts in any tree pumpkin stencil design. Start from the outermost branch tips and work inward toward the trunk so the fine ends are cut while the wall is still fully supported.
Spooky Tree in Moon Pumpkin Stencil
A bare-branched tree fills a full circular moon in this expert-level pumpkin stencil, its trunk and sweeping limbs carved away while dozens of tight spiral curls on every branch tip remain as solid orange bridges. The lit jack-o-lantern shows the curled branch ends glowing like tiny flames against the open black sky of the moon circle. Tackle the small spiral cuts at the outermost branch tips before removing any large background sections, so the sheet stays supported while you work the most delicate shapes.
Sports Balls Pumpkin Stencil
Four sports balls are stacked and overlapping in a loose cluster: a soccer ball at the top with its pentagon-patch pattern, a football on the left with stitching lines, a basketball on the right with its curved seam lines, and a baseball at the front center with a double-stitch seam. Each ball's distinctive surface markings are left as uncut pumpkin ridges, so when lit the glowing interior shines through the open areas between stitches and panel gaps. Carve the baseball's curved stitch lines last since they are the finest linework and benefit from the stability of the surrounding cuts already in place.
Star of David Pumpkin Stencil
Two overlapping equilateral triangles forming the Star of David fill this pumpkin stencil as a clean geometric shape. The entire six-pointed star outline is carved as a single continuous pierce-through, and the small hexagonal gaps at each interlocking corner are left as solid pumpkin wall, creating the interlaced look of the design. On the lit jack-o-lantern the star glows in bright outline form. Score the six triangle tip points lightly before making full cuts; the acute corners are the most likely to tear, so finish them with a fine blade rather than a heavy saw.
Stegosaurus Pumpkin Stencil
A cartoon stegosaurus with a round friendly face, four chunky legs, and a row of large diamond-shaped back plates fills this hard pumpkin stencil. The body is carved as a wide open pierce, the back plates are pierced individually above it, and the toes and facial details are fine cut-outs. When lit, the dinosaur glows as a bright segmented shape with the plates hovering above the silhouette. Carve the face details and tiny toe lines before removing the large body section, since the body cut-through will flex the pumpkin wall and make those small details harder to control.
Stegosaurus Skeleton Pumpkin Stencil
A stegosaurus skeleton pumpkin stencil shows the dinosaur in profile walking left, with a series of large angular back plates rising above the spine, a segmented backbone, oval body spots, four chunky limbs, a branched tail end, and a small open mouth with teeth. The back plates cut through as individual diamond and triangular shapes while the body spots and limb outlines are separate pierced sections, leaving orange ribs of skin between them. Cut the back plates from the tallest center spike outward toward the smaller side plates so the tallest unsupported pieces are freed last.
Stegosaurus Skeleton Pumpkin Stencil
A stegosaurus skeleton shown in full side profile fills this expert pumpkin stencil: a long skull with open jaw, four bony legs with claw toes, a ribcage made of many individual rib-bone cutouts, vertebral column, and four large dorsal plate outlines along the back. The sheer number of individual rib and bone segments, each separated by thin pumpkin bridges, makes this a complex carve. Cut the large dorsal back plates first since they are the most isolated shapes, then work through the ribcage from front to back one rib at a time to avoid destabilizing the spine bridge.
Stork with Baby Pumpkin Stencil
A flying stork carries a bundled newborn in its beak in this cheerful pumpkin stencil, the whole scene rendered as a single horizontal silhouette cut entirely through the pumpkin wall. The stork's body, outstretched wings, long bill, and the round swaddled baby bundle are all connected in one flowing outline. Because the bird's bill is the narrowest point in the silhouette, carve it last and approach the tip from the beak base rather than from the pointed end to avoid snapping.
Sugar Skull Pumpkin Stencil
This sugar-skull pumpkin stencil features a circular skull face filled with symmetrical Dia de los Muertos ornamentation: two large almond-shaped eye sockets, a central floral cross motif above them, scrollwork tendrils curling outward on both cheeks, and a rectangular tooth-grid at the chin. The design carves as a mix of open negative spaces and solid orange bridges that define each decorative element. Cut the cheek scrollwork before removing the large eye sockets, since the thin curling lines are easier to control while the surrounding wall is still solid.
Sugar Skull Pumpkin Stencil
A Day of the Dead sugar skull topped with a crescent moon cutout sits above two crossed bones on this expert ghost pumpkin stencil. The skull face is packed with ornate floral-style cut-out circles, petal shapes, a nose diamond, and a grid-patterned mouth, all surrounded by thin decorative bridges. Because so many small circular cutouts cluster around the eye sockets, carve both large eye circles first to relieve the surrounding tension, then work outward through the smaller petal and dot details.
Sugar Skull Pumpkin Stencil
A sugar skull face radiates symmetry in this Dia de los Muertos pumpkin stencil, with two large oval eye openings, a heart-shaped nose, and a row of rectangular teeth cut through, flanked on each side by detailed rose clusters with petal loops. The forehead band is a broad solid bridge separating the floral crown region from the face below. Cut the intricate rose petal loops before the large eye ovals, since the petals are fragile and need the surrounding wall still intact for support.
Sugar Skull Sombrero Pumpkin Stencil
A calavera skull wearing a wide sombrero fills this expert pumpkin stencil: the sombrero brim is ringed with rows of small scallop-cut holes and vertical stripe slots, the crown shows banded tiers, and the skull below has large flower-shaped eye sockets, a heart-shaped nose, a grinning mouth, and curling moustache scrolls on each side. Every decorative element is cut away so candlelight floods through the scallops, stripes, and flower eyes simultaneously, creating an elaborate Day of the Dead glow. Start with the tiny scallop holes along the sombrero brim before any other cut, since those are easiest to control while the surrounding skin is still rigid.
Sugar Skull Sombrero Pumpkin Stencil
A Dia de los Muertos sugar skull wears an enormous sombrero whose brim is covered in repeating triangular geometric cutouts, while the skull face below shows heart-shaped flower eyes with petals, small crescent cheek scrolls, and a toothy grin in this expert sugar-skull pumpkin stencil. The tight zigzag pattern on the sombrero brim requires precise, repetitive cuts that must stay connected by narrow bridges to hold the hat together. Carve the hat band and dome details at the top first, then work row by row down the brim triangles before tackling the face, so the skull does not shift while the delicate geometric grid is still being cut.
Sugar Skull with Roses Pumpkin Stencil
A sugar skull face with flower-ringed eye sockets, a crown of jagged flames, a heart-shaped nose, and rectangular teeth is surrounded by six individually carved roses in this expert pumpkin stencil. Every petal cluster, leaf, and decorative element is a separate pierce-through, creating an intricate Day of the Dead tableau. The carved pumpkin glows through dozens of individual openings simultaneously. Work from the center outward: finish all skull face details before the outer roses, so you can brace the pumpkin face-side-down when carving the perimeter flower clusters.
Sunflower Pumpkin Stencil
A large sunflower with roughly twenty lance-shaped petals radiating from a solid circular center disk fills this expert pumpkin stencil. Each petal is an individual pierce-through slot, separated from adjacent petals by a thin curved wall of pumpkin, and the disk center is also carved out. The lit jack-o-lantern blazes like a radiant wheel of light with the petal gaps glowing and the petal walls casting narrow spokes of shadow. Begin carving at the inner petal bases nearest the center disk before working toward the tips, keeping the disk cut for last so the petal ring retains its structural support.
Surprised Emoji Pumpkin Stencil
The surprised face emoji is translated into a pumpkin stencil with wide round eyes, a furrowed brow, a small nose bump, and a large open oval mouth. The face disc is partially cut away around the perimeter leaving a crescent of solid pumpkin at the top and right side; the eyes are rings with solid centers, and the mouth is a solid oval pierce. When lit, the face glows with an expression of shock. Carve the ring-shaped eye borders carefully: cut the outer circle first, then the inner pupil circle, leaving the solid dot of pumpkin wall between them untouched to preserve the iris-ring detail.
Surprised Ghost Pumpkin Stencil
A ghost face with two large oval eyes, a small heart-shaped nose, and a wide rounded mouth with a tiny tooth bump stares out from this simple pumpkin stencil. All four features are individual pierce-throughs floating in the pumpkin surface. When lit, the glowing eyes and mouth give the jack-o-lantern a look of wide-eyed astonishment. Since the four cutouts are widely spaced with generous pumpkin wall between them, cut the small heart nose last: its concave top curve requires care and the surrounding rigid wall makes it easiest to score clean inward curves.
Swift in Flight Pumpkin Stencil
A swift in full dive displays wide-spread wings and a deeply forked tail in this bird pumpkin stencil, its entire silhouette carved as one large open shape. The wing tips show a ragged, feathered edge that gives the design energy when lit; that serrated border is the most fragile detail. Score those feathered wingtip notches with short, shallow plunge cuts before removing the main wing mass, so the delicate points separate cleanly rather than tearing.
Swooping Bald Eagle Pumpkin Stencil
A bald eagle swoops down with wings fully spread in this striking pumpkin stencil, its feathers rendered as a fan of elongated oval cutouts radiating from the body while the torso, tail, and talons are larger open shapes. The mosaic of separate feather pierces makes the wings blaze with light and gives the design a dramatic stained-glass quality. Cut the smallest outer wing-tip feathers first while the wall is firmest, then work inward toward the body to avoid weakening the center before the delicate tips are done.
T-Rex Pumpkin Stencil
A fleshed-out T-rex stands upright in this dinosaur pumpkin stencil, with a large skull showing serrated teeth, tiny forelimbs with claw tips, a muscular body, and thick hind legs with three-toed feet rendered as solid orange pumpkin wall. The spaces between and around the figure are cut through, so the lit jack-o-lantern silhouettes the dinosaur in warm orange against a glowing background. Cut the narrow gaps between the forelimb claws and the small toe gaps first before opening any of the large surrounding sections, as those tight details are easier to control while the wall is fully rigid.
T-Rex Pumpkin Stencil
A T. rex tears across this expert pumpkin stencil in a side-profile attack pose: massive jaws open wide with individual pointed teeth, a large round eye socket, muscular body sections, short forearms with clawed fingers, and powerful hind legs with three-toed feet all rendered as separate cut-through shapes. The jagged teeth line along the upper jaw is the most technically demanding element. Cut each tooth gap individually from the back of the jaw toward the snout tip, finishing the tooth row before opening the large body cavities so the wall stays rigid during the fine work.
Tears of Joy Emoji Pumpkin Stencil
This emoji pumpkin stencil captures the classic tears-of-joy face: a large circular outline frames squinting crescent eyes, a wide open-mouth smile, and two teardrop shapes streaming from the outer eye corners. Most of the interior is pierced through, leaving thin curved bridges for the eyes, brow shapes, and a tongue strip inside the mouth. When lit, the laughing face reads instantly from across a porch. Keep the two small teardrop cutouts for last, as they are isolated from the main body and can shift if the stencil loosens.
Teddy Bear Pumpkin Stencil
A seated teddy bear with tattered, drip-edged fur fills this hard-level pumpkin stencil: a round head with small round ears, two circular cheek spots, a nose-and-muzzle cutout, and a tummy split into two glowing panels flanked by small round paws. The ragged fur silhouette along the top of the head and across the body creates dozens of short, jagged points that must stay connected. Work from the center facial features outward, and avoid pressing too hard on the bear's narrow fur-tip points so they do not snap before the larger belly sections are removed.
Tennessee Pumpkin Stencil
Tennessee's wide, almost rectangular state outline is cut as a single open silhouette in this pumpkin stencil, with the stepped notch on the upper-left edge and the jagged western corner representing the state's distinctive border. When lit, the entire shape glows as one bold window of light. Because the outline follows an irregular path with several sharp interior corners along the southern border, score each angle carefully and complete one full corner before moving to the next to avoid cracking the skin at the tight turns.
Texas Pumpkin Stencil
Texas's iconic state outline is cut as a single open silhouette in this pumpkin stencil: the rectangular panhandle at the upper left, the broad body tapering to the pointed southern tip, the ragged Gulf Coast along the eastern lower edge, and the squared-off western side. Lit from inside, the whole shape glows as an unmistakable Lone Star State window. The most demanding section is the lower Gulf coastline, where repeated small indentations create a saw-tooth edge; make these cuts last and use a narrow blade to follow the fine detail without breaking the points.
Three Bats Pumpkin Stencil
Three snarling bats in different sizes swoop across this bats pumpkin stencil: one large bat dominates the lower center with wide jagged wings and a gnashing face, a medium bat flies mid-right, and a small bat trails upper-left, all fully pierced through. The graduated scale creates depth on the jack-o-lantern face, and because the large bat's wing tips are long and thin, cut those points last after the broad wing voids are already removed to avoid snapping them during the heavy cutting.
Thumbs Down Emoji Pumpkin Stencil
A thumbs-down hand emoji is the subject of this easy pumpkin stencil: a clenched fist with four horizontal oval finger cutouts stacked on the right side, a large curved palm-and-back-of-hand mass pierced by a banana-shaped opening on the left, and a downward-pointing thumb teardrop at the bottom. The lit result shows the negative space of the knuckles and palm glowing while the solid pumpkin skin traces the finger outlines. Cut the four finger ovals first while the surrounding skin is still rigid, then remove the larger palm opening.
Thumbs Up Emoji Pumpkin Stencil
A thumbs-up hand emoji fills this easy pumpkin stencil: a large upward-pointing thumb teardrop at the top, a broad curved palm-and-knuckle mass in the center, four stacked horizontal oval finger cutouts on the right, and a small curved side-panel on the left. When lit, the stacked ovals glow as distinct bright bars above the palm opening, reading immediately as a raised-fist thumbs-up. Cut the four finger ovals before removing the larger central palm section so the surrounding skin remains firm while you make the smaller, more precise cuts.