Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
202 results · Page 2 of 6
Crescent and Eight Stars
A large crescent moon curves along one side of the pumpkin while eight stars of varied sizes scatter across the rest of the face. Moon and stars are all cut-through openings, turning the pumpkin into a bright celestial lantern with plenty of glow for a dark porch. Eight stars push this to a medium carve simply on repetition, so rotate the pumpkin as you go and cut every star point with a pull stroke toward the center for clean tips.
Crescent and Four Stars
A thick crescent moon anchors the left side of the pumpkin while four five-pointed stars drift across the remaining space. All five elements are clean cut-through openings, so the pumpkin becomes a night-sky lantern with the untouched rind acting as the dark sky between them. It is an easy carve overall; the only care point is the star tips, so cut each star point-to-center in single strokes rather than trying to steer around the whole outline at once.
Crescent and Four-Ray Sun
A tall crescent moon pairs with a four-ray sun whose points frame a solid circle of rind at its center, creating a striking celestial emblem. The crescent and the four triangular rays are pierced through, while the sun's middle disc stays attached as a floating island of pumpkin skin. At medium difficulty, cut the four rays individually and avoid nicking the center circle's edge, since that untouched disc is what makes the sun read.
Crescent and Three Stars
A large crescent moon curves down one side of the pumpkin while three five-point stars of different sizes float beside it. All four shapes are cut cleanly through the wall, turning the pumpkin into a glowing night sky that is simple enough for a first-time carver. Since this easy design relies on smooth curves, trace the crescent's inner arc slowly and pop each star out point by point rather than in one piece.
Crescent Eyes and Broad Smile
Two upswept crescent eyes squint with joy above an enormous open smile that stretches nearly the full width of the pumpkin, curling up into playful points at each corner. Just three cut-through openings make the whole face, with no nose, teeth, or fragile bits anywhere. This easy design is pure beginner fun; carve the big smile first while the wall is strongest, then the two eye crescents, angling your blade slightly outward so the pieces push free cleanly.
Crescent Eyes and Curved Smile
Pure cheer: two upturned crescent eyes squint with delight above a huge toothless smile that curls up at both corners. All three shapes are pierced through so the whole face beams with candlelight, and the matching curves give it a warm, laughing character. This easy pattern rewards smooth cutting; saw each crescent in one steady motion following the curve, and round off the smile's corners rather than leaving sharp points.
Crescent Moon & Small Bat
A small bat with scalloped wings glides across a big crescent moon in a classic Halloween night scene. Both shapes are shaved rather than pierced: the moon is peeled into a bright smooth crescent, the bat's wings are etched at a lighter depth, and its body stays as raised rind. A hard shading pattern that rewards patience; keep the moon's inner curve clean since that long sweep frames the entire design.
Crescent Seven Stars Six Dots
A large crescent moon glows at the left while seven chunky five-point stars and six round dots scatter across the rest of the pumpkin like a full night sky. Every moon, star, and dot is pierced through, so the whole surface twinkles when lit. Space your cuts out as you go, alternating sides of the pumpkin, so the wall keeps its strength until the final star is freed.
Cross in an Oval Ray Field
An ornate flared cross stands at the center of an oval field of sunburst rays that radiate outward to the design's edge. It is carved entirely in continuous-wall relief: the cross is left raised with beveled edges while the rays are shaved to alternating depths so light plays across the whole medallion. This hard shading piece rewards patience, so establish the cross outline deep and clean first, then carve every ray from the cross outward to keep the bevels crisp.
Cross With Ten Rays
A bold cross anchors the center of the design while ten tapered rays burst outward around it like beams of light. The cross and every ray are pierced through, leaving dark shell between them that frames the radiating pattern. Cut the large cross first to relieve pressure on the wall, then work each ray from its wide outer end toward the narrow tip so the points finish clean.
Deer Skull and Rifles Pumpkin Stencil
Two crossed hunting rifles sit below a buck's-head silhouette with a full multi-point rack of antlers, forming a classic skull-and-crossbones arrangement in a hunting theme. All three elements are cut out as open silhouettes, so the rifles and antlers glow as bright orange shapes against the dark pumpkin. The junction where the rifle stocks cross is a narrow pinch point; trace that intersection carefully and cut each rifle as a separate pass rather than one continuous stroke to preserve the crossing bridge.
Diamond Nose and Three Teeth
This is the timeless jack-o'-lantern: two triangle eyes, a diamond nose, and a wide crescent grin interrupted by three blocky square teeth, one hanging from the top lip and two rising from the bottom. Everything except the teeth is cut through, with the teeth left as standing tabs of shell. It is an easy, forgiving first carve; cut toward each tooth from both sides rather than sawing across it, so the tabs never take sideways pressure.
Die and Pawn on Curved Board
A six-sided die and a classic rounded game pawn sit side by side on a curved, segmented game board path. The die faces, pawn silhouette, and board track are shave-carved so they glow in warm relief, with the pips scooped deeper for contrast; nothing pierces the wall. Shade the two big shapes first, then dot in the pips with a small round gouge, keeping each one the same depth so the die reads evenly.
Dracula Pumpkin Stencil
This easy vampire pumpkin stencil shows a classic jack-o-lantern face with two arched, angry eyes sporting jagged inner cuts, a small triangular nose, and a wide curved mouth lined with sharp teeth including prominent fangs at each corner. All the facial elements are carved through as open voids, leaving the surrounding face solid. The wide-open mouth is the largest single cut; take it in two or three sections, pausing at each tooth point, to keep the thin tooth tips from snapping off.
Eight-Bridge Circular Smile
A big circular smiley face beams from the pumpkin, drawn with a segmented ring outline, two oval eyes, and a wide upturned smile with curled corners. The ring, eyes, and mouth are all cut through, while small bridges break the circle into sections that keep the face anchored to the shell. Leave every bridge intact until the end so the outline ring stays firmly attached.
Fire Helmet Above Three Flames
A classic firefighter helmet, complete with front shield and wide brim, glows above three dancing flames in this tribute design. The helmet crown, brim, and each flame are separate cut-through openings, with skin bridges keeping the helmet's shield outline dark against the light. At medium difficulty, the flame tips are the fussy part; saw each flame from its wide base up toward the point, and cut the helmet's thin brim opening last when you can support the wall from inside.
Five Stars Around a Crescent
A crescent moon anchors one side while five stars and a scattering of small round dot holes twinkle across the rest of the pumpkin like a busy night sky. Every element is cut through, and the pattern wraps wide, which suits a bumpy or warty pumpkin beautifully. The medium rating comes from the sheer count of pieces, so drill or punch the little dots first as reference points, then carve the stars and finish with the big crescent.
Five-Panel Soccer Ball
A giant soccer ball covers the face of the pumpkin, built from a central pentagon surrounded by shaved hexagon panels. Nothing is cut through; you peel the skin from the light panels while the pentagons and seam lines stay dark orange, recreating the classic ball pattern. Trace every panel edge with a knife tip before shaving so the straight seams stay crisp, since clean lines are what sell the geometry.
Flexed Bicep Emoji Pumpkin Stencil
A muscular arm bent at the elbow in the classic flexed-bicep emoji pose fills this easy emoji pumpkin stencil, with the large upper arm and forearm cut away as open voids and the thin wrist and elbow-crease lines left as pumpkin-skin bridges. The two sections of the arm void are separated by the elbow-crease bridge, which is the slimmest part of the design. Carve the forearm section below the crease first, then remove the upper arm, so the crease bridge is never cut from two sides at once.
Flying Saucer Tractor Beam Pumpkin Stencil
A flying saucer in classic 1950s style beams down a tractor ray in this pumpkin stencil, featuring a domed disc with a small fin on top, a row of oval porthole cuts across the hull, a central undercarriage dome, and a wide triangular tractor beam with three internal vertical ribs extending down to a landing ellipse. The portholes, beam sections, and surrounding sky area are pierced through. Carve the small oval portholes along the saucer rim first to keep the disc structure stable before opening the large tractor beam below.
Four Diamonds and Eight Dots
Four diamonds run in a straight column down the front of the pumpkin, flanked by a staggered row of round dots on each side, turning a tall pumpkin into a modern lantern. All twelve openings are cut through, and their regular spacing is what sells the design. Mark the vertical centerline first and measure each diamond's position before cutting, since even spacing matters more here than fancy knife work.
Four Sails Above Three Waves
A pirate ship rides three rolling waves, its mast carrying four billowing sail panels and a small flag snapping at the top. The sails, hull, flag, and waves are all cut through, while the mast and yard lines are strips of rind left between the openings to hold the rigging together. Those mast strips make it a medium carve: cut the four sail windows one at a time, always slicing away from the mast strip so you never lever against it.
Four-Toed Paw Above Broad Bone
A four-toed paw print floats above a big classic dog bone, a simple two-part salute to the family pup. Both shapes cut fully through: the four toe pads and rounded palm glow as separate openings, and the chunky bone shines below them. It is a forgiving beginner carve because every shape is wide and rounded; just space the toe pads carefully when transferring the pattern so the skinny walls between them stay intact.
Four-Tongue Flame
One big flame fills the face of the pumpkin, its four licking tongues tapering to sharp points just like the classic fire symbol. The entire flame is a single cut-through shape, so candlelight literally becomes the fire. This is an easy carve with only one piece to remove; poke the pattern deeply at each flame tip first, then saw from the rounded base upward so the narrow points come out clean instead of ragged.
Friendly Jack-o-Lantern Pumpkin Stencil
Two rounded horseshoe-arch eyes, each with a small bump notched from the bottom to suggest eyebrows, and a broad curved mouth split by two square bottom teeth define this easy pumpkin stencil. The asymmetry between the left eye (fuller arch) and the right eye (slightly smaller, offset notch) gives the face a winking or quizzical personality. All cut-outs are generous and smooth, making this a good pumpkin stencil for carvers who want a friendly face without tiny fiddly pieces. Leave the two small inner-eye notches for last so the arch stays rigid while you cut the mouth.
Georgia State Shape
The full outline of Georgia is removed as one big opening, from the straight western border to the jagged Atlantic coastline in the southeast. Everything inside the state shape gets cut away while the pumpkin wall around it stays intact, giving you a bright glowing map. Trace the bumpy river border on the west side carefully; the rest is long smooth strokes suited to a medium skill level.
Giant Nose and One Tooth
A big-hearted face dominated by an oversized triangle nose, flanked by two small round eyes, with a wide crescent smile carrying one square tooth. Every feature is cut through, and the giant nose becomes the brightest window on the whole pumpkin once the candle goes in. An easy pattern with generous shapes; cut the huge nose last so the wall keeps its strength while you work.
Golf Iron with Dimpled Ball
A classic golf iron leans behind a dimpled ball sitting in a tuft of rough grass, all done in skin-shave shading with no pierced openings. The club face grooves, ball dimples, and grass blades are etched at varying depths so each element glows in its own warm tone. Score your outlines first, then shave between them; the fine groove and dimple details reward a light touch.
Goofy Three-Tooth Grin
A lovable goofy face with two big round eyes, a small triangle nose, and a wide smile broken up by three blocky teeth. Every shape is a full cut-through opening, so the eyes, nose, and mouth glow while the rest of the pumpkin stays untouched. It is a great first stencil; start with the smallest tooth cuts before opening the large mouth so the wall stays sturdy.
Happy Crescent-Eyed Grin
A cheerful jack-o'-lantern face with sweeping crescent eyes, a small notched nose, and a wide grin framed by two pointed fangs and blocky lower teeth. Every feature is cut fully through so the whole face glows. The crescent eyes taper to fine points, so use a thin saw and cut toward the tips from both directions to keep the corners crisp.
Happy Halloween Text Pumpkin Stencil
The words HAPPY HALLOWEEN appear in two stacked lines of wide block capital letters in this pumpkin stencil, the typeface clean and bold with squared serifs and open counters inside letters like A, P, O, and E. Every letter is a cut-through opening, so the lit jack-o-lantern displays a glowing two-line greeting. Before carving, identify the enclosed counter islands inside closed letters such as the inner triangles of A and the inner ovals of O and P, and cut those small interior pieces out first so each island stays anchored until its surrounding letter walls are removed.
Heart Cheeks and Eight Dots
An irresistibly cute kawaii face: two tall oval eyes, a tiny curved smile, a heart-shaped blush on each cheek, and eight little sparkle dots scattered around the edges. Every element is a small pierced opening, and the wide spacing across a squat pumpkin gives it that classic sticker-art charm. At medium difficulty the hearts and dots demand patience; use a drill bit or apple corer for the round sparkles to keep them perfectly circular.
Heart Eyes Jack-o-Lantern Pumpkin Stencil
A classic jack-o-lantern face gets a romantic twist: two heart-shaped cutouts replace the usual triangle eyes, each framed by three curling eyelash strokes, above a wide crescent grin with three rectangular tooth gaps. The design is beginner-level with large, easy-to-cut openings and gentle curves throughout. Cut each heart eye from the inner point downward and around the lobes rather than starting at the curved top, which helps you keep the heart shape symmetrical on the pumpkin's curved surface.
Heavy-Brow Angry Face
This scowling jack-o'-lantern glares out through heavy slanted brows, a small triangle nose, and a snarling mouth ringed with sharp fangs top and bottom. Every feature is a pierced opening, leaving thick pumpkin wall between the angry eyes and the jagged mouth for strength. At medium difficulty the narrow inner brow points are the fragile spots, so cut the eyes from the center outward and save the thin corners for last.
I Love Alabama Pumpkin Stencil
This Alabama pumpkin stencil spells out the classic "I Love" message using a bold block letter I, a large solid heart, and the two-letter state abbreviation AL set in rounded block type. All four shapes are cut through as separate open pieces, so the finished jack-o-lantern shows glowing letters and a bright heart on an orange field. Because the A has a triangular counter at its center, cut around that interior triangle carefully so it stays in place as a solid island that keeps the letter readable.
I Love Maryland Pumpkin Stencil
Built on the classic "I Love" tourist-logo format, this Maryland pumpkin stencil shows a small serif "I", a large smooth heart, and the bold two-letter abbreviation "MD" in blocky rounded type arranged in a two-row grid. All shapes are cut through entirely, giving the finished jack-o-lantern high contrast against candlelight. The "D" has an open interior, so keep your blade angled slightly inward on that curve to prevent the narrow outer wall from cracking.