Similar pumpkin stencils
View all stencils βAbout this stencil
The Hat Trick pumpkin stencil is a free printable PDF template. Print it, tape the pattern on, and trace it onto your pumpkin. A giant soccer ball covers the face of the pumpkin, built from a central pentagon surrounded by shaved hexagon panels. Nothing is cut through; you peel the skin from the light panels while the pentagons and seam lines stay dark orange, recreating the classic ball pattern. Trace every panel edge with a knife tip before shaving so the straight seams stay crisp, since clean lines are what sell the geometry. It makes a fun jack-o'-lantern design for Halloween night. It is rated Intermediate. Estimated time: 90-120 minutes. Actual time varies with preparation, pumpkin size and experience. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a continuous-wall shading design: you never cut all the way through the pumpkin. On the printable pattern, light gray regions get just the skin shaved off for a faint glow, dark gray regions are scraped deeper so more light comes through, and white areas keep their skin untouched. The numbers give you the safest working order. Plan on about 90-120 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the wall to about 1 inch behind the design so light can pass through the shaded areas. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer the outlines by poking dots along every line. Work with a loop tool, clay ribbon scraper, or the back of a spoon rather than a saw.
Shading order
- Trace the five peeled panels. Scrape the five large gray panels and five narrow rim arcs shallowly. Keep the central white pentagon, other white patches, seam gaps and background entirely intact. The central pentagon points upward between the two top panels.
- Round the panel centers. Deepen the five dark-gray panel centers marked 2. Keep their pale polygon borders shallow, along with every unnumbered rim arc. Fine scrape grain becomes broad highlights; check the ball with an LED and never pierce its wall.
Check your progress often: set a bright LED inside and dim the room lights, and the glow shows exactly where to scrape deeper. Go slowly near thin spots and stop before the wall flexes; a pierced wall cannot be undone.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
IntermediateCorner Kick Pumpkin Stencil
A full soccer ball fills the pumpkin's face, with a dark pentagon at its center surrounded by glowing hexagonal panels and a bright outer ring. The panels are shaved down to the flesh rather than pierced, so the seam lines and center pentagon stay as raised skin while the shaved sections glow softly. For this medium shading design, score every seam line first, then peel each panel with a flat gouge, keeping depth even so all the panels light up uniformly.
IntermediateThe Daisy Wheel Pumpkin Stencil
Eight teardrop petals radiate around a central circle cutout, like a glowing daisy or sunburst wheel. Every teardrop and the center are pierced clean through, turning the pumpkin into a lantern that throws petal-shaped light across the porch. Cut the center circle first as your anchor point, then work around the ring, alternating sides so the wall stays balanced as you go.
IntermediateBadge of Honor Pumpkin Stencil
A six-point badge star shines above two stacked chevron stripes, with three small dots arcing over the top like a crest. Every shape is cut fully through the wall, giving the design the crisp look of a service badge or rank insignia glowing on the porch. Cut the chevrons from their outer ends toward the center points, and keep the rind strip between the two stripes intact for a clean military edge.
IntermediateHexagon Hive Pumpkin Stencil
Seven hexagonal honeycomb cells of slightly different sizes cluster together, each one a glowing six-sided window separated by thick shared walls. Every cell is cut fully through, and those chunky connecting walls are what keep the pumpkin strong, so resist the urge to slim them down. Cut each hexagon side as its own straight stroke, finishing the corners cleanly with the knife tip, and start with the center cell to anchor the layout.
IntermediateSeaside Fan Pumpkin Stencil
A fan-shaped scallop shell spreads seven glowing ribs from a hinged base, crowned by three small round dots floating above like sea spray. Each rib is its own cut-through opening separated by strips of intact wall, so the shell keeps its elegant ridged look when lit. Cut the center rib first and work outward symmetrically, keeping the dividing strips at least a finger-width so the fan stays strong.
IntermediateModern Mosaic Pumpkin Stencil
Nine triangles in alternating sizes form a tidy three-by-three grid, with six small round dots tucked into the gaps between rows. Each triangle and dot is cut straight through, producing a clean modern lantern that glows like patterned tilework. This medium design is all about alignment, so tape the template securely, transfer every corner point before cutting, and carve the triangles row by row to keep the grid looking sharp and even.





