Similar pumpkin stencils
View all stencils βAbout this stencil
Download the Grand Slam pumpkin stencil as a free printable PDF, then tape the pattern to your pumpkin and trace the lines. A baseball with curved stitch seams sits front and center over two crossed bats, a classic team-spirit emblem sized for a porch pumpkin. The ball, bats, and stitching are all shaved into the skin rather than pierced, so the emblem glows softly while the pumpkin wall stays whole. On this medium shading piece, shave the bats and ball to one even depth, then cut the stitch lines noticeably deeper so they show as dark laces against the bright ball. It works as a carving template for a Halloween jack-o'-lantern or a fall porch display. It is rated Intermediate. Estimated time: 90-120 minutes. Actual time varies with preparation, pumpkin size and experience. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a continuous-wall shading design: you never cut all the way through the pumpkin. On the printable pattern, light gray regions get just the skin shaved off for a faint glow, dark gray regions are scraped deeper so more light comes through, and white areas keep their skin untouched. The numbers give you the safest working order. Plan on about 90-120 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the wall to about 1 inch behind the design so light can pass through the shaded areas. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer the outlines by poking dots along every line. Work with a loop tool, clay ribbon scraper, or the back of a spoon rather than a saw.
Shading order
- Trace the ball and crossed bats. Scrape all gray areas shallowly. Preserve both white bowed seams and seven white stitches along each seam. Keep the background and gaps between ball and bats untouched. Follow the rounded barrel ends and small knobbed handles.
- Brighten ball and bat centers. Deepen the dark-gray ball around its retained seams. Deepen both broad barrel highlights marked 2 and both narrow unnumbered handle highlights. Keep pale edges and handle knobs shallow. Inspect the glow with an LED without piercing the wall.
Check your progress often: set a bright LED inside and dim the room lights, and the glow shows exactly where to scrape deeper. Go slowly near thin spots and stop before the wall flexes; a pierced wall cannot be undone.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
AdvancedNinth Inning Pumpkin Stencil
A big tilted baseball sits front and center over two crossed bats, with the ball's curved stitch seams and the bats' wood grain all rendered in shaved skin. This is a continuous-wall shading design, so you peel the skin to different depths rather than piercing holes; deeper shaving makes the ball glow brightest. Rated hard for its layered detail, it rewards patience: establish the crossed-bat outlines first, then texture stitches and grain last.
AdvancedBaseball & Crossed Bats
A big baseball with curved stitch seams sits front and center over two crossed bats, carved as a raised emblem in the pumpkin's surface. Nothing is pierced; instead you shave away the skin around the ball and bats so the design stands out in relief, with the stitching etched as shallow grooves. This hard shading design rewards patience: use a loop tool to clear the background evenly and keep your etch depth consistent so daylight viewing looks clean.
IntermediateStarlit Flutter Pumpkin Stencil
A bold bat rises with scalloped wings spread wide while four small stars twinkle around it. The bat and every star are cut completely through the wall, turning the pumpkin into a glowing night-sky scene. The bat is one large connected opening, so it carves fast; poke a starter hole in the middle of the body and saw outward toward the wing scallops, finishing the little stars last.
IntermediateDusk Wing Pumpkin Stencil
A wide-winged bat hangs in the center of a glowing scalloped panel, its scalloped wing edges and small round eyes standing out in dark relief. You shave the skin away around the bat so the shape stays raw pumpkin while the shaved field lights up behind it. Keep your shading depth even across the whole panel so the backlight glows uniformly around those wing scallops.
Beginner-friendlyVelvet Swoop Bat Pumpkin Stencil
Print the Velvet Swoop Bat pumpkin stencil with a numbered cutting pattern and step-by-step guide. Easy design; print at actual size.
Beginner-friendlyShadow Swoop Pumpkin Stencil
A wide flying bat spreads scalloped wings across the pumpkin, with two pointed ears rising from its round head at the center. The entire bat is a single pierced opening, so the glowing silhouette needs no interior bridges or fragile details. Follow the scalloped bottom edge of each wing with short curved strokes, letting the saw complete one scallop at a time for a smooth, even wingline.





