Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
62 results · Page 2 of 2
One-Eyed Furry Monster Pumpkin Stencil
A round, furry one-eyed monster stands full-body on this hard pumpkin stencil: a small round head with two stubby antennae sits atop a wide spherical body edged with shaggy fur, two four-fingered hands extend to either side, and two thick legs end in rounded shoes at the bottom. The mouth is a wide toothy grin with individual tooth gaps cut into the lower body. Carve the large body outline first since the shaggy fur spikes are easier to cut when the surrounding pumpkin skin is still firm; save the small tooth gaps inside the grin for last.
One-Eyed Horned Monster Pumpkin Stencil
A squat, wide-bodied one-eyed monster fills this hard pumpkin stencil from head to toe: a large circular head that doubles as the body, a single giant eye at center made of three concentric rings with a crescent cut-out pupil, two small curved horns at the top, three-clawed hands on short arms at each side, and a wavy skirt-like bottom hem. The three concentric eye rings are connected by thin skin bridges and are the most fragile element; carve the outermost eye ring first and work inward, letting each ring dry slightly before cutting the next.
One-Eyed Worm Monster Pumpkin Stencil
A quirky one-eyed worm-like creature stands upright in this animals pumpkin stencil: a large circular head with a concentric inner eye ring and a crescent pupil, small antenna nubs around the head rim, a fanged grinning mouth, two tiny three-fingered arms raised at its sides, a long segmented body with ringed markings, and curling feet at the base. The thin connecting lines between head, body, and limb segments are the most fragile parts of this carving. Cut the small finger and toe tips before the body-segment cuts so the creature's extremities have maximum wall support.
Quartered Eye and Zigzag Grin
A huge single eye quartered by a bold plus-shaped bar dominates this monster mask, flanked by rows of diamond cutouts down each cheek, a tiny skull-like nose, and a jagged zigzag grin along the bottom. The eye quadrants, diamonds, nose, and zigzag are all cut through, with the plus bar and diamond lattice left as connected skin. This hard design demands order: carve the four eye sections first, then diamonds from the center outward, protecting that thin cross bar throughout.
Round Cartoon Monster Pumpkin Stencil
A small round cartoon monster occupies this pumpkin stencil: a chunky body with two large circular eyes, a frowning row of square teeth, a curly stem-like antenna on top, sideways horns, stubby arm appendages, and splayed feet all carved as separate islands of light. The design has many floating cut-through pieces spread across the face of the pumpkin. Start with the two circular eye holes since they are the most central reference points, then position the surrounding appendage cuts relative to them.
Round Eyes and Six Mouth Slots
Two big blank circle eyes stare out beneath short angled brow slits, while the wide mouth is broken into six upright rectangular slots that glow like stitched or fenced-off teeth. Everything is cut through, and the plain round eyes with no pupils give the face its unsettling, vacant charm. The vertical mouth bars keep this an easy carve; cut every slot top-down in the same direction so the strips between them stay straight and even.
Scary Clown Pumpkin Stencil
A snarling clown jack-o-lantern face fills this hard-level pumpkin stencil, with wild flame-like tufts of hair radiating from both sides, a menacing brow ridge, swirling round eyes with small pupils, and a wide mouth packed with jagged triangular teeth. The dense ring of hair pieces are cut through while the circular eye centers and curved nose remain as solid orange bridges. Cut the central face shapes first, then work outward to the individual hair flames so each spike stays supported until the very end.
Silly Monster Pumpkin Stencil
A shaggy round monster with a small zigzag hair antenna on top, wide round eyes, a grinning row of rectangular teeth, and two outstretched hands with four or five digits fills this funny pumpkin stencil, with about eight to ten interior pierced slashes representing the fur texture along with the facial features and foot claws. The lit pumpkin reveals the entire creature in warm orange silhouette against a dark background. Cut the large central body void first, then work through each interior fur slash and claw detail, leaving the two floating hand cutouts for last.
Six Spoke Cyclops and Fangs
An ornate one-eyed monster dominated by a giant spoke-wheel eye with six radiating spokes, surrounded by swirling filigree flourishes, teardrop cutouts, and a vast fanged grin ringed with diamond and dot accents. The entire composition is pierced through in an intricate lattice, leaving a delicate web of pumpkin between the glowing shapes. Strictly an expert project: use a fine-detail saw, carve the small accents before the large wheel and mouth, and support the wall from inside as it thins.
Slanted Eyes and Six Slashes
A ferocious face glares out through slanted slit-pupil eyes above a fanged snarl, with three sweeping slash marks flaring from each cheek like whiskers of fury. The eyes, nostrils, toothy mouth, lower jaw slot, and all six cheek slashes are cut through the wall for a blazing, aggressive stare. At medium difficulty, save the long tapered slashes for last and cut them thin at the tips so they flick outward like real claw marks.
Snarling Split-Mouth Face
This snarling jack-o'-lantern glares through slanted, angry eyes above a flared triangular nose and a huge split mouth bristling with long fangs and jagged lower teeth. The eyes, nose, and mouth are all cut through, while thin skin bridges hold each fang in place against the glow. Rated hard because of those narrow tooth bridges; carve the fangs last with a fine saw and leave extra width until the final pass.
Teardrop Eyes Stitched Smile
Two droopy teardrop eyes hang over a long curving smile crossed by short stitch marks, giving the face a sweetly sinister rag-doll look. The eyes and the full stitched mouth are pierced through, with each stitch cut as a small notch branching off the main smile line. At medium difficulty, carve the long mouth curve first, then add the stitch notches one at a time so the thin rind between them stays supported.
Three Eyes and Four Teeth
Three round eyes of different sizes line up above a small rectangular nose and a wavy grin broken by four square teeth, giving this mutant jack-o'-lantern a delightfully goofy personality. The eyes, nose, and mouth are all cut through, with the teeth left as tabs, and tiny freckle dots may be etched shallow on the cheeks. A medium carve mainly for tooth care; cut into the grin from between the teeth so each square tab keeps its corners.
Three Eyes and Rounded Teeth
Three round eyes line up across the brow of this cheerful monster, above a wide grinning mouth with four rounded teeth hanging from the top lip and a small diamond accent cut on each cheek. The eyes, diamonds, and mouth are cut through, with the teeth left attached to the upper mouth edge. At medium difficulty, the main care point is those hanging teeth: cut around each one gently, and try it on a green or warty pumpkin for extra monster energy.
Three Eyes and Wide Oval Mouth
A delightfully weird mutant face with three round eyes arranged in a triangle above one huge wide oval mouth. All four shapes are pierced through, and the extra eye instantly turns an ordinary pumpkin into a little alien visitor. This is an easy carve with no fragile parts; leave at least an inch of rind between the eyes and the mouth rim so the bridge stays strong.
Two Horns and Square Teeth
Two curved horns glow near the stem while slanted, angry eyes and a wide grin with square teeth complete this simple horned demon. Every feature is a pierced opening, and the shapes are big and forgiving, making it an easy carve with a wicked payoff. Cut the mouth as one band and notch the square teeth from the top and bottom edges so each tooth stays anchored to the wall.
Unequal Eyes and Crooked Teeth
This lovably lopsided face pairs one round eye with one droopy crescent eye, a triangle nose, and a huge crooked grin full of uneven square teeth, plus a pair of dot dimples on each cheek. The eyes, nose, mouth, and dots are pierced while the mismatched tooth bars stay attached. It suits odd-shaped pumpkins perfectly; cut the tooth gaps in random sizes and the wonkier it looks, the better.
Unequal Eyes and Jagged Grin
A nightmare grin stretches ear to ear, packed with dozens of jagged interlocking fangs, beneath two mismatched eyes, one wide and wild and one narrowed and crossed by scar lines, with flame like spikes radiating outward and diamond accents above and below. Nearly all of it is pierced through, leaving a web of thin rind spikes that demands real patience. Work from the center of the mouth outward with a fine saw, supporting each fragile spike as you free it on this expert carve.
Vampire Face Pumpkin Stencil
A close-up vampire face dominates this witch-category pumpkin stencil, featuring wide circular eyes with small pupils, a widow's-peak hairline, swept-back collar wings, and a gaping mouth with prominent fangs. The large open areas of the eyes, collar, and mouth are pierced through, while the face itself stays solid so the features read clearly when lit. Cut the two eye circles first to anchor your registration, then work outward to the collar wings before tackling the mouth and fang gaps.
Vampire Jack-o-Lantern Pumpkin Stencil
A classic jack-o-lantern face with a vampire twist fills this pumpkin stencil: arched brows made of two angular patches over each eye, two large irregular triangular eye openings, a small v-shaped nose cutout, and a wide gaping mouth with jagged upper fangs and a rounded lower lip. All features are separate pierced-through shapes, so the candle-lit face shows glowing eyes, nose, and teeth against the solid orange pumpkin skin. Cut the small v-shaped nose notch and the two narrow eyebrow patches first so you can use the surrounding wall for leverage when carving the larger mouth and eye shapes.
Vampire Pumpkin Stencil
A snarling vampire face in three-quarter view fills this hard-difficulty pumpkin stencil, with wild flame-like hair, hollow sunken eye sockets, a sharp cheekbone, and an open fang-lined mouth all cut through as negative space. The remaining solid pumpkin flesh forms the angular features of a classic Dracula visage. Lit from behind, the empty eye sockets and open mouth glow fiercely. Carve the eye sockets and mouth interior before tackling the outer hair flames, so the face stays firmly anchored while you work the thin wispy points.
Werewolf Face Pumpkin Stencil
A werewolf face in full-snarl fills the entire design with shaggy fur radiating outward in dozens of pointed spikes, wild round eyes, and a wide open mouth showing exposed fangs and tongue. The fur spikes are individually cut through and radiate from the face in all directions, creating an extremely dense, lacy pattern when lit. Work from the outer fur tips inward toward the face, cutting each spike cluster before moving to the face features; this keeps the many thin bridges between spikes intact and supported for as long as possible.
Wide-Eyed Hairy Monster
A wide-eyed shaggy monster stares out with round googly eyes, a snub nose, and a jagged fanged smirk, all framed by tufts of wild fur around the edges. The face and fur spikes are cut through in many separate openings, which is where the hard rating comes from. Carve the small fur tufts and eye rings before the large mouth, and leave the skin bridges between shapes untouched so the face holds together.
Wild Monster Pumpkin Stencil
A wild-haired cartoon monster character grins with an enormous open mouth in this pumpkin stencil, its jagged mane and raised arms forming the outer silhouette, while the gaping mouth interior and a large swirling single eye are the primary cut-through elements. Small outstretched finger gaps and a body hollow add secondary glow points. Cut the wide gaping mouth cavity first since it is the largest opening and removing it early prevents the pumpkin wall from bowing when you make the tighter surrounding cuts.
Wild-Haired One-Eyed Monster Pumpkin Stencil
This one-eyed monster character has a round head ringed with wild hair, a single large circular eye socket, a wide grinning mouth, and a short stubby body with splayed hands and feet. The stencil mixes solid areas (the pupil island inside the eye, the hair fringe, the torso patches) with pierced cutouts for the eye socket, mouth, and body gaps. Lit from inside, the monster's oversized eye glows brightly while the hair and body details form a dark, shaggy border. Keep the small circular island inside the eye intact, losing it turns the design from a recognizable eye into a plain hole.
Zombie Jack-o-Lantern Pumpkin Stencil
A zombie jack-o-lantern face built from two large ringed eyes with small round pupils, curved eyebrows, tiny paired nose holes, and a wide rectangular mouth filled with jagged uneven teeth above and below. The bulging eyes retain orange rings between the outer circle and pupil circle, creating a wild, spinning stare when lit. The two circular eye rings are floating islands that must be secured; after cutting each outer eye circle, press the ring from the inside so it sits flush before removing the surrounding pumpkin section.