Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
242 results · Page 3 of 7
Floppy-Eared Labrador Muzzle
A lovable Labrador face with two glowing floppy ears, round eyes, a rounded triangle nose, and an open smiling muzzle beneath. The big ear panels and the mouth cut fully through, while narrow skin bridges separate the nose from the jowl lines. A medium carve thanks to those bridges; cut the small eye and nose openings before the large ears so the face area keeps its strength while you work.
Florida State Shape
The unmistakable outline of Florida, panhandle and peninsula together, cut clear through the pumpkin wall as one bold silhouette. Everything inside the state shape is removed so the whole map blazes with candlelight against the untouched shell. Take the coastline in short relief cuts and free the panhandle last; that long thin arm is the only fragile part of an otherwise forgiving carve.
Football & Seven Laces
A big textured football fills the pumpkin face, with two end stripes and a center lace strip of seven crossing laces left in pale relief. This is a shading design: the ball's pebbled leather area is shaved to mid-depth while the laces, stripes, and outline are scraped lighter so they pop. At medium difficulty, dab the shaved leather zone with a rounded tool to build that pebble texture, keeping the lace lines crisp and untouched.
Four Sails Above Three Waves
A pirate ship rides three rolling waves, its mast carrying four billowing sail panels and a small flag snapping at the top. The sails, hull, flag, and waves are all cut through, while the mast and yard lines are strips of rind left between the openings to hold the rigging together. Those mast strips make it a medium carve: cut the four sail windows one at a time, always slicing away from the mast strip so you never lever against it.
Four Trailing Stars and Dots
Four five-pointed stars in descending sizes sweep diagonally across the pumpkin, joined by a few small round dots that read like distant sparkles. Each star and dot is cut fully through, so the cluster twinkles convincingly once a candle goes in. The star points are what make this a medium carve; drill a starter hole at the center of each star and always saw from the middle out toward each tip to keep the points sharp.
Four-Arch Rainbow
Four nested rainbow arches glow from the lower half of the pumpkin, each band separated by a strip of untouched shell. The arch openings are cut all the way through while the curved ribs between them stay in place to define the rainbow shape. Start with the smallest inner arch and work outward so the narrow ribs keep their support as long as possible.
Four-Wing Dragonfly
A graceful dragonfly spreads four broad wings from a segmented body that runs straight down the pumpkin, with two small antennae curling from its head. Nothing is pierced; instead you shave the skin inside each wing and body segment so the shapes read as pale etched panels against the orange rind. Use a loop tool and keep the shave shallow so the wing outlines stay crisp.
Frothy Four-Panel Beer Mug
A frothy beer mug fills the pumpkin, its billowing head of foam spilling over a four-panel glass body and a sturdy curved handle. This is a shaded design carved into a continuous wall, so the mug is shaved out of the skin rather than pierced, which keeps the foam bubbles and panel lines intact. Shave the foam shallow and fluffy, then go slightly deeper on the four panels so the glass glows brighter than the head.
Gear Cross and Three Dots
A chunky steampunk gear glowing around a solid crossbar, with three round rivet dots floating beside it like escaping sparks. The spaces between the gear teeth and the four windows inside the cog are cut through, while the cross-shaped bar stays attached to the pumpkin wall and holds everything together. Carve the small dots first, then the gear windows, and keep the crossbar at least a finger wide so the design stays rigid.
Gecko with Thirteen Toe Tips
A gecko sprawls diagonally across the pumpkin as one bold silhouette, splayed toes gripping and its thick tail curving away. The entire lizard is a single cut-through aperture, so the whole body glows as one connected shape with those distinctive rounded toe pads catching the light. At medium difficulty, the toes are the trick: cut each tiny pad by connecting it to its leg with a short channel, and remove the big body piece last.
Georgia State Shape
The full outline of Georgia is removed as one big opening, from the straight western border to the jagged Atlantic coastline in the southeast. Everything inside the state shape gets cut away while the pumpkin wall around it stays intact, giving you a bright glowing map. Trace the bumpy river border on the west side carefully; the rest is long smooth strokes suited to a medium skill level.
Happy Crescent-Eyed Grin
A cheerful jack-o'-lantern face with sweeping crescent eyes, a small notched nose, and a wide grin framed by two pointed fangs and blocky lower teeth. Every feature is cut fully through so the whole face glows. The crescent eyes taper to fine points, so use a thin saw and cut toward the tips from both directions to keep the corners crisp.
Haunted House & Crescent
A small haunted house with a peaked tower and a crescent moon hanging above it, arranged as a simple night scene on a curved ground line. The design is all skin-shave shading with no pierced holes, so the house, moon, and hill appear as pale carved shapes against the dark pumpkin skin. For this medium etch, outline every shape with a shallow V-cut first, then peel the skin inside the lines so the roof peaks and steeple stay sharp.
Hawaii Island Chain
The Hawaiian island chain sweeps diagonally across the pumpkin, with eight separate glowing cutouts running from Niihau and Kauai down to the Big Island. Each island is its own small pierced opening, so the surrounding shell needs no bridges at all. Carve the largest island first to get a feel for the wall thickness, then use a fine detail saw for the smaller islands so their shapes stay distinct.
Heart Cheeks and Eight Dots
An irresistibly cute kawaii face: two tall oval eyes, a tiny curved smile, a heart-shaped blush on each cheek, and eight little sparkle dots scattered around the edges. Every element is a small pierced opening, and the wide spacing across a squat pumpkin gives it that classic sticker-art charm. At medium difficulty the hearts and dots demand patience; use a drill bit or apple corer for the round sparkles to keep them perfectly circular.
Heart Eyes and Three Teeth
Two big heart shaped eyes with curling lash accents beam above a small triangle nose and a wide grin broken by three square teeth. Every shape is cut all the way through, so candlelight pours out of the hearts and the toothy smile. Take the lash flicks slowly with a fine saw, since those narrow tips are the only fiddly part of this medium design.
Heavy-Brow Angry Face
This scowling jack-o'-lantern glares out through heavy slanted brows, a small triangle nose, and a snarling mouth ringed with sharp fangs top and bottom. Every feature is a pierced opening, leaving thick pumpkin wall between the angry eyes and the jagged mouth for strength. At medium difficulty the narrow inner brow points are the fragile spots, so cut the eyes from the center outward and save the thin corners for last.
Interlocking Double Hearts
Two large hearts overlap and interlock, their outlines woven so one band passes over and under the other like linked rings. Nothing is pierced: you shave away only the skin along the heart outlines, leaving pale glowing bands against the untouched orange wall. Sketch the over-under crossings on the pumpkin before you shave, since keeping those weave points straight is the trick to this medium-level etch.
Kitten with Long Whiskers
A sweet kitten face with pointed ear triangles, big almond eyes, a small triangle nose, extra-long whisker slits sweeping from each cheek, and a dainty curled smile beneath. All features are pierced through, and the long thin whiskers are what nudge this to medium difficulty. Cut each whisker as one smooth continuous stroke rather than sawing back and forth, and the slits will glow as fine clean lines.
Large Heart and Two Paw Prints
A large heart glows at the center flanked by a full paw print on each side, every pad and toe pierced clean through the wall. It is a natural fit for pet lovers, veterinary clinics, and rescue fundraisers. Cut the eight small toe ovals first while the shell is sturdy, then the two big pads, and finish with the heart, easing around its top notch so both lobes stay symmetrical.
Leaf-Eyed Smile
A grinning jack-o'-lantern face where both eyes are replaced by seven-fingered cannabis leaves, paired with a small triangle nose and a wide smile broken up by blocky square teeth. The leaves, nose, and mouth are all cut through so candlelight pours out of every shape. The leaf points are narrow, so at medium difficulty use a fine saw and cut each finger from the tip inward to keep the serrated edges crisp.
Leaping Dolphin & Two Waves
A dolphin arcs joyfully above two rolling waves, its curved body, dorsal fin, flippers, and smiling beak all drawn in bright shaded lines. The design uses skin-shave shading only, so you scrape away the outer skin along the dolphin and wave shapes while the wall stays solid. At medium difficulty, work the long body curve in one smooth continuous pass before adding the wave lines, which keeps the leap looking fluid.
Left Wink and Six Cheek Wedges
A playful winking jack-o'-lantern: one big round open eye, one arched wink, a triangle nose, and a smiling mouth with blocky teeth, all framed by three thin whisker-like wedges slashed across each cheek. Every opening is cut through, and the six cheek wedges throw extra slivers of light. At medium difficulty, cut the large features first and finish with the skinny cheek slits, using a fine saw so each wedge tapers to a clean point.
Left-Facing Hammerhead Shark
A left-facing hammerhead shark in full profile, wide head, tall dorsal fin, and swept tail, finished with three short gill slashes behind the head. The whole body is a shaded shape: you peel the skin inside the outline down to pale flesh and leave the pumpkin wall intact. Shave with the grain in long horizontal strokes to keep the body smooth, then deepen the gill lines and eye dot last for contrast.
Lightning Bolt and Two Stars
A big lightning bolt zigzags down the center of the pumpkin, surrounded by two five-point stars and a scatter of round dots. Every shape is cut clean through, so the bolt blazes with candlelight while the stars and dots sparkle around it. The bolt is one straightforward opening with sharp interior angles; make a small relief cut at each zigzag corner so the blade can pivot without cracking the rind.
Little Etched Hedgehog
A sweet little hedgehog shown in profile, with a pointed snout, a dot eye, tiny feet, and a back full of spiky quills rendered as star-like bursts. Nothing is pierced; you shave away only the outer skin inside the outline so the pale flesh forms the hedgehog against the dark rind. Use a shallow loop tool and keep an even depth so the quill points stay crisp.
Long-Eared Puppy with Curls
An adorable puppy face with two long floppy ears hanging down the sides, big round eyes, a small triangle nose, and a happy curled smile. Each feature is cut fully through, so the whole face beams once it is lit. The ears are the largest openings and the curled smile ends are the finest cuts; start with the small mouth curls while the pumpkin wall is still rigid, then open up the big ear shapes last.
Lopsided Zigzag Grin
A cheerfully lopsided jack-o'-lantern face with one big round eye, one slanted triangle eye, and a wide zigzag grin stretching across the pumpkin. All three features are pierced fully through so candlelight pours out, while the surrounding skin stays untouched. The zigzag mouth is the trickiest part at this medium level, so cut each tooth point in two short strokes that meet at the tip instead of dragging one long sawing pass.
Lovestruck Heart Eyes Face
This lovestruck face beams with two big heart-shaped eyes under curved brows, a wide open smile showing three square teeth, and playful dot dimples on each cheek. All the features are cut through the wall, so the hearts glow brightest and instantly read as the classic heart-eyes expression. Cut the notch at the top of each heart carefully with short strokes, since that little dip is what makes the shape.
Maine State Shape
Maine's craggy outline fills the pumpkin as a single glowing cutout, from the pointed northern crown down to its famously jagged coastline. The entire state interior is removed while the rind around it stays solid, so the border reads crisply once lit. The ragged coastal edge is what makes this a medium carve: trace it slowly with a fine saw and do not worry about tiny inlets, since the overall shape sells the design from a few feet away.
Maple Leaf and Twelve Diamonds
A big pointed maple leaf glows at the center while twelve small diamonds ring it like sparks, giving the design a festive burst of fall energy. The leaf and every diamond are cut completely through, so the whole arrangement shines as one radiant cluster. At medium difficulty, carve the maple leaf's deep notches with straight relief cuts into each valley, then finish the diamonds last since their small size makes them quick and forgiving.
Margarita and Citrus Wheel
A wide-rimmed margarita glass on a slender stem, garnished with a citrus wheel notched onto the rim, its segments radiating like a tiny sun. This is a shading design: the glass, stem, and fruit are shaved to different depths so the salt-rimmed bowl reads brighter than the stem. Etch the citrus wheel's thin segment lines with a V-tool after the broad shapes are done so they stay crisp.
Martini Glass with Olive
A tall martini glass with a skewered olive resting on the rim, drawn in clean bar-sign style from the wide conical bowl down the slender stem to the round base. It carves as skin-shave shading, so the glass appears as smooth pale relief against the dark rind with no pierced openings. A medium project overall; keep your peeling depth even across the big bowl, and leave the thin stem for careful last strokes.
Massachusetts State Shape
The Massachusetts silhouette stretches across the pumpkin, complete with the unmistakable curled hook of Cape Cod flexing off the eastern end. The entire state is cut through as one opening so the whole commonwealth glows. That skinny Cape Cod arm is the trickiest part of this medium carve; leave it for last, support the wall with your free hand, and use gentle strokes so the curl does not tear loose.
Minnesota State Shape
The full outline of Minnesota carved as one glowing state-shaped window, from the flat southern border up to the jagged Arrowhead along Lake Superior. The entire silhouette is cut through in a single piece, leaving the surrounding pumpkin wall to frame it. Take your time on the notched northeast shoreline, sawing gently along each small zigzag, and pop the big piece out in sections rather than all at once.
Mississippi State Shape
Mississippi's tall rectangular profile carved as one bold cutout, complete with the wiggly river border on the west side and the small boot notch at the Gulf. The whole state is removed to glow, and the surrounding rind stays intact as the frame. A medium carve where the river edge does most of the work; saw those little curves slowly and leave the long straight eastern border for your final cut.