Similar pumpkin stencils
View all stencils βAbout this stencil
Download the Porch Margarita pumpkin stencil as a free printable PDF, then tape the pattern to your pumpkin and trace the lines. A wide-rimmed margarita glass on a slender stem, garnished with a citrus wheel notched onto the rim, its segments radiating like a tiny sun. This is a shading design: the glass, stem, and fruit are shaved to different depths so the salt-rimmed bowl reads brighter than the stem. Etch the citrus wheel's thin segment lines with a V-tool after the broad shapes are done so they stay crisp. It works as a carving template for a Halloween jack-o'-lantern or a fall porch display. It is rated Intermediate. Estimated time: 90-120 minutes. Actual time varies with preparation, pumpkin size and experience. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a continuous-wall shading design: you never cut all the way through the pumpkin. On the printable pattern, light gray regions get just the skin shaved off for a faint glow, dark gray regions are scraped deeper so more light comes through, and white areas keep their skin untouched. The numbers give you the safest working order. Plan on about 90-120 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the wall to about 1 inch behind the design so light can pass through the shaded areas. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer the outlines by poking dots along every line. Work with a loop tool, clay ribbon scraper, or the back of a spoon rather than a saw.
Shading order
- Trace glass and garnish (1). Scrape all gray regions shallowly. The bowl is marked 1. Follow its curved sides, narrow stem, oval foot and partly hidden citrus wheel. Keep the upper drink opening and background white and intact.
- Deepen the glass glow (2). Deepen the dark-gray bowl, stem and foot highlights. The broad bowl is marked 2. Leave the thin glass edges and connecting stem borders shallow. Preserve the raw opening just below the curved rim.
- Shade five citrus sections. Deepen all five dark-gray citrus sections; one upper example is marked 3 and the other four are unnumbered. Keep their pale separators and outer rind shallow. The smallest lower wedge is narrow; use short controlled scrapes. Preserve the continuous wall throughout.
Check your progress often: set a bright LED inside and dim the room lights, and the glow shows exactly where to scrape deeper. Go slowly near thin spots and stop before the wall flexes; a pierced wall cannot be undone.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
IntermediateI Heart West Virginia
Bold serif letters spell out I, a big solid heart, then W and V stacked below, the classic hometown-pride message carved in light. Each letter and the heart are cut fully through, glowing like marquee type against the dark pumpkin. Serif letters have thin corner strokes, so cut the serifs first with the knife tip before opening the thick strokes, and keep the wall between W and V at least a half inch wide.
IntermediateSunrise Rainbow Pumpkin Stencil
Three nested rainbow arcs curve over a low half circle sun, filling the bottom of the pumpkin with stacked bands of light. Each arc is cut through while narrow ribs of rind stay between the bands, which is what creates the layered glow. Keep those ribs at least half an inch wide as you carve this medium design, since they carry all the structure.
IntermediateDice and Pawn Pumpkin Stencil
A six-sided die and a classic rounded game pawn sit side by side on a curved, segmented game board path. The die faces, pawn silhouette, and board track are shave-carved so they glow in warm relief, with the pips scooped deeper for contrast; nothing pierces the wall. Shade the two big shapes first, then dot in the pips with a small round gouge, keeping each one the same depth so the die reads evenly.
IntermediateMartini Glass with Olive
A tall martini glass with a skewered olive resting on the rim, drawn in clean bar-sign style from the wide conical bowl down the slender stem to the round base. It carves as skin-shave shading, so the glass appears as smooth pale relief against the dark rind with no pierced openings. A medium project overall; keep your peeling depth even across the big bowl, and leave the thin stem for careful last strokes.
IntermediateLittle Constellation Pumpkin Stencil
Three five point stars in different sizes drift diagonally across the pumpkin, joined by a scatter of small round dots like distant starlight. Each star and dot is cut fully through, turning the whole pumpkin into a little constellation lantern. The medium challenge is the stars' inner corners; use a thin blade, cut point to point, and finish the tiny dots with a drill or apple corer.
IntermediateOktoberfest Cheers Pumpkin Stencil
A frothy beer mug fills the pumpkin, its billowing head of foam spilling over a four-panel glass body and a sturdy curved handle. This is a shaded design carved into a continuous wall, so the mug is shaved out of the skin rather than pierced, which keeps the foam bubbles and panel lines intact. Shave the foam shallow and fluffy, then go slightly deeper on the four panels so the glass glows brighter than the head.





