Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
71 results · Page 1 of 2
Baby Seal & Seven Whiskers
A chubby baby seal lounging with its tail flipped up, round dot eyes, a sweet whiskered snout, and stubby front flippers. The body is revealed by shaving the skin into a smooth pale panel while thin lines of untouched rind form the whiskers, mouth, and flipper creases. This hard shading pattern lives in those fine lines; peel the big body areas first, then carve the whiskers with light, shallow strokes so they stay crisp.
Barred Eyes and Star Cheeks
Two huge sparkling anime-style eyes, each split by a vertical skin bar, beam above a tiny smile and heart-shaped cheeks, while dozens of little stars and dots twinkle across the whole pumpkin. The eyes, hearts, stars, and dots are all cut through, leaving the eye bars intact. The sheer number of small piercings makes this a hard carve; drill all the dots first, cut the stars with a fine detail saw, and save the big barred eyes for the very end.
Bee with Three Raw Stripes
A friendly bumblebee spreads four scalloped wings wide, with a round head, curled antennae, and a plump body banded by three raw stripes. This is a shading design with no pierced holes: the wings, head, and body stripes are shaved down to pale flesh while strips of dark skin form the outlines and bands. Shave the big wing panels first, then refine the narrow antennae with a small gouge.
Bone Below Two Paw Prints
A large dog bone glows across the lower face of the pumpkin with two paw prints stamped above it, each paw built from a rounded pad and four little toes. All pieces are cut fully through, so the bone and paws shine like a porch sign for the neighborhood's favorite dog. A gentle medium carve; punch out the sixteen small toe and pad holes first, then saw the bone in halves, meeting in the middle.
Cat Face & Eight Whiskers
A sweet cat face rendered entirely in surface shading: pointed ears with inner triangles, wide eyes with crescent pupils, a small nose, a curved smile, and eight long whiskers fanning across the cheeks. Nothing is pierced through, so you shave away just the orange skin and let the pale flesh show the design. At medium difficulty, keep your scraping depth even along the thin whisker lines so they all glow with the same brightness.
Cat With Curled Muzzle
A sweet cat face fills the pumpkin with big rounded eyes, a tiny triangle nose over a curled smiling muzzle, pointed ears, and three whiskers flaring from each cheek. The large eye openings keep their pupils as attached tabs of skin, which is the trickiest part of this medium carve. Cut around each pupil tab slowly and leave its connecting bridge generous so the eyes keep their expression.
Cat With Two-Tooth Smile
A grinning cat jack-o'-lantern with triangle ears at the crown, big round glowing eyes, a small triangle nose, slender whisker slits, and a wide smile showing two square teeth. The main features are pierced through while the pumpkin skin between them forms the cat's face. This is a true easy design with big friendly shapes, so it is a great first carve for kids; just have an adult handle the thin whisker cuts with a fine saw.
Cheerful Snail & Spiral Shell
A grinning cartoon snail with a big spiral shell, a smiling face, and two ball-tipped eye stalks glows warmly from the pumpkin front. The design is shaved rather than pierced, with narrow ridges of skin left in place to define the spiral bands, body curve, and happy face. It earns its hard rating from those thin dividing ridges; shave the spiral from the center outward and keep your blade shallow so the ribs survive.
Dog Bone & Four Paw Prints
A chunky dog bone sits at the center with four paw prints scattered around it, one near each corner. Instead of cutting through, you peel away just the orange skin inside each shape so the bone and paws glow as smooth pale panels against the untouched rind. A medium shading pattern that forgives wobbles; score each outline first, then lift the skin in shallow strips with a peeler or gouge.
Floppy-Eared Labrador Muzzle
A lovable Labrador face with two glowing floppy ears, round eyes, a rounded triangle nose, and an open smiling muzzle beneath. The big ear panels and the mouth cut fully through, while narrow skin bridges separate the nose from the jowl lines. A medium carve thanks to those bridges; cut the small eye and nose openings before the large ears so the face area keeps its strength while you work.
Four Tall Toes and Notched Pad
One oversized paw print fills the pumpkin: four tall oval toes arranged in an arc above a big rounded pad with a gentle notch along its top edge. Each toe and the pad are separate cut-through openings with sturdy skin bridges between them, so the print glows in five clean pieces. It is an easy, satisfying carve for pet lovers; cut the four toes first, then the large pad, angling your blade outward so each plug pushes through cleanly.
Four-Toed Paw Above Broad Bone
A four-toed paw print floats above a big classic dog bone, a simple two-part salute to the family pup. Both shapes cut fully through: the four toe pads and rounded palm glow as separate openings, and the chunky bone shines below them. It is a forgiving beginner carve because every shape is wide and rounded; just space the toe pads carefully when transferring the pattern so the skinny walls between them stay intact.
Garden Bench Paw Print
One oversized paw print sits front and center: a broad pad below four oval toes. Nothing is pierced through; you shave away just the skin inside each shape so the pale flesh shows in a soft, even glow. Since this is an easy shading design, use a loop tool or spoon edge and keep your scraping depth consistent so every toe lights up the same.
Garden Snail & Grass
A smiling garden snail glides between tufts of grass, its spiral shell coiling into a bold center swirl. The design is pure surface work; you shave the skin from the body, shell, and grass blades so they glow pale against the dark rind, with the spiral line left raised for definition. Shave the big shell arc in one smooth pass, then use a fine gouge for the antennae and grass so they stay thin.
Heart Cheeks and Eight Dots
An irresistibly cute kawaii face: two tall oval eyes, a tiny curved smile, a heart-shaped blush on each cheek, and eight little sparkle dots scattered around the edges. Every element is a small pierced opening, and the wide spacing across a squat pumpkin gives it that classic sticker-art charm. At medium difficulty the hearts and dots demand patience; use a drill bit or apple corer for the round sparkles to keep them perfectly circular.
Heart Keyholes and Leaf Cheeks
A folk-art beauty: two heart-shaped keyhole eyes crowned with leafy sprigs, sprays of leaf cutouts fanning across both cheeks, diamond accents down the brow, and a huge grin filled with neat rectangular teeth. Every heart, leaf, diamond, and tooth gap is pierced through, creating a lacework of light. This is an expert pattern with many close-set openings, so work from the center outward and rotate the pumpkin often to keep your cutting angle comfortable.
Kawaii Mushroom Pumpkin Stencil
A kawaii-style mushroom character fills this hard pumpkin stencil, with a broad spotted cap, small horns or fins at the sides, and a round face below it showing large anime eyes and a tiny curved mouth. The cap spots are solid orange circles against a pierced cap background, and the face details are fine interior cuts within the solid round head. Carve the small circular spots on the cap before removing the large open cap area, so those circles have firm pumpkin wall behind them while you make the precise cuts.
Ladybug Pumpkin Stencil
A plump ladybug viewed from above fills this cheerful pumpkin stencil, its round spotted body divided by a center-line ridge and ringed by a curved outline, while a decorative curling head with antennae sits at upper right. The circular spots are the cut-through elements that blaze as glowing dots; the outer body outline and dividing ridge stay solid. To keep the smaller spots from cracking inward, cut the largest center spot first, then work outward to the progressively smaller ones.
Large Heart and Two Paw Prints
A large heart glows at the center flanked by a full paw print on each side, every pad and toe pierced clean through the wall. It is a natural fit for pet lovers, veterinary clinics, and rescue fundraisers. Cut the eight small toe ovals first while the shell is sturdy, then the two big pads, and finish with the heart, easing around its top notch so both lobes stay symmetrical.
Little Etched Hedgehog
A sweet little hedgehog shown in profile, with a pointed snout, a dot eye, tiny feet, and a back full of spiky quills rendered as star-like bursts. Nothing is pierced; you shave away only the outer skin inside the outline so the pale flesh forms the hedgehog against the dark rind. Use a shallow loop tool and keep an even depth so the quill points stay crisp.
Long Dog, Bone and Four Ovals
A long-bodied dachshund trots across the pumpkin as one big glowing silhouette, with a dog bone floating above and a row of four oval accents below like little paw steps. The dog, bone, and ovals are all pierced through, so the whole scene lights up brightly with just a handful of cuts. Start with a hole in the dog's belly and saw outward, taking the thin legs and tail slowly so they stay crisp.
Long-Eared Puppy with Curls
An adorable puppy face with two long floppy ears hanging down the sides, big round eyes, a small triangle nose, and a happy curled smile. Each feature is cut fully through, so the whole face beams once it is lit. The ears are the largest openings and the curled smile ends are the finest cuts; start with the small mouth curls while the pumpkin wall is still rigid, then open up the big ear shapes last.
Long-Neck Dinosaur
A friendly long-necked sauropod stands in profile, its arched neck, rounded body, four legs, and tapering tail all glowing as one connected silhouette. Because the entire dinosaur comes out as a single cutout, there are no interior pieces to manage, keeping this an easy favorite for dino-loving kids. Take your time on the skinny neck and tail; saw with gentle strokes and keep a hand braced inside the pumpkin so the narrow curves cut clean.
Moonlit Seal and Water Bands
A harbor seal rests on the shore with its head raised and tail curled up, backed by a huge full moon, drifting clouds, and bands of rippling water below. The entire scene is skin-shaved shading with no pierced holes, so the moon glows brightest behind the seal's darker sculpted body. Expert carvers should establish the moon's deep, even shave first, then build the seal with shallower graded layers so its whiskered face keeps crisp contrast.
Narwhal, Seven Bubbles & Waves
A chubby, smiling narwhal swims among seven round bubbles with stylized waves rolling beneath its tail. Nothing is pierced; the whole design is shaved into the skin so the pale narwhal body, spiral tusk, bubbles, and wave curls stand out against the untouched rind. For this hard shading project, remove skin in shallow, even layers and keep a consistent depth across the body so the narwhal glows uniformly when lit.
Oval Eyes and Round Cheeks
Two big oval eyes glow above a tiny curved smile, with a small round blush circle on each cheek that lights up like a bashful glow. All five features are pierced through, and the shapes are large and simple, making this one of the sweetest easy carves for kids to help with. Cut the little smile last with a fine blade, since that short curve is the only delicate stroke in the whole design.
Oval-Eyed Cat With Two Curls
A friendly cat face built from simple shapes: two pointed ears with inner triangles, big oval eyes, a tiny triangle nose, a curled smile, and three long whiskers sweeping out from each cheek. Every element is cut through, so the whole face lights up at once. The whiskers are just narrow slits, which is why kids can manage this one; poke each slit through with the tip of the saw and lengthen it slowly.
Playful Harbor Seal
A playful harbor seal reclines with its head up, whiskers spread, and tail flippers raised in a happy curl. Everything is done with skin shaving rather than pierced cuts, so the seal's body emerges in pale relief with darker skin left for the eyes, nose, and whisker dots. It rates hard because of the fine facial detail; use a small gouge for the whisker spots and shave the body in smooth, even layers.
Princess Pumpkin Stencil
A cartoon princess stands front-facing on this pumpkin stencil, wearing a three-paneled ballgown, a crown at the top of her head, and wavy hair falling to her shoulders. Small pierced shapes define her eyes, rosy cheeks, and smile, while the gown panels and arms are formed by narrow white-space divisions in the solid orange wall. When lit, the princess glows as a warm silhouette with delicate facial details. Cut the tiny eye and cheek shapes first with a detail blade before removing any of the larger body sections.
Rainbow and Two Clouds
A four-band rainbow arches across the top of the design, with two puffy clouds floating beneath its ends. Each rainbow band and both clouds are cut fully through, so the concentric arcs glow in bright stacked stripes separated by thin ribs of rind. This medium pattern lives or dies by those ribs, so cut the innermost arc first and work outward, supporting each rib with your free hand as you remove the waste.
Raised Paw Cat with Tall Tail
A seated cat in full silhouette with one front paw playfully raised, pointed ears alert, and a long fluffy tail curling up beside its body. The entire cat is cut through as a single connected opening, so the whole figure glows warmly against the evening sky. An easy carve with one caution: the raised paw and tail tip are the narrowest sections, so cut them last with short gentle strokes.
Right-Facing Baby Penguin
A plump baby penguin stands in profile facing right, with a dark head and back, a softly glowing belly, and tiny webbed feet. The design is shaded rather than pierced: you shave the belly and face patches thin so they shine brightly, leave the flipper and back skin dark, and feather the transition between them. Work the big belly area with broad shallow strokes and save the fine downy texture lines for the very end.
Round Eyes and Button Nose
Two round glowing eyes, a tiny button nose, and one big sweeping smile give this pumpkin the friendliest face on the block. All four openings are cut straight through, with no teeth, brows, or tricky details to manage. It is about as easy as carving gets, ideal for a toddler's first pumpkin with adult hands on the saw; drill the eyes and nose with a round cutter, then take the long smile in one smooth curve from corner to corner.
Round Eyes and Heart Cheeks
A kawaii-style face made of two big round eyes, a gentle crescent smile, and a glowing heart on each cheek like a blush. All five shapes cut cleanly through the wall, and their simple outlines make this one of the easiest patterns in the collection. Start each heart at its top notch and cut down both lobes toward the point so the little cheeks come out in one neat piece.
Round Eyes and Square Tooth
A cheerful four-hole face: two big round eyes, a small triangle nose, and a wide upturned smile with a single square tooth hanging from the top lip. Everything is a simple cut-through opening with no fragile details, making it one of the friendliest first carves for kids helping out. Drill or trace the round eyes with a cup or cookie cutter for perfectly smooth circles.
Round Penguin with Raw Wings
A chubby cartoon penguin stands front and center with round eye patches, a little triangle beak, stubby flippers, and wide webbed feet. The design uses skin shaving instead of holes; you peel the pale belly, face, and feet down to the flesh so they glow softly while the outline stays raised. Trace the border with a shallow V cut first, then peel inward for tidy edges on this medium carve.