Pumpkin carving templates
1159 free printable stencils. Download, print, trace, carve.
113 results · Page 1 of 4
Angry Pumpkin Face Pumpkin Stencil
Two swept, blade-like eye shapes angle sharply inward with small notch cutouts at their inner corners, giving the jack-o-lantern an intense furious glare. Below them, a wide zigzag mouth with four sharp points runs the full width of the face. All five pieces are large and open, making this a fast, beginner-friendly carve where the lit pumpkin reads as pure aggression. Cut the two eye shapes before the mouth so you can judge the spacing while the lower pumpkin wall is still fully solid.
Arched Brows and Single Tooth
A wholesome grinning face with arched eyebrows, round eyes that keep their pupils as uncut dots, a small triangle nose, and a big open smile showing two square teeth. The brows, eye rings, nose, and mouth are pierced through while the pupils and teeth remain as attached pumpkin. Cut the eyes slowly so each floating pupil keeps a solid connecting bridge to the shell.
Barred Eyes, Fourteen Leaves
Big round eyes split by vertical rind bars sit over a button nose and a huge grin packed with square teeth, while clusters of petal shaped leaves fan out from each cheek. Everything is cut through, and the fourteen petals plus the tooth gaps are why this rates hard. Carve from the center of the face outward so the delicate petal clusters are handled last, when the wall is lightest.
Bee with Three Raw Stripes
A friendly bumblebee spreads four scalloped wings wide, with a round head, curled antennae, and a plump body banded by three raw stripes. This is a shading design with no pierced holes: the wings, head, and body stripes are shaved down to pale flesh while strips of dark skin form the outlines and bands. Shave the big wing panels first, then refine the narrow antennae with a small gouge.
Broad Smile With Round Eyes
Two round eyes sit above a broad crescent smile that sweeps almost the full width of the pumpkin, making the friendliest face on the block. All three shapes are simple cut-throughs with no fragile pieces anywhere. It is a perfect first carve: drill or poke start holes in each eye, saw the circles smooth, then cut the long mouth curve in one relaxed pass, keeping the crescent's pointed corners crisp.
Cartoon Ghost Pumpkin Stencil
A cartoon ghost floats upright in this easy pumpkin stencil, with a swirling curl at the top of its rounded head, two three-fingered hands spread wide at its sides, and an oval body that dissolves into a trailing tail. The interior body region and surrounding cut-away areas are pierced through while the ghost outline and a central oval chest patch remain as solid skin. Because the design is mostly open cuts, the pumpkin glows bright around the solid ghost shape for a classic reverse-silhouette look.
Castle Windows and Arched Door
The pumpkin itself becomes a castle: square battlement windows march across the top, tall rectangular windows flank the sides, and a grand arched doorway glows at the center. Every opening is a straightforward cut-through shape with wide rind walls between them, which is why this rates easy. Keep at least a finger's width of rind between neighboring windows as you cut so the castle wall stays sturdy, and square up corners with short poke cuts.
Cat Face & Eight Whiskers
A sweet cat face rendered entirely in surface shading: pointed ears with inner triangles, wide eyes with crescent pupils, a small nose, a curved smile, and eight long whiskers fanning across the cheeks. Nothing is pierced through, so you shave away just the orange skin and let the pale flesh show the design. At medium difficulty, keep your scraping depth even along the thin whisker lines so they all glow with the same brightness.
Cat With Two-Tooth Smile
A grinning cat jack-o'-lantern with triangle ears at the crown, big round glowing eyes, a small triangle nose, slender whisker slits, and a wide smile showing two square teeth. The main features are pierced through while the pumpkin skin between them forms the cat's face. This is a true easy design with big friendly shapes, so it is a great first carve for kids; just have an adult handle the thin whisker cuts with a fine saw.
Cheerful Snail & Spiral Shell
A grinning cartoon snail with a big spiral shell, a smiling face, and two ball-tipped eye stalks glows warmly from the pumpkin front. The design is shaved rather than pierced, with narrow ridges of skin left in place to define the spiral bands, body curve, and happy face. It earns its hard rating from those thin dividing ridges; shave the spiral from the center outward and keep your blade shallow so the ribs survive.
Classic Snaggletooth Grin
This is the timeless jack-o'-lantern face: two bold triangle eyes, round cheek dots, a circle nose, and a wide grin broken up by chunky snaggleteeth. Every shape is cut all the way through, so the whole face glows brightly at night. Because the openings are large and simple, it is a perfect first carve; just leave the tooth tabs attached to the rim of the mouth as you saw around them.
Crescent and Eight Stars
A large crescent moon curves along one side of the pumpkin while eight stars of varied sizes scatter across the rest of the face. Moon and stars are all cut-through openings, turning the pumpkin into a bright celestial lantern with plenty of glow for a dark porch. Eight stars push this to a medium carve simply on repetition, so rotate the pumpkin as you go and cut every star point with a pull stroke toward the center for clean tips.
Crescent Eyes and Broad Smile
Two upswept crescent eyes squint with joy above an enormous open smile that stretches nearly the full width of the pumpkin, curling up into playful points at each corner. Just three cut-through openings make the whole face, with no nose, teeth, or fragile bits anywhere. This easy design is pure beginner fun; carve the big smile first while the wall is strongest, then the two eye crescents, angling your blade slightly outward so the pieces push free cleanly.
Crescent Eyes and Curved Smile
Pure cheer: two upturned crescent eyes squint with delight above a huge toothless smile that curls up at both corners. All three shapes are pierced through so the whole face beams with candlelight, and the matching curves give it a warm, laughing character. This easy pattern rewards smooth cutting; saw each crescent in one steady motion following the curve, and round off the smile's corners rather than leaving sharp points.
Crescent Wink and Two Teeth
A playful winking face with one big round open eye, one crescent-shaped winking eye, and a broad open smile showing two square teeth. All the features are simple pierced openings with plenty of solid pumpkin between them, so the face is sturdy and beginner friendly. For this easy carve, cut the large smile first while the wall is strongest, then finish with the crescent wink, angling your blade slightly outward for a clean curve.
Curled-Hand Ghost & Round Glow
A wide-eyed little ghost with curled hands and a wavy hem floats in front of a big round glow, its startled O-shaped mouth mid-boo. The circular background is cut through around the ghost, so the figure stays as connected rind while light floods the disc behind it. Those slim connector bridges at the hands and hem are the whole design; cut the large background sections first and save every bridge for careful final passes.
Curved-Neck Dino and Left Tail
A gentle brachiosaurus in full-body silhouette, its long neck curving up to a small head while a thick tail sweeps out behind sturdy rounded legs. The whole dinosaur is cut through as one connected opening, so the friendly giant glows edge to edge. An easy favorite for dino-loving kids; start cutting at the wide belly and work outward so the slender neck is supported until the very end.
Cute Bat Pumpkin Stencil
A chubby cartoon bat with pointed ears, large round hollow eyes, a small open mouth with two fangs, and wide jagged wings spread in a V-shape makes up this friendly easy bat pumpkin stencil. The wings, eyes, and mouth are all pierced through, leaving the round body as a solid center island held by the wing-edge bridges. To keep the central body from drooping inward once the wings are cut, carve each wing in two halves and leave a thin skin tab at the wingtip notches until the very last cut.
Diamond Eyes and Crescent Grin
A cheerful minimalist face made of just three cuts: two big diamond eyes and one long crescent smile sweeping underneath. All three shapes are removed completely, giving a bright, friendly glow with almost no carving time. This easy pattern is perfect for first-timers and kids with supervision; cut each diamond in two triangle halves if the full shape feels awkward, and save the wide smile for last.
Five Glowing Shapes
Five bold glowing shapes scattered across the pumpkin: two stars, a circle, a square, and a triangle, like a preschool lesson turned into a lantern. Every shape is cut fully through with generous spacing, so there are no fragile bridges and each opening throws its own pool of light. As an easy design it is ideal for carving with little kids: let them pick the shape order and poke the transfer dots while an adult handles the actual cutting.
Floppy-Eared Labrador Muzzle
A lovable Labrador face with two glowing floppy ears, round eyes, a rounded triangle nose, and an open smiling muzzle beneath. The big ear panels and the mouth cut fully through, while narrow skin bridges separate the nose from the jowl lines. A medium carve thanks to those bridges; cut the small eye and nose openings before the large ears so the face area keeps its strength while you work.
Four-Arch Rainbow
Four nested rainbow arches glow from the lower half of the pumpkin, each band separated by a strip of untouched shell. The arch openings are cut all the way through while the curved ribs between them stay in place to define the rainbow shape. Start with the smallest inner arch and work outward so the narrow ribs keep their support as long as possible.
Friendly Alien Monster Pumpkin Stencil
A friendly alien monster pumpkin stencil showing a round-bodied creature with three bulging circular eyes, two small antenna balls on stalks, a wide grinning mouth with pointed fangs, and shaggy textured fur patches on its body and feet. One arm is raised in a wave while the other hangs loosely at its side. Carve the three eye circles early, since they are isolated islands that require intact pumpkin wall around them to stay in place.
Friendly Ghost Pumpkin Stencil
A cheerful, cartoonish ghost with a round pudgy body, wide grinning face with crinkled eyes and rosy cheeks, and wavy trailing edges floats center-stage in this ghost pumpkin stencil. The ghost's body is a network of flowing curved solid lines, the outline, the cheek arcs, the eye detail curls, set against cut-through areas that form the glow around the figure. Wispy curl accents appear on both sides. The crinkle details inside the eyes and the small cheek curves are the narrowest solid bridges; cut those first before removing any of the surrounding open areas.
Friendly Jack-o-Lantern Pumpkin Stencil
Two rounded horseshoe-arch eyes, each with a small bump notched from the bottom to suggest eyebrows, and a broad curved mouth split by two square bottom teeth define this easy pumpkin stencil. The asymmetry between the left eye (fuller arch) and the right eye (slightly smaller, offset notch) gives the face a winking or quizzical personality. All cut-outs are generous and smooth, making this a good pumpkin stencil for carvers who want a friendly face without tiny fiddly pieces. Leave the two small inner-eye notches for last so the arch stays rigid while you cut the mouth.
Garden Snail with Spiral Shell
A garden snail glides across the pumpkin with a beautifully ridged spiral shell, textured body, and two slender eye stalks reaching forward. Nothing is cut through; the whole snail is shaved and sculpted from the skin so its pale relief stands against the dark rind. This hard shading design rewards patience with texture: carve the shell's spiral grooves at varying depths and stipple the body with shallow scoops to suggest its bumpy skin.
Ghost with Three Uneven Points
A single billowy ghost with two raised arms and a wavy hem ending in three uneven points, carved as one big glowing cutout. The entire ghost silhouette is pierced through, so candlelight fills the friendly specter from arms to tail. This easy one-piece design suits squat pumpkins with plenty of front surface; cut the smooth outer curves first and finish with the scalloped bottom points, which are the only fiddly bits.
Giant Nose and One Tooth
A big-hearted face dominated by an oversized triangle nose, flanked by two small round eyes, with a wide crescent smile carrying one square tooth. Every feature is cut through, and the giant nose becomes the brightest window on the whole pumpkin once the candle goes in. An easy pattern with generous shapes; cut the huge nose last so the wall keeps its strength while you work.
Golden Retriever Pumpkin Stencil
A golden retriever's face looks straight out from this easy pumpkin stencil: wide floppy ears, a broad forehead, round eyes with small arched brows above them, a large nose, and a happy open mouth with tongue showing are all carved as pierce-throughs. The ears are the largest cut areas and frame the face with an even glow. When the pumpkin is lit, the dog's expression reads as warm and friendly. Carve the small eyebrow arches before removing the large ear sections, since the brows are thin and easy to lose once the nearby wall flexes.
Goofy Pupils and Twelve Dots
A freckle-faced goofball with lifted eyebrow cuts, big eyes crossed by full-width pupil tabs, a round nose, twelve freckle dots, and a huge open grin with mismatched teeth. The openings are cut through while the pupil bars, teeth, and surrounding freckle rind stay intact. It rates hard because those wide pupil tabs span the entire eye: cut each eye as separate top and bottom windows, drill the freckles with a small round bit, and save the eyebrows for last.
Goofy Three-Tooth Grin
A lovable goofy face with two big round eyes, a small triangle nose, and a wide smile broken up by three blocky teeth. Every shape is a full cut-through opening, so the eyes, nose, and mouth glow while the rest of the pumpkin stays untouched. It is a great first stencil; start with the smallest tooth cuts before opening the large mouth so the wall stays sturdy.
Happy Arches and Two Teeth
A joyful jack-o'-lantern with two happy crescent arch eyes, curved like eyes squeezed shut in a laugh, above a wide smile interrupted by two square teeth hanging from the upper lip. The eye arches and mouth are cut through while the two teeth remain as attached blocks of pumpkin wall. An easy, forgiving carve: cut the mouth outline first, then carefully saw around each square tooth so its corners stay crisp.
Happy Crescent-Eyed Grin
A cheerful jack-o'-lantern face with sweeping crescent eyes, a small notched nose, and a wide grin framed by two pointed fangs and blocky lower teeth. Every feature is cut fully through so the whole face glows. The crescent eyes taper to fine points, so use a thin saw and cut toward the tips from both directions to keep the corners crisp.
Happy Vampire Pumpkin Stencil
A cheerful jack-o-lantern face with vampire character fills this beginner-friendly pumpkin stencil: two large arching eye openings each cradle a small solid half-moon pupil, a small heart-shaped nose cutout sits in the center, and a wide grinning mouth shows two prominent pointed fangs flanked by rows of square teeth. Each feature is a distinct pierced-through shape separated by solid pumpkin bridges. Start with the heart-shaped nose and the small pupil islands inside each eye before opening the bigger eye arches, so those internal solid pieces stay anchored while you work.
Heart Cheeks and Eight Dots
An irresistibly cute kawaii face: two tall oval eyes, a tiny curved smile, a heart-shaped blush on each cheek, and eight little sparkle dots scattered around the edges. Every element is a small pierced opening, and the wide spacing across a squat pumpkin gives it that classic sticker-art charm. At medium difficulty the hearts and dots demand patience; use a drill bit or apple corer for the round sparkles to keep them perfectly circular.
I Love Arkansas Pumpkin Stencil
The Arkansas stencil uses the standard "I Love" pumpkin layout: a block I, a full heart, and the two-letter abbreviation AR in rounded type. Both letters are open silhouettes with no interior counters, making this a clean, beginner-friendly carve with four distinct glowing shapes. The R's open leg curves slightly inward, so trace it with a pin tool before cutting to confirm the exact endpoint of that stroke before committing the blade.