The 2026 contest winners are inGrand Prize, People's Choice and Most Creative, all crowned.
@ai_concepts
Sep 25, 2026
Rust-Haired Anxiety PumpkinAI
0

Report this carving

Tell us what is wrong. Reports are private.

Rust-Haired Anxiety Pumpkin

This easy Anxiety pumpkin carving idea opens two circular eyes and a wide mouth with three broad upper teeth remaining joined to the lip, then adds the character's rust-colored hair and collar in paint on intact rind. Cut the mouth opening first since it is the widest shape and sets the scale for the eyes. A warm candle inside lights up the wide grin and makes the painted rust hair glow orange.

No ratings yet · Sign in to rate
EasyFacesFunnyClassic Cutout
anxietyfacemovieinside-outfunnyeasyrust-hairwide-mouth

Save this design for carving night, then share a photo of your own jack-o'-lantern once it's glowing.

Inside Out and all related characters, names, logos, and trademarks are the property of their respective owners. This is an unofficial fan carving shared by our community for inspiration only. PumpkinCarvingIdeas.com is not affiliated with, sponsored by, or endorsed by any rights holder or person depicted, and no such connection is implied.

Comments (0)

  • No comments yet. Be the first.

Our tips for carving a similar design

Two circular eyes and a wide mouth with three broad upper teeth remaining joined to the lip handle all the structural work, while rust hair and a collar painted on the intact rind give the Inside Out 2 character her identity. Cutting the mouth first sets the scale and then guides where the eyes sit above it. The wide opening lets interior light spill out generously for a warm, glowing effect.

From pumpkin to porch

  1. Scoop and prepare

    Cut a bottom entry plug and scoop the pumpkin interior to about 3/4 inch wall thickness. A thinner wall amplifies the glow from the wide mouth opening. Wipe the exterior dry before marking any guidelines.

  2. Mark the cut shapes

    Draw the wide mouth opening first in pencil, marking the positions of the three broad upper teeth as solid sections within the upper edge. Then draw the two circular eyes above the mouth, spaced to look natural. Mark the rust hair outline and collar shape as guides for painting.

  3. Cut the mouth

    Use a detail saw to cut the mouth opening, leaving each of the three upper teeth attached firmly to the lip edge. Keep tooth widths at least 3/4 inch to prevent them from snapping when the pumpkin dries. An adult should handle all sawing.

  4. Cut the circular eyes

    Cut both circular eye openings with smooth continuous strokes. Because the mouth is already open and lit from inside, you can double-check the eye positions relative to the glowing interior before committing to final cuts.

  5. Paint the hair and collar

    Apply rust-colored acrylic to the hair shape at the top and sides of the face with a medium flat brush. Use a fine liner for the collar detail below the face. Keep paint away from the cut edges to avoid drips falling inside the pumpkin.

  6. Light and display

    A warm LED tea light inside makes the rust-painted hair appear to glow orange against the darker rind, complementing the character's anxious energy. Display at eye level so the wide grin is the first thing viewers see.

Written with AI to match this design

Gather your supplies

Check things off as you get ready.

Work on a stable surface, keep your free hand out of the cutting path, and have an adult handle sharp tools.

Three levels of light

  • Leave intact

    The three broad upper teeth, the painted rust hair, and the collar rind all stay solid and dark

  • Peel & shade

    None on this simple design

  • Cut through

    Both circular eyes and the wide mouth opening are cut fully through for full glow

Learn the carving basics

Before you start cutting

How do I keep three teeth evenly spaced across the mouth?

Measure the total mouth width in pencil and divide it into four equal sections: the outer two sections become the left and right teeth positions, and the middle section marks the gap. Pencil lines give you cutting targets for each tooth edge, making even spacing much easier than eyeballing it.

The mouth opening is very wide. Will the pumpkin sag around it over time?

A wide opening is fine as long as the rind above it (including the three teeth) is intact and the wall thickness is at least 3/4 inch. Keeping the pumpkin in a cool location and using an LED rather than a hot candle slows softening of the rind around large openings. Expect two weeks of display life in typical autumn temperatures.

What rust paint color should I buy?

Look for an acrylic labeled burnt sienna, terracotta, or rust orange. A mix of orange and dark brown also works well. The character's hair color is a warm reddish-brown rather than a bright orange, so test the color on paper first and add brown until it looks right before painting the pumpkin.

Your take belongs here, too.

Changed a detail? Made it simpler? Share a photo of your version and tell the community what worked.

Share your pumpkin

Want more designs like this? Browse our full library of pumpkin carving ideas, or pick a free printable stencil. Every pattern and template in our own collection is free to print at home.

More pumpkins like this

You've reached the end · 8 pumpkins
The Patch Report

Fresh pumpkins, in your inbox.

The best new carvings, ideas worth stealing, and how-tos for carving season. Short, seasonal, and gone by November.

A short email during carving season. Unsubscribe anytime. See our privacy policy.