Similar pumpkin stencils
View all stencils βAbout this stencil
This free Steady Sheldon pumpkin stencil is a printable PDF pattern you can print at home, tape to your pumpkin, and trace. A gentle box turtle strolls across the pumpkin, its domed shell divided into raised seams and its legs dotted with rounded scale spots. The whole design is skin-shave work with no pierced holes; you strip the skin inside each shell panel and body section while leaving the seam lines dark and raised. Vary your shaving depth slightly between panels to give the shell dimension, and save the tiny scale dots for last. Use it as a carving template for your Halloween jack-o'-lantern. It is rated Advanced. Estimated time: 2-3 hours. Actual time varies with preparation, pumpkin size and experience. Fine details and narrow supports need careful planning. Follow the cutting and shading key in this designβs PDF.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a continuous-wall shading design: you never cut all the way through the pumpkin. On the printable pattern, light gray regions get just the skin shaved off for a faint glow, dark gray regions are scraped deeper so more light comes through, and white areas keep their skin untouched. The numbers give you the safest working order. Plan on about 2-3 hours from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the wall to about 1 inch behind the design so light can pass through the shaded areas. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer the outlines by poking dots along every line. Work with a loop tool, clay ribbon scraper, or the back of a spoon rather than a saw.
Shading order
- Establish the shell and limbs. Shallow-shave all gray regions. Example 1 sits on the shell rim. Keep the white shell seam network, eye, mouth crease and flipper spots untouched. Preserve the short left tail and three separate flippers.
- Deepen the twelve shell scutes. Scoop all twelve dark-gray scutes and the low belly highlight. Broad examples are marked 2. Follow the domed shell and slanted lower row without crossing the intact white seams.
- Shape the lifted head and legs. Deepen the dark-gray head, neck and three flipper centers, using the head example marked 3. Keep five rear, seven near-front and five far-front white spots intact. Work gradually without making through-holes.
Check your progress often: set a bright LED inside and dim the room lights, and the glow shows exactly where to scrape deeper. Go slowly near thin spots and stop before the wall flexes; a pierced wall cannot be undone.
Tools you'll need
For a advanced carve like this you'll want a fine-detail pumpkin saw, spoon / scoop, pin transfer tool, and small gouge if the pattern includes shading. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
IntermediateSmiling Sea Turtle
A smiling sea turtle paddles across the pumpkin, its patterned shell divided into glowing plates while thin ribbons of skin stay in place to draw the head, flippers, and shell segments. This is a shading-style design carved on a continuous wall, so you shave away the skin rather than piercing holes, letting the whole turtle glow softly. Shave in thin layers and test with a light often until the flippers and shell panels shine evenly.
IntermediateSheldon the Turtle Pumpkin Stencil
A friendly turtle ambling along in profile, its domed shell divided into a mosaic of eleven plates, with a lifted head, dot eye, and stubby legs. This is a shading design: you shave the skin inside each shape so the pale flesh shows, leaving thin dark rind lines between the shell plates. Work plate by plate and keep the dividing ridges at least a knife-width wide.
AdvancedStarry-Eyed Sweetie Pumpkin Stencil
Two huge sparkling anime-style eyes, each split by a vertical skin bar, beam above a tiny smile and heart-shaped cheeks, while dozens of little stars and dots twinkle across the whole pumpkin. The eyes, hearts, stars, and dots are all cut through, leaving the eye bars intact. The sheer number of small piercings makes this a hard carve; drill all the dots first, cut the stars with a fine detail saw, and save the big barred eyes for the very end.
AdvancedBright-Eyed Bear Cub Pumpkin Stencil
A round-eared bear face grins from the pumpkin, with big circular eyes holding attached pupil tabs, a shiny nose, two little teeth, and a crown of twelve teardrop openings fanning above like fur tufts. The eyes, muzzle, teardrops, and ear rings are pierced while pupils and outlines stay connected. Rated hard for the hanging pupil tabs, so leave their bridges thick and cut them dead last.
AdvancedSnowy Chick Pumpkin Stencil
A plump baby penguin stands in profile facing right, with a dark head and back, a softly glowing belly, and tiny webbed feet. The design is shaded rather than pierced: you shave the belly and face patches thin so they shine brightly, leave the flipper and back skin dark, and feather the transition between them. Work the big belly area with broad shallow strokes and save the fine downy texture lines for the very end.
AdvancedPlayful Harbor Seal
A playful harbor seal reclines with its head up, whiskers spread, and tail flippers raised in a happy curl. Everything is done with skin shaving rather than pierced cuts, so the seal's body emerges in pale relief with darker skin left for the eyes, nose, and whisker dots. It rates hard because of the fine facial detail; use a small gouge for the whisker spots and shave the body in smooth, even layers.





