Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
212 results · Page 1 of 6
Alien Pumpkin Stencil
An extraterrestrial figure with an oversized oval head, large almond-shaped eyes, delicate facial features, and a lean torso covered in fine ribbed line-work fills this expert-level pumpkin stencil. The alien holds up one three-fingered hand in a peace sign, and the entire upper head is decorated with small curved slash marks suggesting brain-like texture. Each fine interior line across the torso and head must be cut precisely to retain the many thin bridges that keep the design from collapsing. Cut the small curved head-texture marks first before any large area is removed, as they rely on a full wall for support.
Almond Eyes and Wide Cat Smile
A sly cat face with two swooping almond eyes, a small triangle nose, and an enormous curling grin that stretches nearly ear to ear. The eyes, nose, and mouth are cut fully through, and the thin rind strips inside the smile create the mischievous cat-lip curves. At medium difficulty, the tapering eye points need patience; finish each point with a short pull cut toward the corner.
Anarchy Symbol Pumpkin Stencil
The classic anarchist circle-A symbol is redrawn with jagged, torn-edge strokes: the central A-frame, the horizontal crossbar, and the enclosing circle are all rendered as rough, splintered shapes that evoke spray-paint or ripped stencil. Each element is a separate cut piece, so when lit the glowing fragments of the circle and letter float against the dark pumpkin wall. Cut the short crossbar piece first since it sits between the two legs of the A and will be the most difficult to free once surrounding cuts are made.
Badass Pumpkin Stencil
A single-word pumpkin stencil spelling BADASS in wide, chunky block capital letters that span the full face width, with stencil bridge cuts breaking the enclosed counters of the A and the two S letters. All letter interiors are carved through to glow as one continuous horizontal band of text. The double S at the end contains tight letter spacing, carve those two characters last, when the surrounding wall is still fully supported, and use a thin blade to maintain the narrow gap between them.
Barred Eyes and Diamond Dots
A wildly ornate astonished face: two huge round eyes split by vertical bars, a tall oval mouth gaping in shock, and a halo of diamonds, dots, and curved flourishes radiating in every direction. All of it is cut through, from the barred eyes to the smallest accent dot, so the whole pumpkin erupts in patterned light. Rated hard for its piece count, work from the center outward and leave the outer diamonds and dots for the final pass.
Baseball & Crossed Bats
A big baseball with curved stitch seams sits front and center over two crossed bats, carved as a raised emblem in the pumpkin's surface. Nothing is pierced; instead you shave away the skin around the ball and bats so the design stands out in relief, with the stitching etched as shallow grooves. This hard shading design rewards patience: use a loop tool to clear the background evenly and keep your etch depth consistent so daylight viewing looks clean.
Baseball and Crossed Bats
A trophy-worthy relief of a baseball resting over two crossed bats, all standing out from a recessed panel in true sculpted depth. The ball's curved stitch lines and the bats' grain and knobs are incised details, and nothing pierces the wall. Excavate the background panel to an even depth before rounding the ball, and undercut the bat edges slightly so they cast real shadows in daylight.
Baseball Over Crossed Bats
A baseball with curved stitch seams sits front and center over two crossed bats, a classic team-spirit emblem sized for a porch pumpkin. The ball, bats, and stitching are all shaved into the skin rather than pierced, so the emblem glows softly while the pumpkin wall stays whole. On this medium shading piece, shave the bats and ball to one even depth, then cut the stitch lines noticeably deeper so they show as dark laces against the bright ball.
Beach Umbrella and Sun
A scalloped beach umbrella on a straight pole stands above a short shoreline bar, with a round sun cut high to one side. The umbrella canopy, pole, ground line, and sun are each fully cut out, and the scalloped edge leaves a playful fringe of skin between canopy sections. A medium carver's best move is to cut the small scallop notches before removing the big canopy piece, while the wall still has plenty of support.
Bearded Man Portrait Pumpkin Stencil
A bearded man shown from chest up is rendered in this expert pumpkin stencil with fine portrait linework: tousled spiked hair, narrow cut-out lines for expressive eyes with visible irises, a trimmed goatee built from small isolated patches, an open jacket collar, and a table or surface line at the bottom. The face relies on dozens of thin pumpkin bridges to hold the portrait together, creating a detailed likeness when lit. Carve the small goatee patches and eye details first, before the larger jacket and background cuts are made, to keep the face area stable throughout.
Bigfoot Pumpkin Stencil
A full-body Bigfoot figure strides confidently to the right on this hard-difficulty pumpkin stencil, rendered in a chunky outline style with shaggy fur edges, a broad face with heavy brow ridges and small eyes, swinging arms, and large flat feet. The body outline and fur texture gaps are all pierced, while a central vertical strip of skin connects the figure's torso to the pumpkin background on each side. Preserve the narrow fur-edge bridges along the arms by cutting inward from the outer contour rather than slicing along the bridge line itself.
Black Lives Matter Pumpkin Stencil
A statement text pumpkin stencil spelling BLACK LIVES MATTER in three stacked rows of wide block stencil letters with narrow bridges preserving enclosed letter counters. All letter interiors are carved through to glow, and the thick letterforms stay solid. Because the bottom row MATTER spans nearly the full face width and includes tight letter spacing, carve that row last so the pumpkin wall retains maximum support while you cut the taller upper letters.
Bridged Peace Sign
A bold peace symbol fills the face of the pumpkin, its glowing ring and spokes formed by cutting away the four wedge-shaped spaces between them. Thin uncut bridges hold the outer ring to the pumpkin wall, which is exactly what makes this a medium carve. Cut each wedge slowly and leave the connecting bridges at least a finger-width wide; if a spoke feels wobbly, shave it thinner from the inside rather than recutting the front.
Broad Crescent & Star
A bold crescent moon paired with a five-point star, rendered as a clean night-sky emblem. Nothing is pierced; you shave away the skin inside the moon and star shapes so they glow softly against the untouched rind. As an easy shading design, just score the outlines first, then peel shallow, even layers with a loop tool until both shapes brighten uniformly.
Broad Five-Point Star
One broad five-point star fills the front of the pumpkin as a single dramatic cutout. The entire star is pierced through, leaving a clean rim of pumpkin around it, so a candle inside turns the whole shape into a lantern window. As an easy design it is ideal for beginners; draw a guide dot at each of the five points before cutting, then connect them with straight strokes so the star stays symmetrical.
Broad Star and Two Ovals
One broad five-point star dominates the center of the pumpkin, flanked by a single round opening on each side. All three shapes are cut fully through, so the star throws bright, even light while the two dots add a playful balance. It is a quick, satisfying carve for beginners; saw each point of the star from the outer tip inward toward the center so the corners meet cleanly without overcuts.
Buffalo Hump & Curved Horn
A standing buffalo silhouette with its heavy shoulder hump, curved horn, shaggy chin, and tufted tail all captured in one clean shape. You peel the skin away inside the outline so the bison appears as a smooth pale panel, with the wall left fully intact behind it. This medium shading design looks great even unlit; trace the leg gaps carefully since those thin strips of remaining skin define the whole stance.
California State Shape
The unmistakable outline of California cut fully through the pumpkin wall, glowing as one tall golden silhouette. The entire state shape is removed while the surrounding rind stays intact to frame it. The long straight eastern border and the jagged coastline meet at narrow angles, so take the coast in short, connected strokes rather than one continuous pull to avoid cracking the point at the southern tip.
Carbon Element Pumpkin Stencil
A periodic-table tile for carbon (element 6) fills the stencil: a rounded-corner square border frames a large bold letter C with an interior negative crescent carved away, the atomic number 6 in superscript at the upper right, and the word "carbon" in lower-case across the bottom. The border, the C glyph, the numeral, and the text letters are all pierced through. Lit from within, the design reads as a glowing science reference card. Leave the thin horizontal shelf of pumpkin skin between the C body and the "carbon" text block intact until all the letter-O counters in "carbon" are punched out.
Cartoon Dragon Pumpkin Stencil
A cartoon-style dragon stands upright with a crested head, open toothy grin, round eye, segmented belly, and a curling tail, all rendered in a chunky outline style on this pumpkin stencil. The body outline, crest spines, and scattered limb shapes are pierced through, while narrow bridges at the belly segments and tail curl remain solid to hold the design together. Cut the largest body cavity first, then the outer wing and limb fragments; save the tiny belly-rib slits for last so the structure stays rigid while you finish the surrounding cuts.
Cloudy Moon Campsite
A cozy campsite spreads across the pumpkin: a striped A-frame tent between pine trees, a crackling campfire, and a full moon drifting behind wispy clouds. The scene is shaved into the skin rather than pierced, so light glows softly through the thinned areas at different strengths. For this hard shading job, carve the brightest spots like the fire and moon deepest, and keep the trees and clouds shallower to build a layered nighttime look.
Compass Star & Moon Phases
An eight-pointed compass star anchors the center while a ring of moon phases and beaded dots circles around it, from thin crescents to a full glowing disc. The star's facets and the ring are shaved at varying depths into the skin, with only the deepest moon discs approaching full brightness, giving the design a layered lantern glow. Map your depths first: shallow for the star facets, deeper for each moon as it waxes.
Connecticut State Shape
Connecticut glows as a single bold cutout, its mostly straight northern and western borders framing the wavy Long Island Sound coastline along the bottom, with the little southwestern panhandle jutting toward the corner. The whole state shape is removed so light fills the silhouette edge to edge. An easy carve overall; start with the straight border lines, then follow the gentle coastal bumps freehand without worrying about perfection.
Cool Dude Sunglasses Pumpkin Stencil
A cartoon face with swept-back windswept hair, heavy brow, and large wraparound sunglasses fills this hard halloween pumpkin stencil, the lenses, hair wisps, and facial contours all rendered as separate cut sections connected by thin skin bridges. Lit from inside, the open sunglasses lenses glow brightly while the raised brow and cheek lines stay solid, giving the face a streetwise, sunlit look in reverse. The thin strands of hair near the temple are the most fragile bridges, so cut them after all the larger facial sections are removed.
Cowboy Skull Pumpkin Stencil
A grinning cowboy-hat skull faces three-quarters toward the viewer, its wide-brimmed hat battered and torn along the crown. Hollow eye sockets and an open jaw with individually delineated upper and lower teeth are pierced through, while the hat brim, cheekbones, and nose cavity form a complex arrangement of solid bridges. Flame wisps curl at the chin. When lit, the teeth row and eye sockets glow against the dark skull mass, creating a hard-boiled undead outlaw look. Cut each tooth gap individually rather than sweeping through the whole row to keep the ridges crisp.
Crescent and Seven Teardrops
A tall crescent moon anchors the left side of this celestial design while a fan of seven teardrop rays arcs around its open curve like scattered moonbeams. Every shape is pierced through, so the crescent throws a big wash of light and the teardrops sparkle around it. Cut the crescent first for this medium design, then do the teardrops smallest to largest; angling your saw slightly outward makes each little petal pop out cleanly.
Crescent and Six Falling Dots
A slender crescent moon hangs in the upper corner while a diagonal trail of small round dots falls away beneath it, like fading moonlight. Each shape is pierced through, and the tiny dots do most of the sparkle work against the dark shell. For this easy pattern, punch the dots with an apple corer or drill bit for perfect circles, then saw the thin crescent in two smooth passes.
Crescent Moon and Star Pumpkin Stencil
A large crescent moon curves across most of the design while a single five-pointed star sits nestled in the open interior of the crescent in this easy space pumpkin stencil, both shapes carved as open silhouettes. The crescent is a large single cut, and the small star inside it is a separate isolated piece that must be removed independently. Cut the star's five points with precise plunge cuts at each tip before slicing the connecting straight sides, then remove the star before carving the surrounding crescent so your hand has room to maneuver.
Crescent Moon Pumpkin Stencil
A crescent moon shape faces left, its body filled with a texture of small irregular cut-out marks that suggest the pitted surface of the moon, while a faint face profile is visible along the inner curve of the crescent. The large crescent itself is the main pierced shape, and the small interior texture dots pepper the body, creating a glowing stippled effect when lit from inside. To keep the many small interior marks from causing the crescent body to crumble, carve the outer crescent boundary first, then pick out the texture dots from largest to smallest using a small round drill bit or detail blade.
Crescent over Conifer Hills
A crescent moon hangs over rolling hills dotted with pine trees, while dozens of stars and pinprick lights scatter across the sky above the treeline. The entire scene is shaved at varying depths into the pumpkin wall, with the moon and hilltops thinned the most so they glow brightest, and the trees left as dark raised skin. Rough in the hills first, then refine tree silhouettes, and finish with the star pricks last.
Crescent Sun and Three Dots
A slim crescent moon faces a round sun ringed by teardrop-shaped ray openings, with a trail of three dots descending below the sun. Every element is pierced through, and the varied hole sizes give the lit pumpkin a layered celestial sparkle. Drill or poke the three small dots first while the wall is still rigid, then cut the teardrops, and save the big crescent and sun circle for last.
Crossed Hockey Sticks and Puck
Two hockey sticks cross in a big X with taped blades angled outward and a puck resting between them at the bottom. This shaded design is carved on a continuous wall, shaving the sticks and puck out of the skin so they glow without any pierced holes, and the blade tape lines stay as raised strips. Keep your shave depth even along both shafts so the long straight lines light uniformly from top to bottom.
Crossed Sticks and Three Dots
Two hockey sticks cross in a bold X with their curved blades flaring outward at the bottom, a round puck resting between them, and three small dots arcing above like arena lights. The sticks, puck, and dots are all pierced through, leaving a crisp diamond of pumpkin at the center of the X. At medium difficulty that center diamond is the fragile piece, so cut the four stick channels one at a time and never lever the knife against it.
Crossed Sticks at Forest Rink
Two crossed hockey sticks with taped blades dominate a full outdoor rink scene, complete with a puck at center ice, board fencing, evergreen trees, and distant peaks behind. It is carved entirely by shading: skin is shaved to different depths so the sticks, boards, and treeline glow in layered tones with no pierced holes. Map out three depth levels before you start and shave the brightest areas thinnest, checking often with a light inside.
Cruise Ship Pumpkin Stencil
A large cruise ship viewed from a slight bow-angle fills this hard pumpkin stencil. Four tall rectangular smokestacks rise from the upper deck, the bridge superstructure runs along the top, and five circular portholes line the hull below the waterline. The design reads as a series of rectangular and circular cutouts separated by solid pumpkin strips. When lit, the port holes and superstructure windows glow individually like a ship at sea. Carve the five round portholes first since circular cuts benefit most from a fresh blade, then work upward through the rectangular deck openings.
Cup, Three Dice and a Pawn
A game-night still life in deep relief: a tipped-over cup spills three pip-dotted dice across a carved tabletop while a rounded pawn stands nearby on its base. Everything is continuous-wall sculpting with no pierced holes, using multiple shaved depths to make the cup, dice faces, and pawn read as three-dimensional objects. As an expert relief carve, block in the deepest background plane first, then step each object forward in layers, cutting the tiny pips last with a round gouge.