Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
71 results · Page 2 of 2
Round Pupils and Twelve Drops
A round-eared bear face grins from the pumpkin, with big circular eyes holding attached pupil tabs, a shiny nose, two little teeth, and a crown of twelve teardrop openings fanning above like fur tufts. The eyes, muzzle, teardrops, and ear rings are pierced while pupils and outlines stay connected. Rated hard for the hanging pupil tabs, so leave their bridges thick and cut them dead last.
Round-Eyed Kitten and Whiskers
A sweet kitten face with big round glowing eyes, a tiny triangle nose, a bow-shaped smile, perky ears, and fine whisker slits fanning from each cheek. Every feature is a simple pierced cutout sized for small hands to trace and grown-ups to saw. Cut the narrow whisker slits first with a detail blade while the wall is stiff, then open the larger eyes and mouth.
Seal Outline & Whiskers
A playful seal rendered in flowing line art, propped up on its front flippers with whiskers, a bright eye, and body contours traced in glowing strokes. Nothing is cut through; you shave the skin along each outline so the lines light up like neon while the wall stays solid. Since medium-difficulty shading rewards steady hands, score the outlines with a knife tip first, then widen them evenly with a small gouge.
Seated Capybara with Smile
The internet's favorite chill rodent sits in calm profile, its whole rounded body glowing warmly with a small dark eye and nostril left as untouched spots of skin. Rather than piercing the wall, you shave the capybara's full silhouette down to the inner flesh so it lights up as one soft shape. For this medium shading carve, peel the big body areas with a flat scraper, thin them evenly, and leave the eye and nose dots strictly alone.
Seated Dog with Bone and Dots
A patient pup sits in profile, ears perked and tail resting, while a bone floats nearby with a trail of small dream-bubble dots connecting them. The dog's body, the bone, and the dots are all cut fully through as bold, separate openings, so the scene reads instantly from the street. This easy design has no fragile interior bridges; just cut the large dog body in two or three sections and pop the bone and dots out last for a tidy finish.
Seated Puppy with Two Hearts
A floppy-eared puppy sits in profile, tail up, while two hearts float above its nose like puppy love made visible. The dog silhouette and both hearts are cut fully through, so the whole scene glows in warm friendly light with the pumpkin rind forming the night around it. This easy pattern is great for kids with supervision; carve the two small hearts first for practice, then tackle the big puppy shape in comfortable sections.
Seated Rabbit with Split Ears
A seated rabbit in profile with two tall split ears, a rounded back, and tucked front paws, cut through as a nearly single silhouette with slim gaps defining the ears and feet. The shell around the bunny stays whole so the glowing shape reads crisply from a distance. Carve the narrow gap between the ears first; it is the finest cut on an otherwise smooth outline.
Seven Hearts in a Tall Zigzag
Seven hearts zigzag down the front in an alternating left-right column, with small round dots sprinkled between them for sparkle. Each heart and dot cuts fully through, and the vertical layout is made for tall, skinny pumpkins and gourds. A medium carve mostly for the layout; tape the stencil straight down the tallest face before transferring, and carve from the top heart downward so shavings fall clear of finished cuts.
Side-View Penguin
A plump penguin stands in profile with its beak raised, and the design is built entirely from skin shading rather than pierced cuts. You shave away the rind across the penguin's white belly and face for a bright glow, leave the darker back and flipper as untouched skin, and etch a fine outline around the whole bird. For this medium etch, remove the belly in shallow, even layers and stop as soon as light glows through at test lighting.
Six Hearts and Tiny Top Heart
Six hearts arranged in a ring point inward toward the center, with a tiny seventh heart crowning the top and small round dots filling the gaps between them like beads on a wreath. Every heart and dot is cut fully through, creating a lantern that throws a circle of glowing hearts across the porch. For this medium carve, poke a starter hole in each heart and cut the notch last; the dots are quick work with an apple corer or drill bit.
Sleeping Moon, Stars & Cloud
A sleepy crescent moon with a gentle closed-eye face drifts above a puffy cloud, with two twinkling stars floating at its side. Most of the design is shaded by shaving the skin so the moon and cloud glow softly, while the stars can be etched to match. Keep your shave shallow on the facial features, going just deep enough on the eyelid and lips that they read as darker lines.
Sleepy Eyes and Eight Lashes
Two closed crescent eyes with four little lashes apiece rest above a small oval mouth, while round dots on each side form rosy cheeks for a sweetly sleeping face. Every crescent, lash, dot, and the mouth is pierced through, so the tiny lash cuts do the expressive work. Cut the two big crescents first, then add the short lash strokes with a fine saw, keeping each one clear of its neighbor.
Sloth Pumpkin Stencil
A sloth clings with its long clawed arm across the center of this easy pumpkin stencil, its round face showing closed or half-shut eyes and a compact round nose, with a shaggy fur outline around the head and a rounded body below. The large body and arm openings are cut through while the face detail pieces stay solid, so the lit pumpkin shows the sloth's relaxed expression clearly outlined in orange. Cut the small eye-detail pieces before opening the large arm void so those delicate shapes have full surrounding support.
Small-Eyed Dog and Short Smile
A sweet puppy face fills the pumpkin: two long floppy ears drooping down the sides, small round eyes, a rounded nose, and a short curved smile beneath it. The ears, eyes, nose, and mouth are all cut through, so the whole dog glows warmly after dark. Rated medium mainly for the large ear openings; leave a generous strip of wall between each ear and the eyes so the face stays sturdy.
Smiling Narwhal & Two Fins
A smiling narwhal glides across the pumpkin with a long spiral tusk, two side fins, and a happy upturned mouth. The whole body is skin-shave work with no pierced holes, so the pale shaved shape stands out against the dark rind by day and glows gently with a light inside. On this medium shading design, etch the thin tusk and smile lines first with a fine V-tool, then clear the wide body area so you never drag a big tool across your detail lines.
Smiling Sea Turtle
A smiling sea turtle paddles across the pumpkin, its patterned shell divided into glowing plates while thin ribbons of skin stay in place to draw the head, flippers, and shell segments. This is a shading-style design carved on a continuous wall, so you shave away the skin rather than piercing holes, letting the whole turtle glow softly. Shave in thin layers and test with a light often until the flippers and shell panels shine evenly.
Spouting Whale & Three Drops
A chubby, smiling whale with a curled tail sprays three playful droplets from its spout in this sweet ocean design. Nothing is pierced through; instead you shave away the orange skin inside the whale and droplets so they glow as soft golden shapes against the untouched pumpkin around them. That continuous-wall approach makes it very kid-friendly; scrape shallow, even layers with a loop tool until light shows through evenly across the whale's body.
Star Border and Heart Cheeks
A sweet kawaii face with big lashed eyes, heart cheeks, and a tiny smile sits inside a lavish border of stars, hearts, teardrops, and dots that rings the whole pumpkin front. Every one of those dozens of little shapes is pierced through, which is what earns the expert rating despite the friendly look. Carve the face first while the wall is strongest, then work the border outward in sections, resting between rounds.
Teddy Bear Pumpkin Stencil
A seated teddy bear with tattered, drip-edged fur fills this hard-level pumpkin stencil: a round head with small round ears, two circular cheek spots, a nose-and-muzzle cutout, and a tummy split into two glowing panels flanked by small round paws. The ragged fur silhouette along the top of the head and across the body creates dozens of short, jagged points that must stay connected. Work from the center facial features outward, and avoid pressing too hard on the bear's narrow fur-tip points so they do not snap before the larger belly sections are removed.
Three Rainbow Arches
Three nested arches stack like a glowing rainbow, each band cut fully through so the pumpkin lights up in bright concentric ribbons. The strips of pumpkin left between the arches form the rainbow's dark bands and keep the wall sturdy. It is an easy design with big visual payoff; cut the smallest inner arch first and work outward, and keep the leftover ribs at least half an inch wide so they stay strong.
Three Rainbow Arcs and Clouds
Three nested rainbow arcs stretch across the pumpkin, each end tucking into a puffy little cloud at the bottom corners. The arcs and clouds all cut through the wall, and the thin ribs of skin left between the arcs are what give the rainbow its striped look. Cut the innermost arc first and work outward, supporting each rib with your free hand so those curved strips do not snap.
Three Rainbow Arcs and Sun
Three nested rainbow arcs curve over a low half circle sun, filling the bottom of the pumpkin with stacked bands of light. Each arc is cut through while narrow ribs of rind stay between the bands, which is what creates the layered glow. Keep those ribs at least half an inch wide as you carve this medium design, since they carry all the structure.
Three Spotted Mushrooms
Three spotted toadstools rise from a tuft of grass, one tall cap flanked by two smaller mushrooms. This is a shading pattern: you shave away the skin around the stems and caps so they glow softly, while the round spots are scraped a touch deeper for contrast. Nothing is pierced through, which keeps the pumpkin sturdy. Work in shallow layers and stop when light just starts to show through the wall.
Three Stars and Small Crescent
Three plump five-pointed stars scatter across the upper face of the pumpkin while a small crescent moon tucks into the lower corner, capturing a dreamy bedtime sky. Every shape cuts cleanly through the wall, and the generous star sizes keep the sawing forgiving. Cut the crescent's inner curve before its outer curve so the thin horn tips at each end release without cracking.
Triangle Crown Face
A tiny wide-eyed face with a sweet smile sits low on the pumpkin beneath a crown of triangles and diamond sparkles arching overhead. All the shapes are pierced through, from the big round eyes down to the small candy corn style points. The hard part is spacing; transfer the pattern carefully and carve the little crown pieces with a detail saw so each point stays sharp.
Turtle & Eleven Shell Plates
A friendly turtle ambling along in profile, its domed shell divided into a mosaic of eleven plates, with a lifted head, dot eye, and stubby legs. This is a shading design: you shave the skin inside each shape so the pale flesh shows, leaving thin dark rind lines between the shell plates. Work plate by plate and keep the dividing ridges at least a knife-width wide.
Turtle with Raised Shell Seams
A gentle box turtle strolls across the pumpkin, its domed shell divided into raised seams and its legs dotted with rounded scale spots. The whole design is skin-shave work with no pierced holes; you strip the skin inside each shell panel and body section while leaving the seam lines dark and raised. Vary your shaving depth slightly between panels to give the shell dimension, and save the tiny scale dots for last.
Unequal Heart Eyes and Smile
Inspired by the heart-eyes emoji, this lovable face pairs two big heart-shaped eyes with a broad crescent smile. All three openings are cut fully through, so the hearts beam bright pink-orange light after dark. The gentle notch at the top of each heart is the only fiddly spot in this easy carve; poke a starter hole in the middle of each heart and saw up into the notch from inside so the point stays sharp.
Unicorn with Four Mane Points
A graceful unicorn head in profile, complete with a spiral horn, an alert ear, and a flowing mane that ends in four swooping points down the neck. The whole silhouette is cut through as one large opening, so the entire unicorn glows against the dark pumpkin. It is an easy carve despite its size; remove the big piece in two or three sections instead of forcing it out whole.
Upright Ears, Heart and Dots
A French bulldog's unmistakable head, with its big upright bat ears and round cheeks, glows as one large cut-through opening, crowned by three small dots above and a little heart floating below the chin. The design is mostly one generous shape, so it carves quickly and forgives wobbly saw lines. Cut the heart and dots first as warmups, then saw the head outline slowly around those tall ear points.
Upright-Eared Bulldog Face
An adorable French bulldog face with the breed's signature upright bat ears glowing at the top, round eyes, a button nose, and a tidy mustache-like muzzle with a small mouth below. The ears, eyes, nose, and muzzle are pierced openings while the skin between them shapes the flat Frenchie face. At medium difficulty the big ear panels are easy, but take care around the narrow gap between the nose and mouth so the bridge stays intact.
Upturned Seal Pup
A seal pup arches upward with its nose in the air, whiskers fanned, and tail flippers curled at the base of the design. It is carved entirely in continuous-wall shading, with the body shaved smooth and details like the eye, whiskers, and flipper creases etched as darker lines left in relief. Rated hard because of those layered depths, so establish the full body at one shallow depth first, then return with a smaller gouge to deepen the belly and neck curves gradually.
Waving Ghost with Four Lobes
A friendly little ghost lifts one stubby arm in a wave, its four-lobed hem trailing below round eyes and a happy open mouth. The whole figure is shaved shading: you remove skin inside the body so it glows softly, then leave the eyes and mouth as raised uncarved pumpkin. Even, shallow shaving is all it takes, which makes this a forgiving introduction to etching.
Wide Paw with Four Oval Toes
A big friendly paw print with a broad rounded pad below four plump oval toes arranged in a gentle arc. All five shapes are cut fully through, turning the pumpkin into a glowing tribute to your favorite four-legged friend. This is one of the easiest patterns to carve well; cut each oval toe first while the wall is strongest, then remove the large pad in two halves for clean edges.
Woolly Alpaca & Long Neck
A woolly alpaca stands in profile with its long neck raised, its whole fluffy body rendered as one shaved shape with a sweet stippled face. This is a continuous-wall design: peel away just the skin inside the alpaca outline so the pale flesh reads as its fleecy coat, with no pierced holes. Use a small loop tool for the tight fur texture around the head, and work in thin layers so you never break through.