Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
291 results · Page 2 of 9
Confused Jack-o-Lantern Pumpkin Stencil
A crooked, puzzled face expression built from two unequal eyes and a wide zigzag mouth forms this easy pumpkin stencil. The left eye is a narrow horizontal slit while the right eye is a large irregular quadrilateral, and both sit below a single small tapered eyebrow. The mouth is a long jagged zigzag cut with peaks and valleys of different heights, giving the whole face a bewildered, off-kilter look. When lit, the mismatched eyes and frantic zigzag line are immediately readable across the yard. Cut the zigzag mouth with short, angled plunge cuts at each peak rather than one long sweeping stroke to keep each point crisp.
Corgi Pumpkin Stencil
A fluffy corgi puppy sits front-facing on this dog pumpkin stencil, its large upright ears, round eyes with pupils, small round nose, and thick fur ruff all rendered in fine irregular cut lines that break the coat into tufts of light and shadow. The design has many small to medium cut sections across the face and body connected by thin fur-texture bridges. When lit, the corgi face glows warmly with every fur gap illuminated. Cut the small facial features first: the pupil circles inside the eyes, the nose, and the mouth line, before tackling the broader chest and body sections.
Crescent and Eight Stars
A large crescent moon curves along one side of the pumpkin while eight stars of varied sizes scatter across the rest of the face. Moon and stars are all cut-through openings, turning the pumpkin into a bright celestial lantern with plenty of glow for a dark porch. Eight stars push this to a medium carve simply on repetition, so rotate the pumpkin as you go and cut every star point with a pull stroke toward the center for clean tips.
Crescent and Four Stars
A thick crescent moon anchors the left side of the pumpkin while four five-pointed stars drift across the remaining space. All five elements are clean cut-through openings, so the pumpkin becomes a night-sky lantern with the untouched rind acting as the dark sky between them. It is an easy carve overall; the only care point is the star tips, so cut each star point-to-center in single strokes rather than trying to steer around the whole outline at once.
Crescent Moon & Small Bat
A small bat with scalloped wings glides across a big crescent moon in a classic Halloween night scene. Both shapes are shaved rather than pierced: the moon is peeled into a bright smooth crescent, the bat's wings are etched at a lighter depth, and its body stays as raised rind. A hard shading pattern that rewards patience; keep the moon's inner curve clean since that long sweep frames the entire design.
Crescent Moon and Star Pumpkin Stencil
A large crescent moon curves across most of the design while a single five-pointed star sits nestled in the open interior of the crescent in this easy space pumpkin stencil, both shapes carved as open silhouettes. The crescent is a large single cut, and the small star inside it is a separate isolated piece that must be removed independently. Cut the star's five points with precise plunge cuts at each tip before slicing the connecting straight sides, then remove the star before carving the surrounding crescent so your hand has room to maneuver.
Crescent over Conifer Hills
A crescent moon hangs over rolling hills dotted with pine trees, while dozens of stars and pinprick lights scatter across the sky above the treeline. The entire scene is shaved at varying depths into the pumpkin wall, with the moon and hilltops thinned the most so they glow brightest, and the trees left as dark raised skin. Rough in the hills first, then refine tree silhouettes, and finish with the star pricks last.
Crescent Seven Stars Six Dots
A large crescent moon glows at the left while seven chunky five-point stars and six round dots scatter across the rest of the pumpkin like a full night sky. Every moon, star, and dot is pierced through, so the whole surface twinkles when lit. Space your cuts out as you go, alternating sides of the pumpkin, so the wall keeps its strength until the final star is freed.
Cross in an Oval Ray Field
An ornate flared cross stands at the center of an oval field of sunburst rays that radiate outward to the design's edge. It is carved entirely in continuous-wall relief: the cross is left raised with beveled edges while the rays are shaved to alternating depths so light plays across the whole medallion. This hard shading piece rewards patience, so establish the cross outline deep and clean first, then carve every ray from the cross outward to keep the bevels crisp.
Cross Pumpkin Stencil
A large rugged cross pumpkin stencil with slightly tapered arms and a weathered, hand-drawn outline that gives it an organic, aged character rather than a rigid geometric look. The entire cross shape cuts through as a single opening, and because the arms are wide, the resulting jack-o-lantern casts a bold cross-shaped beam of light. A cross this size removes a substantial amount of shell, so thin the interior pumpkin wall to about half an inch before carving to reduce the risk of the outer edges cracking under the weight of the cut.
Cross With Ten Rays
A bold cross anchors the center of the design while ten tapered rays burst outward around it like beams of light. The cross and every ray are pierced through, leaving dark shell between them that frames the radiating pattern. Cut the large cross first to relieve pressure on the wall, then work each ray from its wide outer end toward the narrow tip so the points finish clean.
Crossed Eyes and Buck Teeth
Huge crossed googly eyes sit under raised brow slots while a gaping oval mouth shows off two goofy buck teeth, with freckle dots on each cheek. The eyes, brows, mouth, and dots are all pierced through, and the dark pupils and teeth are rind left attached inside the openings. Those attached pupils and teeth are the tricky bit; cut around them slowly and leave their connecting bridges generously wide.
Crossed Hockey Sticks and Puck
Two hockey sticks cross in a big X with taped blades angled outward and a puck resting between them at the bottom. This shaded design is carved on a continuous wall, shaving the sticks and puck out of the skin so they glow without any pierced holes, and the blade tape lines stay as raised strips. Keep your shave depth even along both shafts so the long straight lines light uniformly from top to bottom.
Crossed Hockey Sticks Pumpkin Stencil
Two crossed hockey sticks dominate this jack-o-lantern stencil, their long shafts forming an X at center with the curved blade ends fanning out left and right; a small round puck sits below the crossing point. The stick shafts are cut as long thin negative spaces flanking the solid X-shaped pumpkin skin bridge, and each blade features short hatching cuts that add texture on the lit pumpkin. Leave the central skin bridge where the two shafts cross untouched last so the structure stays rigid while you complete the outer blade details.
Crossed Sticks and Three Dots
Two hockey sticks cross in a bold X with their curved blades flaring outward at the bottom, a round puck resting between them, and three small dots arcing above like arena lights. The sticks, puck, and dots are all pierced through, leaving a crisp diamond of pumpkin at the center of the X. At medium difficulty that center diamond is the fragile piece, so cut the four stick channels one at a time and never lever the knife against it.
Crossed Sticks at Forest Rink
Two crossed hockey sticks with taped blades dominate a full outdoor rink scene, complete with a puck at center ice, board fencing, evergreen trees, and distant peaks behind. It is carved entirely by shading: skin is shaved to different depths so the sticks, boards, and treeline glow in layered tones with no pierced holes. Map out three depth levels before you start and shave the brightest areas thinnest, checking often with a light inside.
Crouching Devil with Trident Pumpkin Stencil
A stocky cartoon devil crouches in a lunging pose, holding a trident horizontally across his body while lightning bolts crackle at his feet. Horns, pointed ears, and a wide-toothed grin are all rendered in open cutouts, and the overall figure is surrounded by enough white space to read crisply as a lit jack-o-lantern. The three prongs of the trident sit very close together, so cut the two narrow gaps between them with a thin detail blade before removing the larger body sections to keep the surrounding pumpkin from flexing.
Cup, Three Dice and a Pawn
A game-night still life in deep relief: a tipped-over cup spills three pip-dotted dice across a carved tabletop while a rounded pawn stands nearby on its base. Everything is continuous-wall sculpting with no pierced holes, using multiple shaved depths to make the cup, dice faces, and pawn read as three-dimensional objects. As an expert relief carve, block in the deepest background plane first, then step each object forward in layers, cutting the tiny pips last with a round gouge.
Curved Ball and Two Stars
A giant tennis ball dominates the pumpkin, its two big panels pierced through and separated by the signature curved seam left as an attached band of shell, with a small star cut on either side. The sweeping seam is the make-or-break piece, so cut both panel edges toward the seam rather than across it and keep the band at least a finger wide for strength.
Dancing Skeleton Dia de Muertos Pumpkin Stencil
A skeletal Dia de los Muertos figure wearing a flower-crowned hat dances atop a row of pointed picket-fence stakes in this expert sugar-skull pumpkin stencil, with crossbones at its sides, a lacy ruffled collar, and small flower rosettes scattered at the fence tops. Dozens of small isolated cut pieces, including the fence picket slots, collar ruffles, and flower details, create a composition that must be carved in strict order to avoid structural collapse. Start with the fence picket slots at the bottom of the design and work upward, finishing the skeleton body details last.
Dark-Backed Crawling Spider
A big crawling spider with a dark rounded abdomen and eight bent legs radiating across the pumpkin's face. The design is peel-carved: pale skin is shaved away around each leg and along the body's edges so the spider reads in silhouette, with no pierced openings at all. The legs are long and thin, so score both edges of each one with a knife tip before shaving between the lines to keep the curves clean.
Deer Skull and Rifles Pumpkin Stencil
Two crossed hunting rifles sit below a buck's-head silhouette with a full multi-point rack of antlers, forming a classic skull-and-crossbones arrangement in a hunting theme. All three elements are cut out as open silhouettes, so the rifles and antlers glow as bright orange shapes against the dark pumpkin. The junction where the rifle stocks cross is a narrow pinch point; trace that intersection carefully and cut each rifle as a separate pass rather than one continuous stroke to preserve the crossing bridge.
Devil Emoji Pumpkin Stencil
A devil emoji face stares from this pumpkin stencil: a broad rounded head with two sharp upright horns and jagged scalp flames forms the outer solid shape, while two pill-shaped furrowed-brow pieces, two oval eye cut-outs, and a downturned mouth arc are all pierced through the face below. The large open face area between the feature cuts lets candlelight spill broadly across the design. Cut the small eyebrow ovals first since they sit closest to the top of the face and are easiest to control before the surrounding area is opened.
Devil Girl Pumpkin Stencil
A pin-up devil girl stencil shows a feminine face with two swept horns, one winking eye with full lashes, a smirking open mouth, crossed arms, and a small arrow-tipped tail curling up at the left side. The face features are rendered as solid islands floating within the larger pierced body and hair shapes. Carve the large hair and body outlines first to establish structure, then work inward to the eye and mouth detail; the tiny winking-eye slit is the most fragile cut and should be saved for last.
Devil in Flames Pumpkin Stencil
A snarling devil or demon figure dissolves into horizontal flame streaks in this expert pumpkin stencil, the upper body and bared-teeth face rendered in dense interlocking cuts while dozens of thin parallel flame lines trail outward to the right, tapering to points. Lit from inside, the flames read as a cascading burst of light across the pumpkin surface. Cut the face details first, then work along the flame lines from the body toward the outermost tips, always cutting from the thick base of each flame toward its thin pointed end.
Diagonal Football & Five Laces
A football tilts diagonally across the whole face of the pumpkin, its two end panels and center field pierced through while a thin seam line and five lace bars stay attached as shell. Those slender laces are what push this into hard territory, so cut away from each lace bar rather than toward it and leave the bars for last. The glow through the big panels makes the dark laces pop.
Diamond Nose and Three Teeth
This is the timeless jack-o'-lantern: two triangle eyes, a diamond nose, and a wide crescent grin interrupted by three blocky square teeth, one hanging from the top lip and two rising from the bottom. Everything except the teeth is cut through, with the teeth left as standing tabs of shell. It is an easy, forgiving first carve; cut toward each tooth from both sides rather than sawing across it, so the tabs never take sideways pressure.
Diamond Stingray with Spots
A diamond-bodied stingray glides diagonally across the pumpkin, its spotted back, curled wingtips, eye ridges, and long trailing tail all shaved into the skin with no pierced openings. The spots are left raised while the surrounding body is etched down to glow. Outline the ray first, then shave patiently around each spot; those raised dots are what sell the texture.
Dice and a Toppled Pawn
A dice cup tips over spilling three pip-marked dice across the scene while a toppled game pawn lies nearby in a glowing puddle of lantern light. This shading design is carved entirely by shaving the skin: the cup, dice faces, pawn, and spill area are scraped to different depths while the pip dots stay dark as untouched rind. Rated hard, keep each die's edges square with straight guide cuts before shaving so the cubes stay convincing.
E=MC2 Pumpkin Stencil
Einstein's famous equation is carved as bold block letters spelling E = MC2 across this easy pumpkin stencil, with the superscript "2" rendered in smaller fragments to the upper right of the C. Each letter is a chunky stencil-style cutout with internal bridges holding counter shapes such as the horizontal bars inside the E. The superscript "2" has two small separate island pieces; cut the main letters first and save those two small fragments for last so they don't shift before the surrounding skin is stable.
Eight Teardrops Around Circle
Eight teardrop petals radiate around a central circle cutout, like a glowing daisy or sunburst wheel. Every teardrop and the center are pierced clean through, turning the pumpkin into a lantern that throws petal-shaped light across the porch. Cut the center circle first as your anchor point, then work around the ring, alternating sides so the wall stays balanced as you go.
Eight-Legged Peeled Spider
A giant spider sprawled across the whole pumpkin face, its oval abdomen and small head flanked by eight long jointed legs that bend at sharp knees. The design uses skin-shave shading only: the spider shape is peeled to the pale flesh while the wall stays whole, so it looms in daylight without any pierced holes. At medium difficulty, score the leg outlines first and peel each segment separately to keep the joints sharp.
Eight-Point Star and Diamonds
A large eight point star anchors the center while small diamonds and dots scatter around it like a burst of night sky sparkle. Every shape is a clean cut-through opening, so the pumpkin throws star shaped light across nearby walls and steps. Cut the big star's inner corners with a fine blade and pop the little diamonds out gently to keep their sharp points intact on this medium pattern.
Etched Fish & Fin Rays
A side-view fish with rayed fins, a forked tail, and a dot eye, drawn in bold etched lines across the pumpkin's face. The wall stays intact everywhere: you shave the skin along the body outline, fin rays, and gill lines so they read as bright strokes against dark rind. For this medium shading design, use a small loop tool and keep your line width consistent, since the fin rays lose definition if they blur together.
Fan Tail Fish with Low Notches
A plump fantail goldfish glides across the pumpkin as one big glowing silhouette, with a rounded body, sweeping double tail, and small notched fins along the belly. The entire fish is pierced through in a single connected shape, so it lights up like an aquarium at night. At medium difficulty the low fin notches are the detail work; cut the broad body and tail first, then nick out the small fin points with short careful strokes.
Farm Tractor Pumpkin Stencil
A side-view farm tractor fills this hard-level pumpkin stencil: a large rear wheel with a circular hub and cross-spoke cutouts, a small front wheel with a curved fender, a boxy cab section with cut-out windows, a squared hood, and a vertical exhaust stack. The rear wheel dominates the lower half of the composition and has the most intricate internal detail. Cut the cab windows and exhaust stack openings first while the pumpkin is still fully intact, then work on the large rear wheel spokes last, since removing them will flex the surrounding skin considerably.