Similar pumpkin stencils
View all stencils →About this stencil
Download the Crossed Hockey Sticks pumpkin stencil as a free printable PDF, then tape the pattern to your pumpkin and trace the lines. Two crossed hockey sticks dominate this jack-o-lantern stencil, their long shafts forming an X at center with the curved blade ends fanning out left and right; a small round puck sits below the crossing point. The stick shafts are cut as long thin negative spaces flanking the solid X-shaped pumpkin skin bridge, and each blade features short hatching cuts that add texture on the lit pumpkin. Leave the central skin bridge where the two shafts cross untouched last so the structure stays rigid while you complete the outer blade details. It works as a carving template for a Halloween jack-o'-lantern or a fall porch display. It is rated Beginner-friendly. Actual time varies with preparation, pumpkin size and experience. Larger shapes and shorter cuts. An adult should handle sharp carving tools.
Pumpkin size guide
- 🎃 Small (5 to 7"): print at 80%
- 🎃 Medium (7 to 10"): print at 100% (recommended)
- 🎃 Large (11 to 13"): print at 130%
- 🎃 Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- Transfer the stencil and thin the pumpkin wall to about 3/4 inch across the full design area.
- Carve the puck at the bottom first; its small oval is the easiest warm-up cut.
- Cut each stick shaft from tip to blade end in one continuous stroke, keeping the blade angle consistent along the full length.
- Work the hatched blade textures with a narrow detail blade, making each short parallel cut from the outside edge inward.
- Leave the X intersection of the two shafts for last so the pumpkin stays firm during earlier cuts.
- Light with a candle or puck positioned directly behind the puck symbol so light radiates outward along both shafts.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for, but start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
IntermediateSticks and Puck Pumpkin Stencil
Two hockey sticks cross in a bold X with their curved blades flaring outward at the bottom, a round puck resting between them, and three small dots arcing above like arena lights. The sticks, puck, and dots are all pierced through, leaving a crisp diamond of pumpkin at the center of the X. At medium difficulty that center diamond is the fragile piece, so cut the four stick channels one at a time and never lever the knife against it.
IntermediateCrossed Hockey Sticks and Puck
Two hockey sticks cross in a big X with taped blades angled outward and a puck resting between them at the bottom. This shaded design is carved on a continuous wall, shaving the sticks and puck out of the skin so they glow without any pierced holes, and the blade tape lines stay as raised strips. Keep your shave depth even along both shafts so the long straight lines light uniformly from top to bottom.
Beginner-friendlyGridiron Glow Pumpkin Stencil
A side-view football helmet formed by two big cut-through openings: the main shell shape and a lower slot separated by the face mask bars, which remain as strips of intact rind. The glowing negative space does all the work of drawing the helmet. Cut the large shell opening first, then the smaller mask slots, supporting each thin bar with your free hand as the saw passes beside it.
Beginner-friendlyMatch Point Pumpkin Stencil
A tilted tennis racket with an open oval head leans across the pumpkin while a round ball floats just below the frame. The racket head, handle, and ball are all cut through as chunky, simple shapes with no interior string detail to fuss over. That makes this an easy pattern for team celebrations; carve the long handle in one steady pass so its edges stay parallel.
Beginner-friendlyBasketball Seam Lines
This design turns the whole pumpkin front into a basketball by shaving the classic seam pattern into the skin: one vertical line, one horizontal line, and two curved side arcs. Nothing is cut through; the grooves alone read instantly as a ball, and the round pumpkin does the rest. It is an easy carve, so just score each line lightly with the stencil in place first, then widen the grooves to an even depth.
Beginner-friendlyGame Day Gridiron Pumpkin Stencil
A football sits sideways across the pumpkin with its center lace stripe and six cross laces picked out in pale shaved flesh. The design uses no pierced openings; you shave the skin from the outline band, the end panels, and the laces while the body of the ball stays orange rind. It is an easy first etching project; score the outlines with a knife tip before shaving so your edges stay sharp.