Similar to This
View all stencils →About this stencil
A tilted tennis racket with an open oval head leans across the pumpkin while a round ball floats just below the frame. The racket head, handle, and ball are all cut through as chunky, simple shapes with no interior string detail to fuss over. That makes this an easy pattern for team celebrations; carve the long handle in one steady pass so its edges stay parallel. This design is rated Beginner-friendly and takes most carvers around 30 minutes from trace to glow. Great for kids and first-timers. Big shapes, short cuts.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 40-60 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Open the separate tennis ball. Cut region 1 around the uneven round ball at the lower right. Leave the broad white gap separating it from the racket head and handle.
- Trace the racket as one opening. Cut region 2 around the tilted oval head, narrow neck and flared lower-left handle. Remove the full dark head area; its visible glowing rim in the reference is the inner-wall bevel. Support the handle before the final release.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
AdvancedGymnast in a Split Leap
A gymnast frozen mid split leap, legs stretched into a full horizontal line with arms swept back and hair in a neat bun. The entire figure is cut through as one connected opening, so she glows like a spotlight silhouette on the pumpkin. Rated hard because the legs taper to slim points at the toes; carve from the torso outward and finish the narrow limb tips last with light, shallow strokes.
IntermediateEight-Panel Basketball
A big glowing basketball built from one large circle divided by the ball's signature curved seam lines. The eight panel sections are pierced through while the seam lines stay as intact pumpkin ribs, so the whole ball reads instantly once a candle goes in. The medium challenge is keeping those curved ribs even, so cut alternating panels rather than working around the circle in order, which keeps the wall supported as you go.
AdvancedLeaping Gymnast with Stars
A gymnast soars in a full split leap, one arm reaching skyward toward a trail of stars and a curved comet streak behind her. The whole figure is a shaded carve on a continuous wall, shaving the skin so the silhouette glows without any pierced holes, which preserves the slender arms and pointed toes. Shave the thin limbs in light passes with a small loop tool, since going too deep on those narrow lines risks breaking through.
Expert / ProCrossed Sticks at Forest Rink
Two crossed hockey sticks with taped blades dominate a full outdoor rink scene, complete with a puck at center ice, board fencing, evergreen trees, and distant peaks behind. It is carved entirely by shading: skin is shaved to different depths so the sticks, boards, and treeline glow in layered tones with no pierced holes. Map out three depth levels before you start and shave the brightest areas thinnest, checking often with a light inside.
AdvancedTree Pose with Raised Arms
A serene figure balances in yoga tree pose, arms raised overhead and one foot tucked against the standing leg, flanked by leafy sprigs on a shaved ground line. The design is entirely skin-shave shading with no pierced holes, so the figure glows in pale relief against the dark rind. Shave the torso and legs in long continuous strokes for smooth lines, then detail the thin arms and leaves with a fine gouge.
IntermediateThree Fish Above Two Waves
Three fish swim in a loose diagonal school above two rolling wave bands, with a trail of round bubbles rising toward the stem. Every element is cut through: fish bodies with notched tails, the long curved waves, and the bubble dots all become glowing openings. The waves are the longest cuts, so brace the pumpkin and saw them in smooth continuous strokes; poke the bubbles out first with a round tool while the wall is solid.