Similar pumpkin stencils
View all stencils βAbout this stencil
This free Buzzer Beater pumpkin stencil is a printable PDF pattern you can print at home, tape to your pumpkin, and trace. A big glowing basketball built from one large circle divided by the ball's signature curved seam lines. The eight panel sections are pierced through while the seam lines stay as intact pumpkin ribs, so the whole ball reads instantly once a candle goes in. The medium challenge is keeping those curved ribs even, so cut alternating panels rather than working around the circle in order, which keeps the wall supported as you go. Use it as a carving template for your Halloween jack-o'-lantern. It is rated Intermediate. Estimated time: 75-105 minutes. Actual time varies with preparation, pumpkin size and experience. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 75-105 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Open the two upper inner panels. Cut both regions marked 1, following the round outer edge and curved lower seams. Keep the white vertical center strip and the U-shaped seam attached. Support each plug before releasing its final tab.
- Shape the lower inner panels. Cut both regions marked 2 inside the upward arch near the bottom of the ball. Keep the white central strip intact and avoid pulling against the curved seam as you lift out each plug.
- Carve the upper side panels. Open both regions marked 3. Preserve the white horizontal seam under them and the curved strips beside the first pair. Use short strokes where the outer round edge meets each narrow corner.
- Finish the lower side panels. Cut both regions marked 4 last. Support the surrounding shell from inside, then remove loose fibers. Keep every white straight and curved seam intact; together they connect all remaining material to the outer pumpkin.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
Beginner-friendlyBasketball Seam Lines
This design turns the whole pumpkin front into a basketball by shaving the classic seam pattern into the skin: one vertical line, one horizontal line, and two curved side arcs. Nothing is cut through; the grooves alone read instantly as a ball, and the round pumpkin does the rest. It is an easy carve, so just score each line lightly with the stencil in place first, then widen the grooves to an even depth.
IntermediateHat Trick Pumpkin Stencil
A giant soccer ball covers the face of the pumpkin, built from a central pentagon surrounded by shaved hexagon panels. Nothing is cut through; you peel the skin from the light panels while the pentagons and seam lines stay dark orange, recreating the classic ball pattern. Trace every panel edge with a knife tip before shaving so the straight seams stay crisp, since clean lines are what sell the geometry.
Beginner-friendlyMatch Point Pumpkin Stencil
A tilted tennis racket with an open oval head leans across the pumpkin while a round ball floats just below the frame. The racket head, handle, and ball are all cut through as chunky, simple shapes with no interior string detail to fuss over. That makes this an easy pattern for team celebrations; carve the long handle in one steady pass so its edges stay parallel.
AdvancedGymnast in a Split Leap
A gymnast frozen mid split leap, legs stretched into a full horizontal line with arms swept back and hair in a neat bun. The entire figure is cut through as one connected opening, so she glows like a spotlight silhouette on the pumpkin. Rated hard because the legs taper to slim points at the toes; carve from the torso outward and finish the narrow limb tips last with light, shallow strokes.
Beginner-friendlyBasketball Pumpkin Stencil
A basketball pumpkin stencil showing the ball as a large circle divided by one vertical center line and two curving seam arcs, creating four large curved panel segments that are carved through as open glowing quarters. The vertical and curved seam lines remain solid, producing the classic basketball court-line pattern when lit. Because this is an easy design with only four large pieces to cut, keep the blade on the outer circle first, then trace each interior seam line precisely to maintain even-width bridge strips between the panels.
AdvancedSports Balls Pumpkin Stencil
Four sports balls are stacked and overlapping in a loose cluster: a soccer ball at the top with its pentagon-patch pattern, a football on the left with stitching lines, a basketball on the right with its curved seam lines, and a baseball at the front center with a double-stitch seam. Each ball's distinctive surface markings are left as uncut pumpkin ridges, so when lit the glowing interior shines through the open areas between stitches and panel gaps. Carve the baseball's curved stitch lines last since they are the finest linework and benefit from the stability of the surrounding cuts already in place.





