Similar pumpkin stencils
View all stencils →About this stencil
This free Basketball pumpkin stencil is a printable PDF pattern you can print at home, tape to your pumpkin, and trace. A basketball pumpkin stencil showing the ball as a large circle divided by one vertical center line and two curving seam arcs, creating four large curved panel segments that are carved through as open glowing quarters. The vertical and curved seam lines remain solid, producing the classic basketball court-line pattern when lit. Because this is an easy design with only four large pieces to cut, keep the blade on the outer circle first, then trace each interior seam line precisely to maintain even-width bridge strips between the panels. Use it as a carving template for your Halloween jack-o'-lantern. It is rated Beginner-friendly. Estimated time: 45-60 minutes. Actual time varies with preparation, pumpkin size and experience. Larger shapes and shorter cuts. An adult should handle sharp carving tools.
Pumpkin size guide
- 🎃 Small (5 to 7"): print at 80%
- 🎃 Medium (7 to 10"): print at 100% (recommended)
- 🎃 Large (11 to 13"): print at 130%
- 🎃 Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the gray areas on the printable pattern are the pieces you remove, and everything white stays attached. The steps below give you the safest carving order. Plan on about 45-60 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Plan around the seam strips. The white horizontal line, vertical line, and two curved seams between the panels are what make this read as a basketball. Every cut stops at their edges; never let two panels connect.
- Cut the four upper panels. Remove the top four curved panels one at a time, starting with the two smaller center ones. Trace each seam edge cleanly so the white strips stay an even width.
- Cut the four lower panels. Repeat below the horizontal seam. Cut the two small center panels first, then the larger outer wedges.
- Release the outer edges. Finish the outer circle arcs of the two biggest side panels last. Leave a small tab on each large panel, support the plug flat with your hand, and make the tab cut final so the curved seams never take the strain.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every piece is out, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for, but start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
Beginner-friendlyBasketball Seam Lines
This design turns the whole pumpkin front into a basketball by shaving the classic seam pattern into the skin: one vertical line, one horizontal line, and two curved side arcs. Nothing is cut through; the grooves alone read instantly as a ball, and the round pumpkin does the rest. It is an easy carve, so just score each line lightly with the stencil in place first, then widen the grooves to an even depth.
IntermediateBuzzer Beater Pumpkin Stencil
A big glowing basketball built from one large circle divided by the ball's signature curved seam lines. The eight panel sections are pierced through while the seam lines stay as intact pumpkin ribs, so the whole ball reads instantly once a candle goes in. The medium challenge is keeping those curved ribs even, so cut alternating panels rather than working around the circle in order, which keeps the wall supported as you go.
Beginner-friendlyGridiron Glow Pumpkin Stencil
A side-view football helmet formed by two big cut-through openings: the main shell shape and a lower slot separated by the face mask bars, which remain as strips of intact rind. The glowing negative space does all the work of drawing the helmet. Cut the large shell opening first, then the smaller mask slots, supporting each thin bar with your free hand as the saw passes beside it.
Beginner-friendlyMatch Point Pumpkin Stencil
A tilted tennis racket with an open oval head leans across the pumpkin while a round ball floats just below the frame. The racket head, handle, and ball are all cut through as chunky, simple shapes with no interior string detail to fuss over. That makes this an easy pattern for team celebrations; carve the long handle in one steady pass so its edges stay parallel.
Beginner-friendlyGame Day Gridiron Pumpkin Stencil
A football sits sideways across the pumpkin with its center lace stripe and six cross laces picked out in pale shaved flesh. The design uses no pierced openings; you shave the skin from the outline band, the end panels, and the laces while the body of the ball stays orange rind. It is an easy first etching project; score the outlines with a knife tip before shaving so your edges stay sharp.
Beginner-friendlyVolleyball Pumpkin Stencil
A volleyball fills this easy pumpkin stencil from edge to edge, its circular outline and internal panel lines rendered in the classic three-curved-line pattern that divides the ball into panels. The wide panel sections are cut away, leaving the curved dividing strips as solid pumpkin flesh that forms the seam lines. When lit, the jack-o-lantern glows through the large open panels while the seam lines stay dark. Score along each curved seam line with a detail tool before cutting to keep the thin curved strips from tearing under the blade.