Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
212 results · Page 3 of 6
Galaxy with Three Planets
A sweeping spiral galaxy wraps across the entire pumpkin face, its curved arms shaved in graduated depths so the core glows brightest, while three ringed planets and scattered stars orbit the edges in raised relief. Nothing is pierced; every effect comes from continuous-wall shading at different thicknesses. Expert-level patience pays off here: establish the spiral arms as broad shallow bands first, then deepen toward the center in passes to build the luminous gradient.
Gear Cross and Three Dots
A chunky steampunk gear glowing around a solid crossbar, with three round rivet dots floating beside it like escaping sparks. The spaces between the gear teeth and the four windows inside the cog are cut through, while the cross-shaped bar stays attached to the pumpkin wall and holds everything together. Carve the small dots first, then the gear windows, and keep the crossbar at least a finger wide so the design stays rigid.
Gecko with Thirteen Toe Tips
A gecko sprawls diagonally across the pumpkin as one bold silhouette, splayed toes gripping and its thick tail curving away. The entire lizard is a single cut-through aperture, so the whole body glows as one connected shape with those distinctive rounded toe pads catching the light. At medium difficulty, the toes are the trick: cut each tiny pad by connecting it to its leg with a short channel, and remove the big body piece last.
God Bless the USA Pumpkin Stencil
Bold block lettering spells out "GOD BLESS THE U.S.A." across two lines, with small five-pointed stars separating the letters in the lower line. The upper row uses chunky serif-style caps and the lower row uses even larger, slightly decorative capitals. Every letter interior is pierced through so the full phrase blazes when the pumpkin is lit. Keep the thin straps of orange between adjacent tall letters intact as you carve, since they carry the structural load of the entire upper row.
Golf Iron with Dimpled Ball
A classic golf iron leans behind a dimpled ball sitting in a tuft of rough grass, all done in skin-shave shading with no pierced openings. The club face grooves, ball dimples, and grass blades are etched at varying depths so each element glows in its own warm tone. Score your outlines first, then shave between them; the fine groove and dimple details reward a light touch.
Golf Iron, Ball & Grass
A golf iron sweeps diagonally across the pumpkin toward a dimpled ball perched on a tee, with tufts of grass sprouting along the bottom edge. The clubhead grooves, ball dimples, and grass blades are all shaved into the skin at different depths, so the scene glows in layers without a single pierced hole. Shave the big shapes first, then come back with a detail tool for the grooves and dimples.
Great Horned Owl Face Pumpkin Stencil
A fierce great-horned owl face looms forward in this expert pumpkin stencil, with two large almond-shaped eye cavities framed by heavy curved brow ridges, a sharp pointed beak at center, ear tufts sweeping upward and outward, and dense spiky feather tips radiating outward from the face. The background within each eye cavity and around the brow is cut away in multiple sections, while the beak, brow ridges, and outer feather spikes stay solid as orange bridges. Begin with the eye cavities early to anchor symmetry, then cut the spiky outer feather tips last since they are the most likely to snap.
Gymnast in a Split Leap
A gymnast frozen mid split leap, legs stretched into a full horizontal line with arms swept back and hair in a neat bun. The entire figure is cut through as one connected opening, so she glows like a spotlight silhouette on the pumpkin. Rated hard because the legs taper to slim points at the toes; carve from the torso outward and finish the narrow limb tips last with light, shallow strokes.
Hammerhead with Raw Back
A sculptural hammerhead shark carved in raised relief, with the background cleared away so the body, fins, and curved tail stand proud of the wall in layered depths. Fin edges, the mouth line, and gill grooves are incised for realistic detail while nothing pierces through. Rough out the background to one even depth before shaping the shark itself, and keep at least half the wall thickness so the raised body stays sturdy.
Hammerhead with Unequal Fins
A hammerhead shark cruising in full profile, its wide flattened head, tall dorsal fin, and forked tail all reading instantly in silhouette. The complete shark is one cut-through opening that stretches across the pumpkin's widest face for a dramatic glowing display. An easy carve with one caution: the slim notch between the tail forks is delicate, so cut it before removing the large body piece.
Handlebar Mustache Pumpkin Stencil
A wide, curling handlebar mustache is the sole design element of this introductory pumpkin stencil, carved as a single large open shape that sweeps across the pumpkin face. The ends curl upward and outward in tight spirals, while the center dips in a gentle U. The entire mustache is pierced through as one connected opening, so the glow reads as a bold, immediately legible silhouette. Because the cut is one continuous piece, score the center dip first and work outward toward each curled tip to keep the shape from shifting as material is removed.
Hawaii Island Chain
The Hawaiian island chain sweeps diagonally across the pumpkin, with eight separate glowing cutouts running from Niihau and Kauai down to the Big Island. Each island is its own small pierced opening, so the surrounding shell needs no bridges at all. Carve the largest island first to get a feel for the wall thickness, then use a fine detail saw for the smaller islands so their shapes stay distinct.
Helmet with Two Guard Openings
A side-view football helmet formed by two big cut-through openings: the main shell shape and a lower slot separated by the face mask bars, which remain as strips of intact rind. The glowing negative space does all the work of drawing the helmet. Cut the large shell opening first, then the smaller mask slots, supporting each thin bar with your free hand as the saw passes beside it.
I Love Arkansas Pumpkin Stencil
The Arkansas stencil uses the standard "I Love" pumpkin layout: a block I, a full heart, and the two-letter abbreviation AR in rounded type. Both letters are open silhouettes with no interior counters, making this a clean, beginner-friendly carve with four distinct glowing shapes. The R's open leg curves slightly inward, so trace it with a pin tool before cutting to confirm the exact endpoint of that stroke before committing the blade.
Indiana Heart Lettering
A classic love-note layout carved in glowing letters: a bold capital I beside a big heart on the top row, with the letters I and N spelling Indiana's abbreviation below. All four elements are pierced through, and the chunky serif letterforms keep every stroke wide and sturdy. This easy design just needs straight, confident cuts; trace the letter edges with a fine tip first, then saw along the lines so the serifs stay square.
Jellyfish with Fifteen Bubbles
A dramatic jellyfish drifts down the tall face of the pumpkin, its ribbed bell crowning a tangle of long ribbon tentacles surrounded by fifteen bubbles of varying size. Everything is shaved relief with no pierced holes, and the overlapping tentacles at different depths are what make it an expert etch. Vary your shaving depth deliberately, deepest where tentacles cross behind others, to build the layered, flowing effect.
Jolly Roger Pumpkin Stencil
A classic Jolly Roger composition fills this hard pumpkin stencil: a large tricorn pirate hat at the top with an X emblem on its band, a grinning skull face below with oval eyes and a row of small separated teeth, and two crossed cutlass swords extending diagonally from behind the skull. The swords are cut as wide open shapes that frame the face, while the skull's eye sockets and the gaps between each tooth are the smallest, most fragile details. Carve the broad sword shapes first to release the large areas of pumpkin skin, then work inward to the fine tooth gaps using a narrow pointed blade.
Layered Compass Star Relief
A layered compass-rose mandala: an eight-point star nests inside a larger star, all wrapped in a ring of carved circles and framed by a shaved border medallion. The entire design is relief work at several depths with no pierced openings, which is why it rates expert. Establish the shallowest background layer first, then step each inner layer progressively deeper so the star points read as crisp raised facets.
Leaping Dolphin & Two Waves
A dolphin arcs joyfully above two rolling waves, its curved body, dorsal fin, flippers, and smiling beak all drawn in bright shaded lines. The design uses skin-shave shading only, so you scrape away the outer skin along the dolphin and wave shapes while the wall stays solid. At medium difficulty, work the long body curve in one smooth continuous pass before adding the wave lines, which keeps the leap looking fluid.
Leaping Gymnast with Stars
A gymnast soars in a full split leap, one arm reaching skyward toward a trail of stars and a curved comet streak behind her. The whole figure is a shaded carve on a continuous wall, shaving the skin so the silhouette glows without any pierced holes, which preserves the slender arms and pointed toes. Shave the thin limbs in light passes with a small loop tool, since going too deep on those narrow lines risks breaking through.
Left-Facing Hammerhead Shark
A left-facing hammerhead shark in full profile, wide head, tall dorsal fin, and swept tail, finished with three short gill slashes behind the head. The whole body is a shaded shape: you peel the skin inside the outline down to pale flesh and leave the pumpkin wall intact. Shave with the grain in long horizontal strokes to keep the body smooth, then deepen the gill lines and eye dot last for contrast.
LGBTQIA2S+ Heart Pumpkin Stencil
A large bold heart silhouette is the main shape, with the text "LGBTQIA2S+" set in thick stencil letters running horizontally across the heart's center. The heart is cut in two halves separated by the text band, which itself is cut through except for the letter bridges. Lit from inside, the whole heart glows with the text reading as solid orange stripes across the opening. Carve the upper and lower heart halves before the text strip to keep the letter bridges from tearing while the wall is still reinforced.
Lightning Bolt and Three Dots
A jagged lightning bolt zigzags down the center of the pumpkin, flanked by three round dots that glow like sparks of static. All four shapes are pierced through, and the small count of cuts makes this a fast, satisfying easy carve with a bold graphic punch. Cut the bolt's long diagonals first, then finish the sharp inner angles from each direction so the points stay crisp instead of tearing.
Lightning Bolt and Two Stars
A big lightning bolt zigzags down the center of the pumpkin, surrounded by two five-point stars and a scatter of round dots. Every shape is cut clean through, so the bolt blazes with candlelight while the stars and dots sparkle around it. The bolt is one straightforward opening with sharp interior angles; make a small relief cut at each zigzag corner so the blade can pivot without cracking the rind.
Lion Head Pumpkin Stencil
A majestic lion's head fills this pumpkin stencil from edge to edge, its full flowing mane rendered in sweeping curved cuts that radiate outward like flames, with the face centered and features defined by pierced nostrils, brow lines, and an open lower jaw. Lit from inside, the solid orange pumpkin forms the mane and facial structure while the cut gaps create the dramatic shading between mane locks. Begin carving in the outermost mane tips, where cuts are shortest, and work inward toward the face so the central wall remains stable while you navigate the most intricate facial detail cuts.
Locs Portrait Pumpkin Stencil
A close-up portrait of a man with long twisted locs, rendered in bold cut-through shapes that frame his eyes, cheekbones, and jaw in dramatic silhouette. The face is built from large negative spaces separated by solid orange bridges, so candlelight floods the features when lit. Start by cutting the forehead and cheek openings first; leave the thin vertical bridge between the nose and mouth intact until last to prevent the whole face from sagging during carving.
Long-Nosed Abstract Face
An abstract face in a modern-art style: a sweeping brow arc crosses the top, a long straight nose drops down the middle, curled spiral shapes form the cheeks, and short hatch marks add texture beside one eye. Each line is a pierced channel, so the portrait glows as a set of elegant strokes. At hard difficulty the narrow curved channels are the challenge; keep them at least a finger-width and undercut the edges slightly so light spreads.
Louisiana State Shape
Louisiana's famous boot shape carved as a single luminous cutout, from the squared northern border down through the ragged bayou coastline and the toe of the delta. The entire state is removed so light floods the shape, with the surrounding pumpkin left solid. Rated hard because of the frayed coastal edges; use a thin detail saw for those little inlets and cut the delicate toe section last so it stays supported.
LOVE Block Pumpkin Stencil
"LOVE" is arranged in a two-by-two block format, with "LO" on the top row and "VE" below, echoing the famous Robert Indiana sculpture. Each letter is cut through in rounded, chunky sans-serif type and the four characters together form a near-square composition. The internal counters of the "O" and the enclosed angle of the "V" need to be freed as islands; carve those interior pieces before removing the surrounding letter bodies so they stay fixed in place by the adjacent wall material.
Maine State Shape
Maine's craggy outline fills the pumpkin as a single glowing cutout, from the pointed northern crown down to its famously jagged coastline. The entire state interior is removed while the rind around it stays solid, so the border reads crisply once lit. The ragged coastal edge is what makes this a medium carve: trace it slowly with a fine saw and do not worry about tiny inlets, since the overall shape sells the design from a few feet away.
Male Portrait Pumpkin Stencil
A male portrait rendered in spare, angular linework fills this hard pumpkin stencil: a large angular head shape, a distinctive widow's peak hairline, deep-set eye sockets with small cutout irises, a long straight nose, and a square jaw with a chin dimple. The design uses wide open negative shapes separated by just a few thin structural bridges, so the lit portrait reads as a bold, high-contrast face. The narrow bridge between the nose and the upper lip is the most vulnerable point, so score it lightly before making any cuts on either side of it.
Man Portrait Pumpkin Stencil
A scowling man's portrait rendered in tight linework stares out from this expert pumpkin stencil, one hand raised in a defiant gesture with a skeleton hand overlaid on it, the figure's jacket and muscular build conveyed through angled slash cuts below the face. The design relies on many small interior cuts to build the facial features, making it a demanding carve. Tackle the densely detailed face first, cutting the brow wrinkles, nostril, and lip cuts before opening any of the larger torso voids.
Margarita and Citrus Wheel
A wide-rimmed margarita glass on a slender stem, garnished with a citrus wheel notched onto the rim, its segments radiating like a tiny sun. This is a shading design: the glass, stem, and fruit are shaved to different depths so the salt-rimmed bowl reads brighter than the stem. Etch the citrus wheel's thin segment lines with a V-tool after the broad shapes are done so they stay crisp.
Martini Glass with Olive
A tall martini glass with a skewered olive resting on the rim, drawn in clean bar-sign style from the wide conical bowl down the slender stem to the round base. It carves as skin-shave shading, so the glass appears as smooth pale relief against the dark rind with no pierced openings. A medium project overall; keep your peeling depth even across the big bowl, and leave the thin stem for careful last strokes.
Maryland Pumpkin Stencil
Maryland's instantly recognizable outline appears as a single cut-through silhouette on this pumpkin stencil, showing the state's wide rectangular body, the deeply indented Chesapeake Bay notch along the right side, the narrow Eastern Shore peninsula, and the small western panhandle extending to the left. Because the Bay notch splits the right edge into two separate lobes, the wall between them is slender. Cut the inner Bay-notch corners first using a pointed blade so that delicate section doesn't flex and tear while you remove the larger open areas.
Maryland State Shape
Maryland glows inside a carved rectangular window, its straight northern border on top and the deeply notched Chesapeake Bay splitting the eastern shore from the mainland. The bay itself is left as standing pumpkin wall, so the two glowing landmasses frame it dramatically. That narrow bay peninsula is what makes this a hard carve; cut away from it on both sides, keep the strip at least a finger wide, and brace it from inside if needed.