Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
318 results · Page 7 of 9
Sea Urchin Pumpkin Stencil
A stylized sea-urchin or crown-of-thorns creature gazes out from this hard-level pumpkin stencil, with five rows of triangular spines radiating above a cute wide-eyed face: two large round eyes accented by lash-like lines, two nostril dots, a small open mouth, and curved tentacle arms spreading at the bottom. Each triangular spine and the large rectangular tooth shapes are cut away so candlelight shoots upward through the spines while the eyes and mouth glow below. Pierce the tiny nostril dots and lash-line cuts first while the face is still fully rigid.
Seahorse with a Ribbed Fan
An elegant seahorse posed upright with a ridged, segmented body, a ribbed fan fin on its back, and a tail that coils into a tight spiral. This is a shading pattern: you carve away skin at varying shallow depths to sculpt the plates, fin ribs, and curl while the wall stays solid. Rated hard for its fine detail, it rewards a light touch; work the tiny tail spiral with a small gouge last.
Seahorse with Ten Raw Plates
An elegant seahorse curls down the pumpkin in profile, its coronet, snout, banded belly plates, back fin, and spiral tail all rendered in carved relief. This is a shading design: the body is shaved to a pale glow while the plate lines and outline are left or scraped at different depths for dimension, with no pierced openings. Rated hard for its fine segmentation, shave the belly bands one at a time and keep each dividing ridge intact.
Seal Outline & Whiskers
A playful seal rendered in flowing line art, propped up on its front flippers with whiskers, a bright eye, and body contours traced in glowing strokes. Nothing is cut through; you shave the skin along each outline so the lines light up like neon while the wall stays solid. Since medium-difficulty shading rewards steady hands, score the outlines with a knife tip first, then widen them evenly with a small gouge.
Seated Capybara with Smile
The internet's favorite chill rodent sits in calm profile, its whole rounded body glowing warmly with a small dark eye and nostril left as untouched spots of skin. Rather than piercing the wall, you shave the capybara's full silhouette down to the inner flesh so it lights up as one soft shape. For this medium shading carve, peel the big body areas with a flat scraper, thin them evenly, and leave the eye and nose dots strictly alone.
Seated Dog with Bone and Dots
A patient pup sits in profile, ears perked and tail resting, while a bone floats nearby with a trail of small dream-bubble dots connecting them. The dog's body, the bone, and the dots are all cut fully through as bold, separate openings, so the scene reads instantly from the street. This easy design has no fragile interior bridges; just cut the large dog body in two or three sections and pop the bone and dots out last for a tidy finish.
Seated Puppy with Two Hearts
A floppy-eared puppy sits in profile, tail up, while two hearts float above its nose like puppy love made visible. The dog silhouette and both hearts are cut fully through, so the whole scene glows in warm friendly light with the pumpkin rind forming the night around it. This easy pattern is great for kids with supervision; carve the two small hearts first for practice, then tackle the big puppy shape in comfortable sections.
Seated Rabbit with Split Ears
A seated rabbit in profile with two tall split ears, a rounded back, and tucked front paws, cut through as a nearly single silhouette with slim gaps defining the ears and feet. The shell around the bunny stays whole so the glowing shape reads crisply from a distance. Carve the narrow gap between the ears first; it is the finest cut on an otherwise smooth outline.
Seven Hearts in a Tall Zigzag
Seven hearts zigzag down the front in an alternating left-right column, with small round dots sprinkled between them for sparkle. Each heart and dot cuts fully through, and the vertical layout is made for tall, skinny pumpkins and gourds. A medium carve mostly for the layout; tape the stencil straight down the tallest face before transferring, and carve from the top heart downward so shavings fall clear of finished cuts.
Seven Stars in a Winding Trail
Seven five-pointed stars of varying sizes wind down the pumpkin in a gentle S-curve, like a constellation trailing across the night sky. Each star is a full cut-through opening, so the finished lantern twinkles from every angle. Star points are where beginners slip, so cut each arm from the outer tip inward toward the center and let the cuts meet, which keeps all five points sharp on every star.
Seven-Rib Shell and Three Dots
A fan-shaped scallop shell spreads seven glowing ribs from a hinged base, crowned by three small round dots floating above like sea spray. Each rib is its own cut-through opening separated by strips of intact wall, so the shell keeps its elegant ridged look when lit. Cut the center rib first and work outward symmetrically, keeping the dividing strips at least a finger-width so the fan stays strong.
Shaggy Cat Pumpkin Stencil
A sleek cat sits upright in this expert-level pumpkin stencil, its fur rendered in dozens of jagged, flowing cuts that create a shaggy, windswept silhouette from pointed ears to a curled tail tip. Narrow slivers form the whiskers and facial detail, while the body interior is laced with thin connecting bridges. When lit, the cat pumpkin carving glows with textured depth. Carve the whisker lines last and from the center outward, since they are the most likely to snap if the surrounding flesh shifts.
Shell Fan With Two Dots
Five elongated petal-shaped openings fan out from a point near the base, forming a glowing scallop shell topped by two small round dots below. Each opening is fully pierced, and the ribs of shell left between them create the fan effect. Keep those dividing ribs at least half an inch wide as you cut so the fan holds its structure, working from the center petal outward.
Side-View Penguin
A plump penguin stands in profile with its beak raised, and the design is built entirely from skin shading rather than pierced cuts. You shave away the rind across the penguin's white belly and face for a bright glow, leave the darker back and flipper as untouched skin, and etch a fine outline around the whole bird. For this medium etch, remove the belly in shallow, even layers and stop as soon as light glows through at test lighting.
Simple Crescent & Star
A slim crescent moon curves beside a small five-pointed star, both cut fully through so the pair glows like a night sky against the pumpkin. There are only two openings, which keeps the carve quick and tidy. The tapered tips of the crescent are the trickiest cuts, so work from the widest part of the moon toward each point and let the tips meet cleanly rather than forcing the blade.
Simple Daisy Flower
A cheerful five-petal daisy with a round center, sized to fill the front of a medium pumpkin. Nothing is pierced through: you shave the skin off each petal and the center circle so they glow softly while the outlines stay as untouched rind. Because this is an easy shading design, scrape each petal to an even depth of about half the wall thickness so all five light up with the same warm tone.
Sitting Black Cat Pumpkin Stencil
A cartoon-style black cat sits centered in a large oval cutout on this pumpkin stencil, its round body, pointy ears, and grinning face left as pumpkin skin while the oval background glows with light. The curling spiral tail sweeps to the right inside the oval, and thin whisker lines extend from each cheek. When carving, cut the large background oval first to establish the shape, then carefully remove the small eye and smile details, keeping the curled tail's narrow inner spiral intact by working slowly around its center loop.
Sitting Bunny Pumpkin Stencil
A plump, sitting rabbit faces left in clean silhouette for this beginner-friendly pumpkin stencil, with two tall ears, a rounded body, and chunky hind feet all carved as a single open shape. The entire figure is pierced through, so the warm glow of a candle outlines the bunny against the night. Because the ears are connected only at the base, cut them last to avoid accidentally snapping the narrow junction before the rest of the design is secure.
Sitting Cat & Curled Tail
A cat sits in profile with its ears up and its long tail curling around its feet, all rendered as one softly glowing shape. Instead of cutting holes, you shave away the skin inside the outline so the thinner wall lights up while the pumpkin stays sealed. Use a loop tool or vegetable peeler and keep the depth even; this easy shading style is very forgiving for first timers.
Sitting Cat Pumpkin Stencil
A young sitting cat looks upward with closed contented eyes, a round head, pointed ears with inner-ear detail, whisker lines, a small nose, and a curling tail visible at the lower right. The design uses a mix of large pierced areas for the background and solid islands for the face features, creating a charming cat pumpkin stencil. The whisker-line cuts are the thinnest elements; score them lightly first and remove the pumpkin skin in a single clean slice rather than sawing back and forth to keep them from cracking.
Sitting Puppy Pumpkin Stencil
A round-eared puppy sits upright in simple silhouette on this dog pumpkin stencil, its floppy ears, chunky paws, and curled tail all reading as a single clean cutout against the glowing orange skin. The entire figure is pierced through so candlelight throws a bold dark-dog shape onto surrounding surfaces. Because the ear tips sit very close to the body, cut the space between left ear and head first to keep that bridge intact while the rest of the wall is still firm.
Sitting Rabbit with Long Ears
A serene rabbit sits in profile with tall upright ears, delicate whiskers, and a rounded haunch, filling most of the pumpkin's face. The entire figure is shaved from the skin as a raised relief, with fine scored lines suggesting fur and limb contours, so nothing pierces the wall and it works beautifully as a table centerpiece. Shave the broad body areas first, then add the fur strokes with light flicks of a detail knife.
Six Hearts and Tiny Top Heart
Six hearts arranged in a ring point inward toward the center, with a tiny seventh heart crowning the top and small round dots filling the gaps between them like beads on a wreath. Every heart and dot is cut fully through, creating a lantern that throws a circle of glowing hearts across the porch. For this medium carve, poke a starter hole in each heart and cut the notch last; the dots are quick work with an apple corer or drill bit.
Six Petals and Six Dots
A six-petal flower blooms at the center, each teardrop petal cut fully through around a solid rind disc that forms the flower's middle. Six small round holes circle the bloom like scattered seeds, letting extra pinpoints of light through. Designed to shine on a bottle gourd or pumpkin as a garden lantern; a medium carve where the main care point is keeping the petal tips from tearing into the neighboring holes.
Sleeping Moon, Stars & Cloud
A sleepy crescent moon with a gentle closed-eye face drifts above a puffy cloud, with two twinkling stars floating at its side. Most of the design is shaded by shaving the skin so the moon and cloud glow softly, while the stars can be etched to match. Keep your shave shallow on the facial features, going just deep enough on the eyelid and lips that they read as darker lines.
Sleepy Eyes and Eight Lashes
Two closed crescent eyes with four little lashes apiece rest above a small oval mouth, while round dots on each side form rosy cheeks for a sweetly sleeping face. Every crescent, lash, dot, and the mouth is pierced through, so the tiny lash cuts do the expressive work. Cut the two big crescents first, then add the short lash strokes with a fine saw, keeping each one clear of its neighbor.
Sloth Pumpkin Stencil
A sloth clings with its long clawed arm across the center of this easy pumpkin stencil, its round face showing closed or half-shut eyes and a compact round nose, with a shaggy fur outline around the head and a rounded body below. The large body and arm openings are cut through while the face detail pieces stay solid, so the lit pumpkin shows the sloth's relaxed expression clearly outlined in orange. Cut the small eye-detail pieces before opening the large arm void so those delicate shapes have full surrounding support.
Small Cat With Crescent Smile
A sweet cat face scaled for small pumpkins, with almond eyes topped by pointed ear notches, a tiny triangle nose, a crescent smile, and two slender whiskers flaring from each cheek. Everything cuts fully through, and the shapes are simple and forgiving. The whiskers are the only delicate part; cut each one as two long strokes meeting at the tip instead of dragging the saw sideways through the narrow slit.
Small Triangle-Eyed Smile
Made with small pumpkins in mind, this cheerful face uses two modest triangle eyes and a single wide crescent smile with no teeth to fuss over. All three shapes are cut straight through, giving a warm, friendly glow from even a tabletop-sized pumpkin. It is one of the easiest carves on the site; on a small pumpkin, use a thin serrated saw and cut the smile from the center outward so the thin curve stays even.
Small-Eyed Dog and Short Smile
A sweet puppy face fills the pumpkin: two long floppy ears drooping down the sides, small round eyes, a rounded nose, and a short curved smile beneath it. The ears, eyes, nose, and mouth are all cut through, so the whole dog glows warmly after dark. Rated medium mainly for the large ear openings; leave a generous strip of wall between each ear and the eyes so the face stays sturdy.
Smiley Face Pumpkin Stencil
A classic smiley face fills this easy pumpkin stencil: a broken circle made of twelve short arc segments forms the head outline, two tall oval eyes sit in the upper face, and a wide curved smile with rounded upturn ends completes the expression, all cut through as open negative space. The twelve dash segments that form the outer circle are separated by small uncut gaps, creating a dotted-ring effect when lit. Carve the outer arc segments first to define the circle, then cut the eyes and smile; the uncut gaps between segments are intentional and should be left untouched.
Smiling Alien Face Pumpkin Stencil
An alien face with a wide oval cranium fills this pumpkin stencil, featuring two large bulging almond-shaped eyes with small hooked inner corners, a two-dot nose, a curved smile, and a rounded forehead band rendered as arcing cut-through lines. The eye shapes and facial features are each separate pierces, while the outer oval head outline is also cut away, framing everything in open light. The narrow forehead arc is the most fragile element, so score it fully before pushing through to avoid it snapping midway.
Smiling Narwhal & Two Fins
A smiling narwhal glides across the pumpkin with a long spiral tusk, two side fins, and a happy upturned mouth. The whole body is skin-shave work with no pierced holes, so the pale shaved shape stands out against the dark rind by day and glows gently with a light inside. On this medium shading design, etch the thin tusk and smile lines first with a fine V-tool, then clear the wide body area so you never drag a big tool across your detail lines.
Smiling Sea Turtle
A smiling sea turtle paddles across the pumpkin, its patterned shell divided into glowing plates while thin ribbons of skin stay in place to draw the head, flippers, and shell segments. This is a shading-style design carved on a continuous wall, so you shave away the skin rather than piercing holes, letting the whole turtle glow softly. Shave in thin layers and test with a light often until the flippers and shell panels shine evenly.
Snail Pumpkin Stencil
A giant snail is the surprising subject here: a segmented spiral shell packed with dashed arc cutouts occupies most of the design, while the snail's body stretches out to the right and two small eyestalks rise from the head. The shell is built from concentric broken rings that leave thin solid bridges between segments, and the effect when lit is an intricate circular lantern orbited by a slow-moving creature. Cut the outermost arc segments of the shell first and work inward toward the central solid disc so the bridges hold until last.
Spider Web Pumpkin Stencil
An expert-level spider web pumpkin stencil featuring a large radiating cobweb that fills the pumpkin face, with concentric rings connected by curved spoke segments creating dozens of small trapezoidal cells to cut through. A small cartoonish spider with round body and eight outstretched legs sits in the lower right corner. The web structure stays intact because the solid spokes and ring arcs are left as orange skin while every cell between them is pierced. Work from the center hub outward ring by ring, finishing the spider body last since its legs are the most fragile pieces.