Pumpkin carving templates
1159 free printable stencils. Download, print, trace, carve.
26 results · Page 1 of 1
Arched Eyes and Six Freckles
A vintage-style pumpkin face with tall arched eyes, a triangle nose, a gap-toothed smile, and six little freckle holes dotted across the cheeks. The eyes, nose, mouth, and freckles all cut through, and each eye keeps a rooted pupil tab attached at the bottom for old-fashioned character. Drill or poke the freckles first with a small round tool, and cut toward each pupil tab's base so those thin anchors survive.
Barred Eyes and Ten Grin Slots
A vintage sugar-skull-style face packed with detail: huge round eyes crossed by curved bars, arching brow flourishes, a diamond nose, ten scalloped tooth slots in a wide grin, and comma-shaped swirls framing the cheeks. Everything is cut through, with slim rind bridges holding the eye bars and tooth dividers in place. As an expert pattern, treat those bridges as sacred; cut away from them, never toward them, and remove waste in small pieces.
Bridged Peace Sign
A bold peace symbol fills the face of the pumpkin, its glowing ring and spokes formed by cutting away the four wedge-shaped spaces between them. Thin uncut bridges hold the outer ring to the pumpkin wall, which is exactly what makes this a medium carve. Cut each wedge slowly and leave the connecting bridges at least a finger-width wide; if a spoke feels wobbly, shave it thinner from the inside rather than recutting the front.
Connecticut Pumpkin Stencil
Connecticut's compact, slightly irregular state outline fills this easy pumpkin stencil: a roughly rectangular silhouette with a gentle concave nick at the lower-right corner and subtly wavy edges that trace the actual border contours. The entire shape cuts out as a single piece, glowing in isolation against the uncut orange pumpkin skin. Because the outline has no interior detail, the challenge is keeping the thin shell border even, so use a small detail saw and rotate the pumpkin rather than repositioning your hand at the tight lower-right corner.
Crescent with Diamond Halo
A bold crescent moon sits at the center of a decorative halo made of alternating circle and diamond openings. Everything is cut fully through, and the ring of small shapes scatters points of light around the big central glow for a celestial, almost boho look. Carve the crescent first, then work around the halo one shape at a time, spacing your cuts so the rind bridges between openings stay sturdy.
Five Stars Around a Crescent
A crescent moon anchors one side while five stars and a scattering of small round dot holes twinkle across the rest of the pumpkin like a busy night sky. Every element is cut through, and the pattern wraps wide, which suits a bumpy or warty pumpkin beautifully. The medium rating comes from the sheer count of pieces, so drill or punch the little dots first as reference points, then carve the stars and finish with the big crescent.
Florida Pumpkin Stencil
The outline of the state of Florida is cut as a single solid silhouette on this states pumpkin stencil: the long panhandle extends left, and the distinctive peninsula curves south and ends in a ragged coastline. The entire shape is one continuous void with no internal bridges, making it a fully open lantern window. The tricky part is the complex Atlantic coastline on the right side, where small inlets create many convex curves in quick succession: slow down on those curves and let the blade pivot rather than forcing a turn.
I Love Idaho Pumpkin Stencil
Idaho's "I Love ID" stencil follows the familiar two-row grid with a block I and heart on top, and the letters I and D below. The lower I is a simple open rectangle, while the D is a large rounded-rectangle counter that needs its curved interior removed as one piece. Because the D's inner oval is large, make a relief cut at the top before removing to avoid the pumpkin wall flexing and cracking as the piece comes free.
I Love Indiana Pumpkin Stencil
Indiana's "I Love IN" stencil uses the standard two-row grid with block I and heart above, and the letters I and N below in chunky rounded type. The N's two diagonal strokes create a triangular interior space that is left solid rather than cut, so the letter reads as a heavy outline with a solid fill. The carved pumpkin shows the N as a bright outline shape with orange glow around its perimeter and a solid center. Cut the N's two vertical legs first, then the diagonal interior, keeping each stroke short and deliberate to follow the letter's angle accurately.
I Love Kentucky Pumpkin Stencil
Kentucky's "I Love KY" stencil uses the two-row grid with block I and heart above, and the letters K and Y below in rounded block type. The Y's upper two diagonal arms and straight lower stem form a clean open silhouette with no counters, while the K mirrors the structure described for the Kansas stencil. When lit, both bottom letters glow as bright filled shapes. For the Y, make the two upper arm cuts first, meeting at the center junction, then cut straight down the stem to complete the shape cleanly.
I Love North Dakota Pumpkin Stencil
North Dakota's pumpkin stencil delivers the "I [heart] ND" message in bold rounded type across two rows, the heart flanked by a slender "I" above and the letters "ND" below. The "D" is an upright with a large curved lobe on the right, and its wide open interior means you remove a single large piece of pumpkin skin. Score the straight left edge of the "D" first, then cut the curve in one sweeping arc to keep the lobe smooth and symmetrical on the finished jack-o-lantern.
Interwoven Hearts and Leaves
Two large hearts interlock at the center, their outlines woven over and under each other like linked rings, with vine tendrils and autumn leaves flourishing around them. The design is deep relief shading: the background is shaved bright while the woven heart bands stay raised, with no holes pierced. Map the over-under crossings before you carve; keeping the weave consistent is the expert part.
Layered Compass Star Relief
A layered compass-rose mandala: an eight-point star nests inside a larger star, all wrapped in a ring of carved circles and framed by a shaved border medallion. The entire design is relief work at several depths with no pierced openings, which is why it rates expert. Establish the shallowest background layer first, then step each inner layer progressively deeper so the star points read as crisp raised facets.
Moon Profile and One Star
A serene man-in-the-moon profile fills a broad crescent, his closed-eye face, nose, and lips sculpted in layered relief within the shaved moon shape, while a single five-pointed star glows beside him. The moon is carved as continuous-wall shading at multiple depths and only the star area is thinned to shine brightest. This expert piece is all about depth control; rough in the crescent first, then sculpt the facial features gradually, checking the glow with a light as you go.
Pharaoh Death Mask Pumpkin Stencil
An Egyptian pharaoh death mask stares straight out of this expert pumpkin stencil, showing the broad striped nemes headdress with its pleated side panels and forehead uraeus cobra, plus a detailed face with almond-shaped eyes, straight brows, a defined nose, and a zigzag collar at the neck. The face details are held in thin skin bridges while the headdress stripes and surrounding areas are pierced through. Carve the delicate uraeus cobra at the top first since it is the most isolated element and easiest to cut without torque on neighboring sections.
Queen Portrait Pumpkin Stencil
An elderly queen in full regalia looks forward from this pumpkin stencil, her curly hair framing a detailed face with distinct brows, eyes, and lips, topped by an ornate crown bearing a cross, leaf shapes, and decorative elements. The portrait is built from dozens of small and medium cut sections across the hair, face, and jeweled bodice, with thin orange bridges holding the likeness together. Begin with the smallest crown ornament shapes at the very top before moving to the face, since removing the large hair sections early would flex the wall and risk tearing the delicate facial bridges.
Raised Brows and Oval Gasp
An ornamental surprised face: two big eyes striped with vertical bars sit beneath fanned brow lines, above a tall oval gasping mouth ringed by a halo of teardrop cutouts. Every bar, fan line, teardrop, and the central oval is pierced through, and the sheer number of narrow slits is what makes this an expert carve. Cut all the fine slits before the big oval, working outward from the center, so the wall keeps its strength as long as possible.
Rock Singer Pumpkin Stencil
A vintage rock-and-roll singer with a greased pompadour and an open-mouthed grin holds a microphone to his lips on this Halloween pumpkin stencil, his body squared up in a wide stance with legs apart and a guitar strap across the chest. The figure is built from large and medium pierced sections with solid orange bridges defining the face, hair curl, and clothing folds. When lit, the silhouette reads as a golden retro performer mid-song. Cut the face details, including the open mouth and eye lines, before removing the large chest and torso sections that support the surrounding wall.
Skeleton in Bowler Hat Pumpkin Stencil
A cartoon skeleton in a bowler hat tips its hat with one bony hand while its round skull grins with simple triangular nose and dot eyes on this Halloween pumpkin stencil. The ribcage, arm bones, and pelvis are each rendered as small separate cut islands surrounded by pumpkin skin. Because the design is built from many floating cutout islands, carve the larger open bone shapes in the torso before tackling the small finger and toe segments, so the pumpkin stays structurally sound while you work the finer extremities.
Sleeping Moon and Star Scrolls
A serene sleeping crescent moon with a sculpted profile face rests beside a bold five-point star, the pair wrapped in curling scrollwork flourishes and tiny accent stars. Everything is continuous-wall relief, shaved to different depths with no pierced holes, giving it an heirloom carved-wood look. An expert project; keep the moon's facial features shallow and rounded, saving your deepest cuts for the background around the scrolls.
Sombrero Pumpkin Stencil
A wide-brimmed sombrero fills this pumpkin stencil, its high rounded crown pierced as one large cutout and the broad brim divided by a decorative band of repeating V-shaped notches that form a row of open triangles along the lower edge. The hat brim is the negative-space opening, and the triangular notches add festive detail within it. Cut the triangular notches along the band first, from the center outward in each direction, so the thin pumpkin teeth between them remain stable while you remove the larger crown and brim sections.
Turnip Triangle Surprise Face
A nod to the original Irish lanterns: a simple startled face with two triangle eyes and a small arched mouth, designed to suit a turnip, rutabaga, or small pale pumpkin. All three openings cut straight through the wall. Root vegetables are much denser than pumpkins, so hollow the inside generously first and use short, firm saw strokes; on a regular pumpkin this carves in minutes.
Twin Crescent Eyes and Smile
This vintage-style face uses two curved crescent eyes that seem to squint with delight, a small triangle nose, and a broad smile interrupted by one chunky hanging tooth. Every shape cuts fully through the wall, and the pieces are large enough that a keyhole saw handles them easily. Cut the inner curve of each crescent first so the thin points at the tips release cleanly without tearing.
Vermont Pumpkin Stencil
Vermont's narrow, elongated state outline is pierced as a single open shape on this easy pumpkin stencil, showing the slightly irregular wavy eastern border, the smoother western edge along Lake Champlain, and the small northern bump where the Northeast Kingdom juts upward. Lit, it glows as a tall vertical window of light. Because Vermont's outline runs close to the top of a typical pumpkin curve, tape the stencil with the northern bump positioned at least an inch below the stem base to leave enough wall thickness.
Vintage Arches and Round Grin
Arched triple line brows curl above big eyes divided by rind bars, a long triangle nose drops between them, and a huge grin shows a full row of rounded teeth with dotted curlicue accents swirling at each cheek. All the openings are cut through in a cheerful retro style straight off an old holiday postcard. Rated hard for its many small dots and thin brow lines, it rewards a fine detail saw and a drill for the dots.
Winged Heart Pumpkin Stencil
A large heart with feathered wings spread wide anchors this hard pumpkin stencil, with a scrolling banner ribbon below carrying decorative curl accents. The heart is kept solid as pumpkin flesh while the wing feather gaps and banner interior are cut through, creating a tattoo-style composition that glows with intricate layered detail. The individual feather separations along each wing are narrow and numerous; carve them starting at the outermost wingtip and working toward the heart so the wing stays attached to the body of the pumpkin longest.