Sep 14, 2026

Fanged Bat With Raised Wings Pumpkin

A symmetrical bat with a small central face, large round eyes, and deeply notched wings that splay into long pointed finger bones fills this jack-o-lantern in a scary pumpkin carving cutout design. The glowing face oval and wing interiors are pierced through, with dark rind forming the wing bones, ear tips, and the brow line over the eyes. The long wing-finger strips between the notches are fragile, so score the notch cuts before making the outer wing perimeter cut, keeping those thin bridges attached to the pumpkin wall for as long as possible. An orange LED inside warms the wing panels and sharpens the silhouette of each bone against the glow.

This is an AI-generated concept image: a realistic, carvable design idea rather than a photo of a finished carve. AI concepts are always labeled and sit out the leaderboard and the contest.

No ratings yet · Sign in to rate

Medium Animals Scary Classic Cutout

bat animal scary cutout fang spread-wing pointed-wing night

Comments (0)

No comments yet — be the first.

Want to try this?

Want to try this? Here is how you could carve a bat like this at home.

Some experience helps · Cutouts + thin bridges

Read our carving tips

Similar stencils

Browse our spread-wing bat stencils for a matching silhouette.

Tools for this approach

Our suggestions for trying a similar carve. Start with what you already have.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon

A little extra help

Our tips for carving a similar design

The core trick here is a symmetrical bat where the wing panels are cut fully through for bright glow while thin strips of dark rind stay attached to form the finger bones. You build the design around those fragile bridges, scoring the notches first and saving the big openings for last so the pumpkin wall supports everything. A small central face oval reads as the bat's head, with a brow line and ears left as dark skin.

Written by PumpkinCarvingIdeas.com, inspired by the image above. These are our suggestions, not instructions from the uploader. This approach to the AI concept has not been tested on a real pumpkin.

From pumpkin to porch

Prep the pumpkin and pick a flat face
Choose a large pumpkin with a broad, even front so the wings have room to spread. An adult should cut a lid from the bottom or the back rather than the top, which keeps the stem intact and makes the base easy to set over an LED. Scoop the walls on the carving side down to about one inch thick so your blade passes through cleanly. A thinner wall also lets the peeled areas glow.
Transfer the symmetrical stencil
Tape a bat stencil flat against the front, clipping the edges so it hugs the curve without wrinkling. Poke through the outline with a pin or a wheel tool, marking every notch tip, the eye circles, the face oval, and the wing bone lines. Take your time on the symmetry since a bat lives or dies by matching left and right. Peel the paper and connect any faint dots with a washable marker.
Score the wing notches first
Before any full cutout, lightly score along both sides of each long finger bone strip. These thin bridges are the most fragile part, so scoring the notch shapes now defines them while the pumpkin wall still holds everything rigid. Do not push through yet. Working the fine detail before the big holes keeps the wings from flexing and tearing later.
Cut the face and eyes through
With a fine saw blade, cut the central face oval all the way through, then the two round eyes. Keep the brow line and the little fang shapes as uncut or lightly peeled skin so they stay dark against the glow. Cut slowly with the tip and let the blade do the work rather than forcing it. Push waste pieces inward and out to avoid chipping the front edges.
Open the wing panels last
Now cut through the open wing interiors between the finger bones, saving the large outer perimeter cut for the very end. Work from the inner notches outward so each thin bone strip stays supported until its neighbors are done. Leave the wing bones, ear tips, and outer edge as full-thickness rind. If a bridge feels loose, stop and clear waste gently rather than tugging.
Light it and photograph
Set an orange LED inside and warm the wing panels from below, which sharpens each bone against the glow. Rub a little petroleum jelly on the cut edges to slow drying and keep the silhouette crisp. Shoot in low evening light so the pierced areas read bright and the dark rind reads as the bat's frame. A dark backdrop makes the fangs and brow pop.

Gather your supplies

Check things off as you get ready.

Work on a stable surface, keep your free hand out of the cutting path, and have an adult handle sharp tools.

Three levels of light

Leave intact
The wing bones, ear tips, brow line over the eyes, and small fang shapes stay as untouched dark rind.
Peel & shade
Skin-peel the area right around the fangs or brow for a soft dim halo that separates the face from the bright openings.
Cut through
The face oval, the round eyes, and the wing interior panels are cut fully through for the brightest glow.

Learn the carving basics

Before you start cutting

How do I keep the thin wing bones from snapping?

Score the notch outlines before you cut any big openings so the finger bones are defined while the pumpkin wall still braces them. Then open the wing panels from the inner notches outward, leaving each bone supported by its neighbors as long as possible. Clear waste by pushing gently, never yanking, and stop to steady a bridge if it feels loose.

This is a concept image. Can a real pumpkin hold these skinny bones?

Yes, if you keep the bones a bit wider than they look here and the wall around one inch thick. Fatter bridges and full-thickness rind at the ends give the strips the strength to stay attached. Treat the picture as a target and adjust proportions to what your pumpkin can handle.

Where should the light go for the best bat silhouette?

Use an orange LED set low and centered so it fills the wing panels and the face oval from behind. That backlight sharpens each bone into a dark line against the glow. Skip candles since the small pierced openings and thin bones can scorch and dry out fast.