Similar pumpkin stencils
View all stencils →About this stencil
Download the Cartoon Vampire pumpkin stencil as a free printable PDF, then tape the pattern to your pumpkin and trace the lines. A cartoonish chibi-style vampire stands front-facing on this pumpkin stencil, wearing a sweeping cape, a bow tie, and an impish grin showing two prominent fangs. The face details, hands, cape folds, and bow tie are all separate cut-out islands surrounded by solid pumpkin bridges. Start with the smallest interior islands such as the round cheek circles and the bow tie before cutting the large cape sections, so those tiny pieces are supported by a still-intact wall when you trace them. It works as a carving template for a Halloween jack-o'-lantern or a fall porch display. It is rated Advanced. Actual time varies with preparation, pumpkin size and experience. Fine details and narrow supports need careful planning. Follow the cutting and shading key in this design’s PDF.
Pumpkin size guide
- 🎃 Small (5 to 7"): print at 80%
- 🎃 Medium (7 to 10"): print at 100% (recommended)
- 🎃 Large (11 to 13"): print at 130%
- 🎃 Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- Transfer the full stencil with a pin tool and identify all floating island pieces before cutting.
- Punch out the two small circular cheek spots first using a narrow bit or the tip of a detail blade.
- Cut the bow tie and the two small hand shapes next while the face wall is fully rigid.
- Remove the facial feature cutouts: the eyes, grin, and fang gaps, working from smallest to largest.
- Cut the two large cape panel voids, keeping the central body bridge and the arm bridges intact.
- Light with a candle set near center so the grinning face and bat-like cape glow evenly.
Tools you'll need
For a advanced carve like this you'll want a fine-detail pumpkin saw, spoon / scoop, pin transfer tool, and small gouge if the pattern includes shading. Here's the kit we reach for, but start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
AdvancedCaped Dracula Pumpkin Stencil
A cartoonish Dracula figure stands arms raised and cape spread wide in this hard pumpkin stencil, with pointed ears, a brow furrowed in menace, two prominent fangs, and clawed hands at the tips of the outstretched arms. The head, torso, and cape folds are rendered as separate cut-through pieces held together by solid pumpkin outlines, so the finished jack-o-lantern reads as a sharp, angular vampire silhouette when backlit. Cut the claw tips at each arm end first since they are the most isolated and will be hardest to control once the large cape areas are removed.
AdvancedThe Dapper Count Pumpkin Stencil
A vampire face shown from the shoulders up dominates this hard pumpkin stencil, featuring a high widow's peak hairline with two swept horns of hair, large pointed ears, a monocle over one eye, a hawkish nose, a thin mustache, and a jagged collar below the chin. Each facial feature is a separate cut-through piece held apart by solid pumpkin lines, so when lit the face reads as a patchwork of glowing angular shapes. The monocle circle is the most isolated piece; carve it first before the eye socket cuts nearby remove the surrounding support.
AdvancedDracula's Prize Pumpkin Stencil
A bald, hollow-cheeked Dracula figure holds a grinning carved jack-o-lantern to his chest in this hard vampire pumpkin stencil. The face has arching brow ridges, deeply cut cheekbones, fang-edged lips, and small pointed ear nubs. Below the chin the figure's open cape forms a bat-wing shape, and the jack-o-lantern the vampire cradles shows its own triangular eyes and jagged smile as inner cutouts. The composition creates two overlapping scenes: a vampire face above and a glowing pumpkin face below. Work from the outside edge of the cape inward, and carve the inner pumpkin face last to avoid over-thinning the chest wall.
AdvancedVampire Pumpkin Stencil
A snarling vampire face in three-quarter view fills this hard-difficulty pumpkin stencil, with wild flame-like hair, hollow sunken eye sockets, a sharp cheekbone, and an open fang-lined mouth all cut through as negative space. The remaining solid pumpkin flesh forms the angular features of a classic Dracula visage. Lit from behind, the empty eye sockets and open mouth glow fiercely. Carve the eye sockets and mouth interior before tackling the outer hair flames, so the face stays firmly anchored while you work the thin wispy points.
IntermediateVampire Blues Pumpkin Stencil
A stylish vampire plays guitar beneath a crescent moon. Download the two-depth shaded pumpkin stencil with a visual key and detailed scraping guide.
Expert / ProVampire Count Pumpkin Stencil
A vampire count shown from the waist up dominates this expert pumpkin stencil: a swept-back widow's peak hairline, arched expressive brows, sharp angular cheekbones, a sneering half-open mouth, and a high-collared cape spread wide at the bottom. The face is built from many disconnected cut-out islands separated by thin pumpkin bridges, giving the lit design a dramatic stained-glass quality. Before cutting any facial details, map all the bridge lines carefully: the narrow strip between the brow and the cheek is the most fragile connector and must be preserved until the end.