Pumpkin carving templates
572 free printable stencils. Download, print, trace, carve.
176 results · Page 4 of 5
Opossum Pumpkin Stencil
A cartoon opossum crouches in profile across this hard-difficulty pumpkin stencil, its oversized round eyes and small pupils peering out, tall rounded ears pricked up, a plump body with scruffy fur texture, and tiny clawed feet extending below. The large dark body mass is carved away while the ring-shaped eye outlines and a few scattered fur marks stay solid, creating a bold silhouette that reads well even without a light source. Cut the circular eye rings before removing any surrounding flesh so they keep their structural support.
Palm Trees Pumpkin Stencil
Two palm trees of different heights rise from a shared sandy island base in this pumpkin stencil, the taller centered tree and a shorter leaning tree to the left each sporting fronds with individual leaflet-cut fingers spreading wide at the top. The negative space around the trunks and through the frond fingers is cut away, leaving the trunk outlines and leaflet ribs as solid orange bridges so the whole composition glows as a backlit tropical scene. Cut the individual frond leaflet gaps before removing the larger surrounding background so the frond tips never lose support from the pumpkin skin beneath them.
Paw Print Pumpkin Stencil
A large paw print with one big central pad and four oval toe pads fills the face of this pumpkin stencil, each pad carved as a separate pierced cutout surrounded by solid orange wall. Lit from inside, the glowing ovals float against the dark background and read instantly as a cat or dog track. Cut the four smaller toe pads first while the central pad wall is still fully intact to keep the surrounding skin from flexing and cracking during the trickier large cut.
Peace Sign Pumpkin Stencil
A large peace sign fills the pumpkin face in this easy pumpkin stencil: a bold outer ring interrupted by four gaps, a vertical center bar, and two diagonal lower bars all pierced through, with the spaces between them staying solid. When lit, the candlelight glows through the ring segments and the three bar slots, mapping the familiar peace symbol in orange light. Because the ring has four gaps that nearly isolate four arc sections, cut the two lower arcs last to keep them braced while the upper cuts are made.
Perched Raven Pumpkin Stencil
A perched raven faces slightly upward in this full-body pumpkin stencil, with ruffled neck feathers rendered as jagged white-space cuts, a round dot eye, a short hooked beak, and scaled talons gripping a branch stub at the base. The bird's silhouette stays as solid pumpkin skin while the internal feather texture and eye dot are pierced through, creating a layered glow effect where the cuts read as bright highlights within the dark bird shape. Carve the tiny eye dot and the individual feather slashes before removing the larger body background to keep the piece stable.
Pi 3.14 Pumpkin Stencil
The numerals 3.14, rendered in a bold block typeface, fill this pumpkin stencil from edge to edge, referencing the mathematical constant pi. Each digit is a large, solid cut-out shape: the curved halves of the 3, the rectangular decimal point, and the straight-sided 1 and 4 are all pierced through and blaze with candlelight. Because the counter (enclosed area) of the 3 must be retained as separate floating islands of skin, tape small pieces of orange peel back in place after cutting to hold them, or plan to let them fall free for a fully open look.
Pi Symbol Pumpkin Stencil
A large, calligraphic pi symbol dominates this pumpkin stencil, with a long sweeping horizontal crossbar that curls upward at both ends and two tall descending legs that curve outward at the bottom. The single solid shape is cut entirely out of the pumpkin face as one connected piece, leaving a bold glowing symbol framed by solid orange. The long thin crossbar is the most vulnerable element: cut both legs first to release tension before slicing along the bar from each end toward the center.
Pirate Pumpkin Stencil
A grinning pirate face topped by a tricorn hat is the subject of this hard pumpkin stencil: a skull-and-crossbones badge on the hat brim, a round-brimmed hat spreading wide, a leather eye patch over one eye, a weathered face with deep laugh lines, a broad toothy smile, and a pointed goatee at the chin. The lit design reveals a cheerful swashbuckler portrait full of character. Cut the small skull-and-crossbones elements on the hat first while the surrounding skin is firm, then work down through the face, saving the wide hat brim last.
Playful Puppy Pumpkin Stencil
A playful puppy silhouette in a classic play-bow pose, with its rump raised, front paws stretched forward, tail curling up, and round head tilted down, is carved as a single solid cut-through shape. The whole dog reads as one open void so it blazes brightly against the uncut pumpkin surface. Because the tail curls away from the body and connects only at a narrow point near the haunches, cut the tail last after the main body is out to avoid accidentally snapping the thin bridge.
Police Badge Pumpkin Stencil
A five-pointed star with a horizontal banner across its center spelling out POLICE in block capital letters makes up this pumpkin stencil, styled after a classic law-enforcement badge. The interior of the star points and the letter counters are cut through, while the banner background and star outline remain as solid skin. The enclosed center of the letter O is the trickiest piece: slice around it last and press a toothpick through the back of the pumpkin wall to pin the small oval disc in place.
Political Caricature Pumpkin Stencil
A caricature portrait of a suited male figure dominates this pumpkin stencil: the subject has distinctive swept-back hair, heavy open-mouthed expression, a pointing raised finger on one hand and a fist on the other, rendered in sweeping negative-space cuts against a solid silhouette. The broad facial features, jacket lapels, and hand details are all cut through, reading as bright shapes when the jack-o-lantern is lit. Cut the fine hair and facial detail lines first while the overall shape is still rigid, then remove the larger background areas last.
Princess Pumpkin Stencil
A cartoon princess stands front-facing on this pumpkin stencil, wearing a three-paneled ballgown, a crown at the top of her head, and wavy hair falling to her shoulders. Small pierced shapes define her eyes, rosy cheeks, and smile, while the gown panels and arms are formed by narrow white-space divisions in the solid orange wall. When lit, the princess glows as a warm silhouette with delicate facial details. Cut the tiny eye and cheek shapes first with a detail blade before removing any of the larger body sections.
Pug Pumpkin Stencil
A grinning pug puppy sits upright in this detailed pumpkin stencil, its flat wrinkled muzzle, round cheek circles, floppy ears, curled tail, and stubby paws all rendered in interlocking cut shapes. The pug's body is largely solid orange pumpkin skin held together by thin bridges between cut sections, so the face details and surrounding silhouette glow from behind. Carve the two circular eye areas and the small nose last to avoid weakening the bridges around the mouth before the outer body is complete.
Puking Jack-o-Lantern Pumpkin Stencil
This Halloween pumpkin stencil shows a scowling jack-o-lantern face above a wide open mouth with a round bowl shape inside, from which a blob of chunky dripping gunk spills downward in an irregular mass. Narrow slash-shaped eyes and angular brow lines above the mouth convey disgust, while the dripping mass below is a single large pierced area with ragged edges. Cut the small eye and brow slashes first, then tackle the wide drip outline last, since it spans most of the lower pumpkin and removing it early would destabilize the wall for the detail work above.
Queen Portrait Pumpkin Stencil
An elderly queen in full regalia looks forward from this pumpkin stencil, her curly hair framing a detailed face with distinct brows, eyes, and lips, topped by an ornate crown bearing a cross, leaf shapes, and decorative elements. The portrait is built from dozens of small and medium cut sections across the hair, face, and jeweled bodice, with thin orange bridges holding the likeness together. Begin with the smallest crown ornament shapes at the very top before moving to the face, since removing the large hair sections early would flex the wall and risk tearing the delicate facial bridges.
Rainbow and Clouds Pumpkin Stencil
This pumpkin stencil features a rainbow of four concentric arcs rising above two puffy clouds, with scattered stars and small circles floating around the composition. The clouds and stars are separate pierced cutouts, and the arc bands are cut through with thin solid bridges between them, creating a whimsical scene that glows warmly from a candle or LED inside. Cut the small stars and round circles first while the wall is firm, then remove the cloud shapes, and finish with the long sweeping arc cuts so the composition stays supported throughout.
Rainbow Arch Pumpkin Stencil
Five concentric rainbow arcs are centered on this pumpkin stencil, each band separated by a narrow uncut strip so the finished jack-o-lantern glows with layers of orange between bands of dark. The arcs are wide and smoothly curved, making every cut a long gentle sweep with no tight corners. To keep all five bands from sagging after carving, work from the innermost arc outward so the outer wall stays thick and supportive while you remove each layer.
Rat and Moon Pumpkin Stencil
A large aggressive rat crouches in front of a semicircular moon arch in this pumpkin stencil, its shaggy fur rendered in dozens of fine radiating cut lines while the long serrated tail curves up behind it. Small star-burst marks scatter near the snout. The moon background is the main large negative-space cut-out, while the rat body itself is an intricate network of fur-line slots with solid orange between them. Cut the moon arch first as a single clean sweep, then work the fur lines from the rat's back inward toward the belly.
Rat Pumpkin Stencil
A rat rearing up on its hind legs fills this Halloween pumpkin stencil, its long curved tail sweeping to one side and multiple whiskers fanning from both sides of the snout. The body is largely solid orange pumpkin skin framed by a pierced silhouette, so candlelight outlines the creature's claws and ragged chest fur in warm amber. Cut the whisker lines early while the stencil is anchored: there are three to four per side, so work from the snout outward on each side before opening the larger body area.
Rock Singer Pumpkin Stencil
A vintage rock-and-roll singer with a greased pompadour and an open-mouthed grin holds a microphone to his lips on this Halloween pumpkin stencil, his body squared up in a wide stance with legs apart and a guitar strap across the chest. The figure is built from large and medium pierced sections with solid orange bridges defining the face, hair curl, and clothing folds. When lit, the silhouette reads as a golden retro performer mid-song. Cut the face details, including the open mouth and eye lines, before removing the large chest and torso sections that support the surrounding wall.
Rocket and Stars Pumpkin Stencil
A retro rocket ship blasting diagonally upward through a field of five-pointed stars fills this easy pumpkin stencil. The rocket body is a large solid pierce-through with a small circular porthole cut from its center, and two swept fins angle beneath it; six stars of varying sizes are scattered across the field. Lit from within, the rocket and stars all glow as bright cut-out shapes. Cut the small circular porthole in the rocket body before removing the rocket silhouette itself, since that circle is far easier to score cleanly while the surrounding wall has full support.
Scary Clown Pumpkin Stencil
A snarling clown jack-o-lantern face fills this hard-level pumpkin stencil, with wild flame-like tufts of hair radiating from both sides, a menacing brow ridge, swirling round eyes with small pupils, and a wide mouth packed with jagged triangular teeth. The dense ring of hair pieces are cut through while the circular eye centers and curved nose remain as solid orange bridges. Cut the central face shapes first, then work outward to the individual hair flames so each spike stays supported until the very end.
Scary Text Pumpkin Stencil
The word "Scary" is rendered in a dripping, horror-movie hand lettering style and set inside a speech bubble outline made of jagged, claw-like strokes in this hard pumpkin stencil. The letter forms themselves are cut through while the speech bubble border stays solid, so candlelight glows through the word while the ragged bubble outline frames it in orange. The thin descenders on the letters, particularly the tail of the "y" and the base of the "S," are the most fragile bridges; cut those last after the letter interiors are already free.
Screaming Face Pumpkin Stencil
A screaming man's face, rendered with wild tufted hair radiating outward in jagged spikes, fills this expert-level pumpkin stencil. The wide open mouth, squinting brow, and deeply shadowed cheeks are built from interlocking curved cut-through shapes separated by thin orange bridges that define the facial planes. The radiating hair spikes are particularly slender at their tips. Work the hair tips first with a narrow blade, then carve the facial features from the forehead down, saving the large mouth cavity for last so it doesn't weaken the surrounding wall prematurely.
Sea Monster Pumpkin Stencil
A stylized deep-sea creature face stares from this pumpkin stencil, its triangular hooded head framing two bulbous, tentacle-ringed eyes and a beaked mouth below, with two sets of curved claw-like appendages at the bottom. The large triangular head opening is the primary cut-out that floods the design with candlelight, while the eyes with their frilled tentacle edges remain as detailed solid islands within it. Carve the eye tentacle frills with a fine blade before opening the surrounding triangle, so those delicate projections have wall support behind them.
Sea Urchin Pumpkin Stencil
A stylized sea-urchin or crown-of-thorns creature gazes out from this hard-level pumpkin stencil, with five rows of triangular spines radiating above a cute wide-eyed face: two large round eyes accented by lash-like lines, two nostril dots, a small open mouth, and curved tentacle arms spreading at the bottom. Each triangular spine and the large rectangular tooth shapes are cut away so candlelight shoots upward through the spines while the eyes and mouth glow below. Pierce the tiny nostril dots and lash-line cuts first while the face is still fully rigid.
Siberian Husky Pumpkin Stencil
A Siberian Husky portrait faces three-quarters left: the triangular ears with small interior cuts, the characteristic facial mask rendered as a series of floating light-and-shadow shapes, and the ruff of the collar all break the face into layered islands of pumpkin skin. The large negative circle framing the head creates a medallion effect when lit, and the mask shapes inside glow as warm orange ridges against the dark background. Work from the smallest inner facial shapes outward, leaving the outer framing arc until last so the structure stays rigid while the details are cut.
Silly Ghost Pumpkin Stencil
Two mismatched swirly ghost eyes sit above a drooping, blobby mouth on this easy Halloween pumpkin stencil, all three shapes floating as separate cut-outs that suggest a goofy, startled expression. The eyes are different sizes, one comma-shaped and one crescent, giving the face an off-kilter cartoon charm. Since the three pieces are not connected, tape the stencil very flat and cut the smaller eye first, then the larger eye, leaving the wide mouth cutout for last so the pumpkin stays rigid while you work the tighter shapes.
Sinister Eyes Pumpkin Stencil
A pair of intensely glaring eyes fills this expert pumpkin stencil in a wide horizontal composition, with deeply furrowed brows, sharp inner-eye detail, and swirling flame-like linework around the eye sockets all rendered as intricate pierce cuts. The result when lit is a wall of illuminated eyes and chaotic energy that stretches across the pumpkin's face. Carve the small inner-eye iris details and fine flame points before opening the large eye-cavity cutouts, since those large voids will flex the pumpkin wall and make the remaining fine work harder to control.
Sitting Bunny Pumpkin Stencil
A plump, sitting rabbit faces left in clean silhouette for this beginner-friendly pumpkin stencil, with two tall ears, a rounded body, and chunky hind feet all carved as a single open shape. The entire figure is pierced through, so the warm glow of a candle outlines the bunny against the night. Because the ears are connected only at the base, cut them last to avoid accidentally snapping the narrow junction before the rest of the design is secure.
Skeleton Ghost Pumpkin Stencil
A skeletal ghost charges forward with clawed hands outstretched, its skull face showing hollow eyes and a jagged open mouth, the lower body dissolving into flowing tattered shroud wisps in this hard pumpkin stencil. The cut pieces include the eye and mouth openings in the skull, the gaps between the outstretched claw fingers, and several large void areas within the billowing shroud body. The thin strips between the claw fingers are fragile; cut each finger gap fully before moving to the large shroud openings below.
Skeleton Guitarist Pumpkin Stencil
A Day of the Dead skeleton musician stands full-body on this expert pumpkin stencil, wearing a wide-brimmed sombrero and playing a guitar: the skull face shows simple round eyes and a stitched nose, the ribcage is rendered as horizontal bone-slat cut-outs on the torso, the guitar strings are five parallel pierced lines, and the bony legs end in boots. The five guitar strings are the most fragile element, each a thin channel of open space; carve them last with a very sharp narrow blade in single straight strokes, and support the surrounding pumpkin skin with one finger while cutting.
Skeleton Hands Heart Pumpkin Stencil
Two skeletal hands with knuckle-ridge cuts reach upward and inward to frame a heart shape in the negative space between them in this hard-level pumpkin stencil, each finger outlined by rows of small rectangular cut-outs that read as bone segments when lit. The spaces around and between the fingers are cut away so the glowing pumpkin shows the hands as a warm orange lattice of bone detail around the central heart void. Cut the small rectangular knuckle cuts across all fingers before removing the larger surrounding background so every finger stays rigid while you work the fine detail.
Skeleton in Bowler Hat Pumpkin Stencil
A cartoon skeleton in a bowler hat tips its hat with one bony hand while its round skull grins with simple triangular nose and dot eyes on this Halloween pumpkin stencil. The ribcage, arm bones, and pelvis are each rendered as small separate cut islands surrounded by pumpkin skin. Because the design is built from many floating cutout islands, carve the larger open bone shapes in the torso before tackling the small finger and toe segments, so the pumpkin stays structurally sound while you work the finer extremities.
Skeleton with Wine Glass Pumpkin Stencil
A comical full-body skeleton stands upright in this pumpkin stencil, one hand raised with wispy steam rising from it and the other arm holding a wine glass, its cartoonishly large round skull grinning with exaggerated round eyes and a tiny circular nose. The torso shows a rib cage of horizontal bars, and the pelvis, legs, and clawed feet extend below in a loose stick-figure arrangement. Carve the wine-glass outline and the tiny nose circle first, as both are small isolated shapes that benefit from the surrounding wall being intact before you open the larger rib cage and body cavities.
Skull Face Pumpkin Stencil
Two large angular eyes with curling inner-corner details and cocked brows form the upper half of this skull pumpkin stencil, with a small paired nasal cavity below and a wide clenched-teeth mouth at the bottom, all cuts floating separately on an otherwise solid pumpkin face. When lit, the glowing eyes and jagged teeth give the jack-o-lantern an intensely menacing expression. Cut the thin curling details inside each eye first, while the pumpkin is still rigid, then open the eye sockets, nasal holes, and wide tooth row in that order to keep the face from flexing during fine work.