Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
54 results · Page 1 of 2
Angled Eyes and Seven Fangs
Two sharply slanted triangle eyes glare above a wide jagged mouth lined with seven pointed fangs, giving this face a classic menacing snarl. Every element is cut fully through, and the zigzag mouth does most of the work, so accuracy there pays off. Cut each tooth as two separate straight strokes meeting at the point instead of dragging the saw around the corner, and the grin stays razor sharp.
Angry Eyes and Slanted Brows
Two fierce glowing eyes under sharply slanted brows, and nothing else. The eye shapes are cut clean through while the rest of the pumpkin stays untouched, so all the menace comes from those two narrow slits of light. The thin points where each brow meets the eye are the only tricky part; cut toward the wide end of each shape so the tips stay crisp. A fast, dramatic carve when time is short.
Angry Sawtooth Grin
A fierce take on the traditional jack-o'-lantern, this design pairs sharply slanted triangle eyes with a long sawtooth mouth that zigzags across the lower face. Both eyes and the jagged grin are pierced completely through the wall so the whole snarl blazes with candlelight. The narrow zigzag points make this a medium carve; cut each tooth with short strokes toward the point so the tips stay crisp instead of snapping off.
Angular Mask and Eight Slits
This menacing bony mask glares through huge slanted eye sockets, flares a split skeletal nose, and bares a wall of long vertical teeth framed by curved fangs at each corner, with angular temple slashes radiating from the sides. The sockets, nostrils, tooth gaps, and slash marks are all cut through, leaving thin ribs of skin as the teeth. Hard-level advice: carve the eight narrow tooth slits with a fine blade and leave the outer fangs until the very end.
Barred Eyes and Four Fangs
Slanted, sinister eyes are crossed by narrow uncut bars that read like glaring pupils, while the sneering mouth bares pointed fangs above and below the grin. The face is all pierced openings, and those slim bridges across the eyes are the make-or-break detail. Cut each eye in sections around its bar rather than in one pass, and save the fang notches for last so the thin points do not snap while you work.
Barred Eyes and Serrated Grin
This wicked traditional face stacks barred triangle eyes with heavy slanted brows above a huge serrated grin, then flanks the mouth with rows of small wedge and diamond accents across both cheeks. Everything is cut through, and the eye bars are thin strips of shell left inside each triangle. Cut on both sides of each eye bar before removing the surrounding pieces, and save the tiny cheek diamonds for last.
Clenched Eighteen Window Grin
Furrowed slash brows press down on angry eyes with squared pupil tabs, over a flat nose, cheek slits, and a wide clenched mouth divided into a grid of glowing tooth windows. Every window is pierced through, and the lattice of rind strips between them is the hard part. Cut the small mouth openings one at a time, alternating sides, so the grid never carries stress from a half finished row.
Crouching Devil with Trident Pumpkin Stencil
A stocky cartoon devil crouches in a lunging pose, holding a trident horizontally across his body while lightning bolts crackle at his feet. Horns, pointed ears, and a wide-toothed grin are all rendered in open cutouts, and the overall figure is surrounded by enough white space to read crisply as a lit jack-o-lantern. The three prongs of the trident sit very close together, so cut the two narrow gaps between them with a thin detail blade before removing the larger body sections to keep the surrounding pumpkin from flexing.
Curved Horns and Barred Eyes
Two curved horns rise from the crown while fierce slanted eyes, each split by a solid bar of rind, glare above a jagged toothy grin. The horns, eyes, nose, and mouth are all pierced through, with the eye bars and pointed teeth left as uncut bridges. On this medium carve, do the eye interiors in two halves around each bar so the thin strip never bends.
Curved Horns and Diamond Chin
A devilish face with two curved horns sprouting from the brow, narrow slanted eyes glaring beneath them, a wide grin studded with square teeth, and a diamond goatee stamped under the chin. Every piece is cut through so the whole sinister face burns bright. A medium carve with lots of payoff; cut the horn tips slowly since their curved points are the thinnest cuts, and finish with the easy diamond chin.
Demon Face Pumpkin Stencil
An angry demon jack-o-lantern face glares from this pumpkin stencil, its two sweeping brow-and-eye shapes angled sharply inward above a small curved nose and a wide jagged mouth bristling with pointed fangs. All five elements are cut through individually against the solid pumpkin face. Carve the two large brow-eye pieces before the mouth so the face stays rigid while you navigate the fine inward angles of each brow's inner corner.
Devil Emoji Pumpkin Stencil
A devil emoji face stares from this pumpkin stencil: a broad rounded head with two sharp upright horns and jagged scalp flames forms the outer solid shape, while two pill-shaped furrowed-brow pieces, two oval eye cut-outs, and a downturned mouth arc are all pierced through the face below. The large open face area between the feature cuts lets candlelight spill broadly across the design. Cut the small eyebrow ovals first since they sit closest to the top of the face and are easiest to control before the surrounding area is opened.
Devil Girl Pumpkin Stencil
A pin-up devil girl stencil shows a feminine face with two swept horns, one winking eye with full lashes, a smirking open mouth, crossed arms, and a small arrow-tipped tail curling up at the left side. The face features are rendered as solid islands floating within the larger pierced body and hair shapes. Carve the large hair and body outlines first to establish structure, then work inward to the eye and mouth detail; the tiny winking-eye slit is the most fragile cut and should be saved for last.
Devil in Flames Pumpkin Stencil
A snarling devil or demon figure dissolves into horizontal flame streaks in this expert pumpkin stencil, the upper body and bared-teeth face rendered in dense interlocking cuts while dozens of thin parallel flame lines trail outward to the right, tapering to points. Lit from inside, the flames read as a cascading burst of light across the pumpkin surface. Cut the face details first, then work along the flame lines from the body toward the outermost tips, always cutting from the thick base of each flame toward its thin pointed end.
Devil with Trident Pumpkin Stencil
A cartoon devil character stands full-body, holding a trident in one hand and sporting a curled pointed tail behind it, with two horns curving above its round head, arched eyebrows, stubby fang teeth, and small cloven-hoof feet visible below its tunic. The scattered cut pieces, including the trident tines, horns, and eyebrow slots, are separated by solid pumpkin bridges that outline each body part clearly when the jack-o-lantern is lit. Cut the three narrow trident tines first since they sit away from the body and are easiest to control while the surrounding pumpkin is still rigid.
Double Wrinkles and Fang Grin
Deeply wrinkled brows curl over narrowed eyes with rooted pupil tabs, a flared nose snarls in the middle, and a wide fanged grin full of jagged teeth completes this genuinely sinister face, flanked by small diamond cutouts at each temple. Everything is pierced through, and the layered brow wrinkles are why it rates hard. Cut the thin wrinkle slits with a fine-detail saw before the larger eye and mouth openings weaken the surrounding wall.
Double Zigzag Flame Face
Jagged flame-shaped eyes glare above a huge zigzag grin packed with two rows of interlocking pointed teeth. Every eye, brow flick, and tooth gap is pierced clean through, leaving thin orange spikes of rind that read as fangs when the candle is lit. Those narrow tooth points are fragile, so cut them last, work from the tips inward, and support each spike with your free hand as you finish.
Evil Clown Pumpkin Stencil
A sinister clown face with tall horn-like hair spikes, hollow cheekbone arches, a wide gaping smile showing separated teeth, and small spiral eye-corner details makes this hard evil clown pumpkin stencil immediately recognizable. The design is carved almost entirely as negative space, with the face, mouth, and eye areas all open and the narrow skin ridges of the hair spikes and cheek arches defining the character. The two tall hair spikes at the top are the thinnest connected elements, so cut them after all the large face openings are out to keep them from vibrating loose during the heavier cuts.
Evil Rabbit Skull Pumpkin Stencil
A sinister rabbit skull stares from this hard-level pumpkin stencil: the elongated ears flow upward into wild flame-like wisps, and the face is a mask of interlocking oval and rectangular cutouts forming the eye sockets, snout bridge, and a row of small rounded teeth at the bottom. The entire composition is tightly packed with narrow white-line channels separating each island, so the lit jack-o-lantern glows with an intricate dark-rabbit visage. Begin by cutting the row of small round teeth at the base before moving up to the larger eye and snout openings, as the teeth are the most isolated and easiest to free without disturbing surrounding bridges.
Evil Scarecrow Pumpkin Stencil
An oversized evil face fills this scarecrow pumpkin stencil, with heavily arched crescent brows slanting inward over deep-set crescent eyes, a small heart-shaped nose cutout, and a wide grinning mouth lined with dozens of sharp, evenly spaced spike teeth. All facial features are pierced through; the pumpkin skin between them forms the cheeks, brow ridge, and lip edges. Begin with the eyebrow slashes, then the eyes, saving the spike-tooth mouth for last because those narrow points snap easily if the wall has already been weakened.
Fanged Evil Clown Pumpkin Stencil
Jagged wing-like eyes arch above a massive serrated grin packed with long, irregular fangs on this evil clown jack-o-lantern pumpkin stencil. Both eye pieces and the mouth arc are fully cut through, leaving a small heart-shaped nose sliver as the only solid detail inside the grin. The thin points of each fang are the most fragile elements: carve the broad base of the mouth opening first, then carefully nibble out each fang tip from base to point to avoid snapping them off.
Flame Crown and Hooked Eyes
Hooked, furious eyes glare beneath a crown of flame-shaped cutouts that climb the pumpkin's forehead, while a jagged mouth bristles with rows of interlocking fangs and a diamond nose burns at the center. Nearly a hundred small pierced shapes surround the face, so this is a marathon of careful knife work. Cut from the center outward and rest often; the narrow skin bridges between flames and fangs cannot take rushed strokes.
Flaming Devil Pumpkin Stencil
A muscular devil figure with curved horns and a snarling face is wreathed in jagged flame tongues that radiate outward from his body. The stencil uses large pierced areas for the flames and the open silhouette around his torso, while thin solid bridges define the horns, facial features, and the clawed hands. When lit, the jack-o-lantern blazes with a crescent of fire around a dark demonic form. Cut the outer flame spikes first so the central figure stays anchored while you work.
Furious Eyes and Diamond Mask
A ferocious mask of a face with slanted furious eyes, a flared nose, and a jagged mouth full of interlocking fangs, all framed by dense rows of diamond and wedge cutouts that cover the cheeks and brow like scales. Every diamond, wedge, and fang is pierced through, turning the whole front into a lattice of fire. This expert pattern demands order: carve from the center outward so surrounding cuts never weaken your working area.
Hanging Pupils and Eight Bays
An elaborate theatrical face with knowing eyes whose pupils hang from the upper lids, framed by ornate teardrop flourishes across the brow and temples, above a huge grin packed with long individual teeth. Dozens of small cut-through openings build the pattern, with slim rind bridges holding every tooth and swirl in place. Number your openings and remove the smallest flourishes first, saving the big mouth bays for last so the web of bridges keeps its strength.
Heavy Brows and Stitched Smile
Sharp slanted eyes glare from under heavy brows above a narrow triangle nose and a long menacing grin lined with thin vertical teeth. The eyes, nose, and mouth are cut through, and the row of skinny tooth bridges is what earns the hard rating. Cut the mouth outline first, then remove the gaps between teeth one at a time so the fragile strips never take sideways pressure.
Horned Demon Face Pumpkin Stencil
A demon face stares out from this expert pumpkin stencil, its two curved ram-like horns sweeping upward and outward, wild hair radiating from the sides, a bearded chin, and glaring deeply set eyes framed by heavy brow lines. Wing-like shoulder shapes flare wide at either side. The dense interlocking cuts form dozens of small glowing slivers around the retained face features, which remain as solid orange skin. Carve the narrow hair fringe pieces on each side first to release the outer sections, then work inward toward the eyes and beard.
Horned Devil Face Pumpkin Stencil
A snarling horned devil face bursts outward in this expert pumpkin stencil, its deeply detailed visage surrounded by wild flame-like hair, pointed ears, and curling scroll accents, while the eyes, nostrils, and sneering mouth with individual teeth are all cut through as fine interior negative spaces. Dozens of flame-fringe cuts radiate from the outer edge, creating a dense, fiery halo effect when lit. Work from the center face features outward toward the flame fringe, so the most delicate outer tips are cut last when you have the steadiest control.
Imp Face Pumpkin Stencil
A front-facing imp face fills this hard pumpkin stencil with layered detail: two curved horns at the top, heavy arched brow pieces over wide flame-shaped eyes, pointed ear flares on each side, a snarling open mouth with jagged teeth, and a chin medallion with a forked tip. The design reads as mostly open negative space on the pumpkin, with the narrow brow bridges and the gaps between each tooth being the most fragile elements. Carve the teeth last and use a very sharp detail blade to keep each pointed gap clean without breaking the thin skin separating them.
Leering Eyes and Crooked Nose
Slanted leering eyes with attached round pupils glare above a crooked off-center nose and a jagged sneer packed with pointed fangs, while scattered diamond scars glint across both cheeks. The eyes, nose, mouth, and diamonds are pierced with pupils and fang points left as shell. The hard part is the web of narrow fangs; cut each tooth gap from tip to base and never twist the blade mid-cut.
Little Devil Pumpkin Stencil
A small cartoonish devil figure with horn nubs, a pointed tail, and a three-pronged trident stands with a mischievous grin on this devil pumpkin stencil, the body and limbs carved as a tight cluster of connected cutouts. The trident tines and the arrowhead tail tip are the narrowest elements in the design. Carve those thin trident prongs and the pointed tail tip before cutting the larger body void, as opening the chest area too early weakens the wall near those delicate outer points.
Mean Skull Pumpkin Stencil
Two large angled triangular eyes slash across the upper face of this jack-o-lantern stencil, pointing sharply inward to give the skull an aggressive, furrowed scowl. Below, two narrow rectangular fang-tips drop from the center, and a wide jagged mouth with three upward-pointing teeth stretches across the bottom. All six shapes are cut through individually, leaving solid orange between them to hold the face together. The small central fang-tips are easy to snap, so cut each one from the outer corner inward and avoid side pressure on the blade.
Monster Tree Pumpkin Stencil
A menacing anthropomorphic tree creature with clawed outstretched arms, a roaring jagged-toothed mouth, and swirling branch-tentacle hair stands silhouetted inside a large circular moon in this expert pumpkin stencil. The entire moon disc interior is cut away and glows with light, while the creature silhouette and the area outside the moon ring remain as solid pumpkin skin. The swirling hair tendrils at the top create the finest detail against the glowing backdrop. Cut those wispy curling tips before clearing the large moon interior, to avoid cracking the delicate spiral ends once the surrounding wall is weakened.
Narrow Eyes and Barbed Smile
A sinister jack-o'-lantern face with hooked, narrowed eyes, a small heart-shaped nose, and an enormous crescent smile lined with dozens of needle-thin barbed teeth. The eyes, nose, and grin are cut through, and the tiny spikes along the smile are what push this into hard territory. Carve the long crescent first, then nick each barb outward from the opening with a fine blade so the delicate points do not tear.
Scary Clown Pumpkin Stencil
A snarling clown jack-o-lantern face fills this hard-level pumpkin stencil, with wild flame-like tufts of hair radiating from both sides, a menacing brow ridge, swirling round eyes with small pupils, and a wide mouth packed with jagged triangular teeth. The dense ring of hair pieces are cut through while the circular eye centers and curved nose remain as solid orange bridges. Cut the central face shapes first, then work outward to the individual hair flames so each spike stays supported until the very end.
See-No-Evil Monkey Pumpkin Stencil
The see-no-evil monkey emoji is rendered as a wide face with two large hands pressed over the eyes and two banana-shaped ears flaring out, with a broad smile, round nose dots, and small cheek details visible below the hands in this hard pumpkin stencil. The overlapping hand fingers create a dense grid of narrow cut channels across the upper half of the design. Work the individual finger slots from the center outward so each completed cut is braced by uncut pumpkin on at least one side.