Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
64 results · Page 1 of 2
Anxious Round-Pupil Frown
A hilariously worried pumpkin face with two big round eyes topped by drooping eyebrow arcs and a deep upside-down frown. Each feature is a pierced opening, and the round pupils stay attached as tabs inside the glowing eyes to give it that anxious stare. At medium difficulty the pupil bridges are the key detail; cut toward each tab rather than away so you do not snap them off.
Avocado Face Pumpkin Stencil
An avocado half shown face-on has been given a funny mustachioed face: two swirled C-shaped eyes with circular pupils above, a double-curve mustache beneath them, and the large round pit as a center circle below the face. The outer pear-shape of the avocado is defined by two curved parallel lines (the skin edge), and the pit and face elements are all pierced through while the skin-line borders remain solid. Lit from within, the pit glows as the brightest element and the curly mustache reads as a warm squiggle above it. Carve the small circular mustache curves before removing the large pit circle, since the pit's large opening would otherwise flex the surrounding area.
Barred Cyclops Eye and Teeth
One huge round eye crossed by a vertical skin bar stares out above a stubby grin with two blocky teeth, giving this little cyclops a comically startled expression. The eye and mouth are cut through, with the center bar and both teeth left as standing strips of shell. It is an easy carve suited to smaller pumpkins; cut the eye as two half-circles on either side of the bar instead of one big circle, and the bar will never be at risk.
Barred Eyes and Cheek Tears
A goofy clown face with big round eyes crossed by horizontal rind bars, teardrop shapes dangling from each cheek, a button nose, and a huge grin with three chunky teeth. The eyes, tears, nose, and mouth are all cut through, while the eye bars and teeth stay as attached rind bridges. Those bars make it a medium carve: cut each eye as an upper and lower opening on either side of the bar, supporting the bridge with a finger as you finish the strokes.
Confused Jack-o-Lantern Pumpkin Stencil
A crooked, puzzled face expression built from two unequal eyes and a wide zigzag mouth forms this easy pumpkin stencil. The left eye is a narrow horizontal slit while the right eye is a large irregular quadrilateral, and both sit below a single small tapered eyebrow. The mouth is a long jagged zigzag cut with peaks and valleys of different heights, giving the whole face a bewildered, off-kilter look. When lit, the mismatched eyes and frantic zigzag line are immediately readable across the yard. Cut the zigzag mouth with short, angled plunge cuts at each peak rather than one long sweeping stroke to keep each point crisp.
Crescent Wink and Two Teeth
A playful winking face with one big round open eye, one crescent-shaped winking eye, and a broad open smile showing two square teeth. All the features are simple pierced openings with plenty of solid pumpkin between them, so the face is sturdy and beginner friendly. For this easy carve, cut the large smile first while the wall is strongest, then finish with the crescent wink, angling your blade slightly outward for a clean curve.
Crossed Eyes and Buck Teeth
Huge crossed googly eyes sit under raised brow slots while a gaping oval mouth shows off two goofy buck teeth, with freckle dots on each cheek. The eyes, brows, mouth, and dots are all pierced through, and the dark pupils and teeth are rind left attached inside the openings. Those attached pupils and teeth are the tricky bit; cut around them slowly and leave their connecting bridges generously wide.
Cyclops Eye and Five Teeth
A goofy cyclops with one giant round eye under a curly brow, a small triangle nose, freckle dots on each cheek, and a huge laughing mouth with five stubby teeth. The features are cut through, and the pupil stays in place as an attached tab hanging inside the enormous eye. That pupil bridge is the medium-level test; cut both sides of the tab before freeing the rest of the eye circle.
Dice and a Toppled Pawn
A dice cup tips over spilling three pip-marked dice across the scene while a toppled game pawn lies nearby in a glowing puddle of lantern light. This shading design is carved entirely by shaving the skin: the cup, dice faces, pawn, and spill area are scraped to different depths while the pip dots stay dark as untouched rind. Rated hard, keep each die's edges square with straight guide cuts before shaving so the cubes stay convincing.
Dog Pooping Pumpkin Stencil
A squatting dog caught mid-business is the cheeky subject of this easy pumpkin stencil, showing a broad-shouldered dog in profile with its tail raised, haunches lowered, and a small pile on the ground in front. The main dog silhouette and the small pile are both pierced through as large open cut sections, while the connecting bridge between head and body forms the neck. Cut the small pile shape first to free that isolated section, then carve around the full dog body in one continuous pass for a clean silhouette.
Fishbone Skeleton
A cartoon fish skeleton stretches across the pumpkin, complete with an open-mouthed head, a round eye, a long spine lined with curved rib bones, and a fanned tail. The whole design is skin-shaved rather than pierced, so the pale bones glow softly against the dark rind like an x-ray. For this medium etch, outline the spine first, then shave each rib in one smooth stroke so the curves stay parallel and evenly spaced.
Four Teeth and Notched Tongue
Arched brows curve over squinting eyes while a huge open mouth shows four top teeth and a notched tongue lolling below, with short laugh lines radiating from each cheek. The face is all pierced cuts, and it rates hard because the tongue and teeth stay attached by narrow tabs inside the big mouth opening. Cut the mouth outline first, then carefully notch around the tongue tab last so it does not break free.
Goofy Pupils and Twelve Dots
A freckle-faced goofball with lifted eyebrow cuts, big eyes crossed by full-width pupil tabs, a round nose, twelve freckle dots, and a huge open grin with mismatched teeth. The openings are cut through while the pupil bars, teeth, and surrounding freckle rind stay intact. It rates hard because those wide pupil tabs span the entire eye: cut each eye as separate top and bottom windows, drill the freckles with a small round bit, and save the eyebrows for last.
Goofy Three-Tooth Grin
A lovable goofy face with two big round eyes, a small triangle nose, and a wide smile broken up by three blocky teeth. Every shape is a full cut-through opening, so the eyes, nose, and mouth glow while the rest of the pumpkin stays untouched. It is a great first stencil; start with the smallest tooth cuts before opening the large mouth so the wall stays sturdy.
Left Wink and Six Cheek Wedges
A playful winking jack-o'-lantern: one big round open eye, one arched wink, a triangle nose, and a smiling mouth with blocky teeth, all framed by three thin whisker-like wedges slashed across each cheek. Every opening is cut through, and the six cheek wedges throw extra slivers of light. At medium difficulty, cut the large features first and finish with the skinny cheek slits, using a fine saw so each wedge tapers to a clean point.
Long Pupils and Triangle Grin
A mischievous jester face topped with an arcing crown of small diamond cutouts, tall eyes with long slit pupils, diamond accents on each cheek, and a huge grin lined with pointed triangle teeth. Every diamond, eye, and tooth gap is pierced through, so the whole face sparkles like carnival lights. As an expert pattern full of tiny repeated shapes, cut all the small diamonds first with a narrow saw before opening the large mouth, which weakens the wall.
Long-Necked Cyclops Pumpkin Stencil
A quirky one-eyed long-necked creature with a rounded bird-like body, a spiral cyclops eye, and a jagged toothed mouth stands on two stubby feet in this easy Halloween pumpkin stencil. The body is largely pierced through as a dark void while the eye ring and neck details remain as uncut pumpkin. The thin neck connecting the large head to the body is the most delicate bridge in the design, so carve the body void and the mouth teeth first, then cut around the neck last to keep it from snapping early.
Lopsided Zigzag Grin
A cheerfully lopsided jack-o'-lantern face with one big round eye, one slanted triangle eye, and a wide zigzag grin stretching across the pumpkin. All three features are pierced fully through so candlelight pours out, while the surrounding skin stays untouched. The zigzag mouth is the trickiest part at this medium level, so cut each tooth point in two short strokes that meet at the tip instead of dragging one long sawing pass.
One Eye and Two Upper Teeth
A goofy one-eyed jack-o'-lantern with a huge round eye topped by a dark pupil circle, a small triangle nose, and a wide smile broken by two chunky upper teeth. The big eye, nose, and mouth are cut through, while the pupil area keeps a disc of skin attached at the top for contrast. Support the teeth by cutting away from their narrow roots, since those two tabs carry the whole grin.
One-Eye Arched-Brow Smile
A single giant eye dominates this friendly monster face, with a dark round pupil left in place at its center and a curved brow arched above. Below, a huge grin sweeps ear to ear with pointed dimples at each corner. The eye ring, brow, and smile are cut through while the pupil stays as an island of shell, which is what earns the medium rating; anchor that pupil with a toothpick from behind if it feels loose.
Ostrich & Feathered Rump
A full-body ostrich stands in profile, with its long curved neck, round feathered body, and two lanky legs shaved into the pumpkin skin. Nothing is pierced; you peel away the skin inside the bird so the pale flesh forms a two-tone silhouette against the orange shell. Use a loop tool or vegetable peeler and shave in shallow passes so the thin neck and legs stay even in width.
Puking Jack-o-Lantern Pumpkin Stencil
This Halloween pumpkin stencil shows a scowling jack-o-lantern face above a wide open mouth with a round bowl shape inside, from which a blob of chunky dripping gunk spills downward in an irregular mass. Narrow slash-shaped eyes and angular brow lines above the mouth convey disgust, while the dripping mass below is a single large pierced area with ragged edges. Cut the small eye and brow slashes first, then tackle the wide drip outline last, since it spans most of the lower pumpkin and removing it early would destabilize the wall for the detail work above.
Raised Brows and Four Tears
A theatrically miserable pumpkin with worried brows arched high, drooping oval eyes, four teardrops sliding down the cheeks, and a deep downturned frown showing a hint of teeth. Every brow, eye, tear, and the big frown is cut through so the whole sob story glows. A medium carve that lands the joke best when the tears line up; cut the small teardrops first, then the eyes, saving the wide mouth for the end.
Raised Brows and Oval Surprise
Two wide oval eyes topped with arched eyebrows hover above a tall oval mouth frozen mid-gasp, giving the pumpkin a permanently astonished expression. The eyes, brows, and mouth are all clean cut-through openings with generous spacing between them. Easy carvers should cut the thin eyebrow arcs first while the wall is strongest, then remove the big ovals; angle the knife slightly outward so each plug pops free without bruising the edges.
Right Wink and Eight Freckles
A winking smiley with one open eye, one curved wink swoosh, a big grin holding a single square tooth, and a cluster of four freckle dots on each cheek. All shapes cut through, and the tiny freckles are what nudge this to medium difficulty. Punch the dots with a drill bit or apple corer before sawing the larger openings, since small circles are far easier while the wall is intact.
Round and Square Eyes
A goofy lopsided face with one big round eye and one square eye, a small triangle nose, and a huge open smile interrupted by two buck teeth hanging from the upper lip. All shapes are cut fully through, and the mismatched eyes do all the comedic work. An easy, forgiving carve for kids and beginners; cut the smile last and leave the two tooth tabs of rind attached so they dangle into the glow.
Round and Triangle Goofy Eyes
One round eye and one sideways triangle eye give this pumpkin its delightfully goofy, mid-wink expression, finished with a huge upswept smile and two square teeth hanging from the upper lip. All shapes cut straight through for a bright, cartoonish glow. It is an easy crowd-pleaser; cut around each square tooth carefully, since they stay attached to the top of the mouth, and round off the smile's corners for extra charm.
Round-Cheek Two-Tooth Clown
This goofy clown face stacks triangle eyes over a big round nose, two glowing cheek circles, and a wide banana grin with two square buck teeth hanging down. All the openings are simple cut-through shapes with plenty of space between them, which makes it a friendly first carve. Cut the smallest pieces first, the teeth notches, before removing the big mouth so the wall stays sturdy.
Round-Eyed Clown With Brows
A cheerful clown face with raised curving brows, big round eyes, a round button nose, small dot cheeks, and a huge sweeping smile. Every feature is a straightforward cut-through opening, and the little cheek dots on each side add extra sparkle at night. At medium difficulty the challenge is spacing: transfer the stencil carefully so the brows sit clear of the eyes, then drill the small dots with a pumpkin drill or apple corer for perfect circles.
Silly Ghost Pumpkin Stencil
Two mismatched swirly ghost eyes sit above a drooping, blobby mouth on this easy Halloween pumpkin stencil, all three shapes floating as separate cut-outs that suggest a goofy, startled expression. The eyes are different sizes, one comma-shaped and one crescent, giving the face an off-kilter cartoon charm. Since the three pieces are not connected, tape the stencil very flat and cut the smaller eye first, then the larger eye, leaving the wide mouth cutout for last so the pumpkin stays rigid while you work the tighter shapes.
Silly Monster Pumpkin Stencil
A shaggy round monster with a small zigzag hair antenna on top, wide round eyes, a grinning row of rectangular teeth, and two outstretched hands with four or five digits fills this funny pumpkin stencil, with about eight to ten interior pierced slashes representing the fur texture along with the facial features and foot claws. The lit pumpkin reveals the entire creature in warm orange silhouette against a dark background. Cut the large central body void first, then work through each interior fur slash and claw detail, leaving the two floating hand cutouts for last.
Single-Eye Crescent Smile
One big round eye sits above a long crescent smile, giving this jack-o'-lantern a goofy cyclops charm with just two cuts. Both shapes are pierced fully through, and the wide openings make it a forgiving first carve for beginners. Trace the circle in short strokes so it stays round, then cut the smile from the center outward so both tapered corners of the grin match.
Sorrow Brows and Falling Tears
A theatrically miserable face with layered droopy brow wrinkles stacked like ribs above two barred, half-lidded eyes, a long drooping nose, and a deep striped frown, all surrounded by cascading columns of teardrops. Every wrinkle, bar, and tear is cut through, creating an ornate pattern of dozens of small openings. This expert carve is all about sequence: work from the center outward and leave the fragile tear columns at the edges for last.
Split Tooth and Two Sparkles
A giant molar with a split between its two roots gleams at the center, flanked by a four-point sparkle on each side and two small dot accents. The tooth outline is cut through around its lobed crown and twin roots, and the sparkles and dots are pierced as well, making a bright emblem any dentist would love. At medium difficulty, the pinch between the roots is the tightest cut, so saw into that notch from both sides and go slow.
Star Crown and Four Tooth Grin
A crown of small four-point stars sparkles around the top of this face, while two big playful eyes with attached pupil tabs sit over a wide grin lined with little teeth. Everything is cut through, and the pupils survive as tabs rooted to the top of each eye opening. Carve the star crown first while the wall is strongest, then cut each eye around its pupil tab in small strokes so the tabs stay put.
Tall Smile and Six Cheek Dots
A tall pumpkin design with arched happy eyes, an oval nose, three dot freckles on each cheek, and a huge open smile with four little teeth hanging from the top lip. Every shape is cut through, and the six small cheek dots add a sprinkle of glowing freckles around the grin. Punch the freckle dots with an apple corer or drill bit before opening the big mouth.