Pumpkin carving templates
572 free printable stencils. Download, print, trace, carve.
572 results · Page 11 of 16
One-Eyed Horned Monster Pumpkin Stencil
A squat, wide-bodied one-eyed monster fills this hard pumpkin stencil from head to toe: a large circular head that doubles as the body, a single giant eye at center made of three concentric rings with a crescent cut-out pupil, two small curved horns at the top, three-clawed hands on short arms at each side, and a wavy skirt-like bottom hem. The three concentric eye rings are connected by thin skin bridges and are the most fragile element; carve the outermost eye ring first and work inward, letting each ring dry slightly before cutting the next.
One-Eyed Monster Pumpkin Stencil
This one-eyed monster character has a round head ringed with wild hair, a single large circular eye socket, a wide grinning mouth, and a short stubby body with splayed hands and feet. The stencil mixes solid areas (the pupil island inside the eye, the hair fringe, the torso patches) with pierced cutouts for the eye socket, mouth, and body gaps. Lit from inside, the monster's oversized eye glows brightly while the hair and body details form a dark, shaggy border. Keep the small circular island inside the eye intact, losing it turns the design from a recognizable eye into a plain hole.
One-Eyed Monster Pumpkin Stencil
A round one-eyed cartoon monster fills this funny pumpkin stencil, its single large circular eye containing a crescent pupil, a wide toothy grin below, and four spindly stick arms raised overhead, each ending in a three-fingered hand. The monster's body ring and arms are left as pumpkin skin, while the eye surround, mouth opening, and spaces between the fingers are cut through, glowing when lit. Carve the tiny gaps between the finger stubs before tackling the eye ring, since those narrow channels are easiest to control before the surrounding wall is weakened.
One-Eyed Monster Pumpkin Stencil
A quirky one-eyed worm-like creature stands upright in this animals pumpkin stencil: a large circular head with a concentric inner eye ring and a crescent pupil, small antenna nubs around the head rim, a fanged grinning mouth, two tiny three-fingered arms raised at its sides, a long segmented body with ringed markings, and curling feet at the base. The thin connecting lines between head, body, and limb segments are the most fragile parts of this carving. Cut the small finger and toe tips before the body-segment cuts so the creature's extremities have maximum wall support.
Open Rose Bloom Pumpkin Stencil
A fully open rose bloom fills this pumpkin stencil edge to edge, with layered outer petals that taper to pointed tips and a tight spiral center bud defined by two curved cut lines. Most of the design is cut away, leaving the petal-edge outlines and spiral as thin orange pumpkin bridges floating in a large illuminated background. The center spiral is the most fragile element, so trace its two curved cuts first with a sharp fine blade before opening the surrounding petal fields that would otherwise leave it unsupported.
Opossum Pumpkin Stencil
A cartoon opossum crouches in profile across this hard-difficulty pumpkin stencil, its oversized round eyes and small pupils peering out, tall rounded ears pricked up, a plump body with scruffy fur texture, and tiny clawed feet extending below. The large dark body mass is carved away while the ring-shaped eye outlines and a few scattered fur marks stay solid, creating a bold silhouette that reads well even without a light source. Cut the circular eye rings before removing any surrounding flesh so they keep their structural support.
Oregon Pumpkin Stencil
Oregon's outline appears as a chunky roughly rectangular shape with a short notch in the upper-left corner where the Columbia River forms the Washington border, a gently curved coastal edge on the left, and a mostly straight southern border in this easy state pumpkin stencil. The entire interior is cut away as a single open shape so the Beaver State silhouette glows from within. The short upward notch at the upper-left corner is the most distinctive detail, so cut that notch carefully before tracing the longer straight edges so you do not accidentally round it off.
Owl on Moon Pumpkin Stencil
A compact owl perches on a branch inside a full-circle moon background in this hard-level animal pumpkin stencil, the bird shown front-facing with heavy-lidded crescent eyes, a small triangular beak, three rows of curved feather-scale cuts on the belly, and stubby feet gripping the branch below. The circular moon background is cut away all around the owl, leaving the bird as a solid silhouette connected to the outer ring at the branch base, so the owl glows in outline against the bright moon when lit. Cut the circle background in sections while preserving the narrow branch connection at the bottom, which is the only structural link between the owl and the outer ring.
Palm Trees Pumpkin Stencil
Two palm trees of different heights rise from a shared sandy island base in this pumpkin stencil, the taller centered tree and a shorter leaning tree to the left each sporting fronds with individual leaflet-cut fingers spreading wide at the top. The negative space around the trunks and through the frond fingers is cut away, leaving the trunk outlines and leaflet ribs as solid orange bridges so the whole composition glows as a backlit tropical scene. Cut the individual frond leaflet gaps before removing the larger surrounding background so the frond tips never lose support from the pumpkin skin beneath them.
Parasaurolophus Pumpkin Stencil
A cute bipedal Parasaurolophus dinosaur faces right in this hard-level pumpkin stencil, with the signature backward-sweeping cranial crest arching above its round eye, a chunky body sectioned by organic blob-shaped cut-outs along the dorsal ridge and belly, two short front arms with clawed fingers, and sturdy hind legs. The blob-shaped body cut-outs stay open so the dinosaur glows in a spotted pattern when lit, while the outer silhouette stays solid. Cut the small claw details on the fingers before removing the large body sections so the arm area keeps its rigidity while you work.
Paw Print and Bone Pumpkin Stencil
A dog paw print stacked above a classic dog bone forms this two-element dog pumpkin stencil, with the paw showing one main pad and four oval toe pads, and the horizontal bone below featuring two knobbed ends and a straight shaft. Both shapes are carved as separate open silhouettes that glow on the finished jack-o-lantern, the paw sitting centered above the bone with a clear gap of skin between them. Cut the paw toe pads and main pad first, then carve the bone, so any flexing of the pumpkin wall during the lower cut does not disturb the already-removed paw above.
Paw Print Pumpkin Stencil
A large paw print with one big central pad and four oval toe pads fills the face of this pumpkin stencil, each pad carved as a separate pierced cutout surrounded by solid orange wall. Lit from inside, the glowing ovals float against the dark background and read instantly as a cat or dog track. Cut the four smaller toe pads first while the central pad wall is still fully intact to keep the surrounding skin from flexing and cracking during the trickier large cut.
Peace Sign Hand Pumpkin Stencil
A hand making the two-finger peace or victory sign fills this easy emoji pumpkin stencil: two extended fingers spread in a V at the top, a curled fist below them, a small rounded thumb stub at the left, and a rectangular cuff at the wrist base. The spaces around and between the fingers are cut away so the glowing pumpkin shows the hand shape in solid orange with open surrounds. The narrow V-gap between the two raised fingers is the tightest space, so cut that slot in one continuous downward stroke before widening the surrounding areas.
Peace Sign Pumpkin Stencil
A large peace sign fills the pumpkin face in this easy pumpkin stencil: a bold outer ring interrupted by four gaps, a vertical center bar, and two diagonal lower bars all pierced through, with the spaces between them staying solid. When lit, the candlelight glows through the ring segments and the three bar slots, mapping the familiar peace symbol in orange light. Because the ring has four gaps that nearly isolate four arc sections, cut the two lower arcs last to keep them braced while the upper cuts are made.
Pennsylvania Pumpkin Stencil
The outline of Pennsylvania fills this pumpkin stencil as a single large cut-out: the roughly rectangular shape with its notched southwestern corner and jagged northern border traces the Keystone State's recognizable silhouette. Because the entire interior is pierced through as one piece, the jack-o-lantern glows as a bold, dark window of light. Score the long straight bottom edge first to anchor your line before navigating the irregular border.
Perched Raven Pumpkin Stencil
A perched raven faces slightly upward in this full-body pumpkin stencil, with ruffled neck feathers rendered as jagged white-space cuts, a round dot eye, a short hooked beak, and scaled talons gripping a branch stub at the base. The bird's silhouette stays as solid pumpkin skin while the internal feather texture and eye dot are pierced through, creating a layered glow effect where the cuts read as bright highlights within the dark bird shape. Carve the tiny eye dot and the individual feather slashes before removing the larger body background to keep the piece stable.
Pharaoh Death Mask Pumpkin Stencil
An Egyptian pharaoh death mask stares straight out of this expert pumpkin stencil, showing the broad striped nemes headdress with its pleated side panels and forehead uraeus cobra, plus a detailed face with almond-shaped eyes, straight brows, a defined nose, and a zigzag collar at the neck. The face details are held in thin skin bridges while the headdress stripes and surrounding areas are pierced through. Carve the delicate uraeus cobra at the top first since it is the most isolated element and easiest to cut without torque on neighboring sections.
Pi 3.14 Pumpkin Stencil
The numerals 3.14, rendered in a bold block typeface, fill this pumpkin stencil from edge to edge, referencing the mathematical constant pi. Each digit is a large, solid cut-out shape: the curved halves of the 3, the rectangular decimal point, and the straight-sided 1 and 4 are all pierced through and blaze with candlelight. Because the counter (enclosed area) of the 3 must be retained as separate floating islands of skin, tape small pieces of orange peel back in place after cutting to hold them, or plan to let them fall free for a fully open look.
Pi Symbol Pumpkin Stencil
A large, calligraphic pi symbol dominates this pumpkin stencil, with a long sweeping horizontal crossbar that curls upward at both ends and two tall descending legs that curve outward at the bottom. The single solid shape is cut entirely out of the pumpkin face as one connected piece, leaving a bold glowing symbol framed by solid orange. The long thin crossbar is the most vulnerable element: cut both legs first to release tension before slicing along the bar from each end toward the center.
Pirate Pumpkin Stencil
A grinning pirate face topped by a tricorn hat is the subject of this hard pumpkin stencil: a skull-and-crossbones badge on the hat brim, a round-brimmed hat spreading wide, a leather eye patch over one eye, a weathered face with deep laugh lines, a broad toothy smile, and a pointed goatee at the chin. The lit design reveals a cheerful swashbuckler portrait full of character. Cut the small skull-and-crossbones elements on the hat first while the surrounding skin is firm, then work down through the face, saving the wide hat brim last.
Pirate Ship Pumpkin Stencil
A pirate ship viewed broadside fills this expert pirate pumpkin stencil, with a large sail bearing a skull-and-crossbones cutout, a cartoonish pirate figure standing at the bow with a sword, a cannon on the stern deck, and decorative hull porthole hooks below. The design has many small isolated cut pieces, including the skull's eye sockets and crossbones, the cannon barrel, and the pirate's facial features. Carve the skull-and-crossbones details on the sail first, since they sit within a large solid background that holds them firmly while you work the tiny pieces.
Pirate Skull Pumpkin Stencil
A grinning pirate skull wearing a broad tricorn hat dominates this expert-level pumpkin stencil, with a second miniature skull-and-crossbones badge emblazoned on the hat brim. Dense cutwork in the teeth row, eye sockets, and hat badge creates many small isolated pieces held together by narrow bridges of pumpkin flesh. Begin with the tiny crossbone details on the hat badge while your hands are freshest, then move to the eye sockets and finally the toothed lower jaw.
Pirate Skull with Parrot Pumpkin Stencil
A weathered pirate skull in a battered tricorn hat stares out from this expert pumpkin stencil, a parrot perched on the skull's head and tattered coat lapels framing its hollow cheeks. The skull-and-crossbones badge on the hat, individual finger bones along the bottom, and ragged coat edges create dozens of intricate cut sections. Carve the small hat badge first, then the interior face hollows, before moving outward to the flowing coat edges where the thinnest bridges live.
Playful Puppy Pumpkin Stencil
A playful puppy silhouette in a classic play-bow pose, with its rump raised, front paws stretched forward, tail curling up, and round head tilted down, is carved as a single solid cut-through shape. The whole dog reads as one open void so it blazes brightly against the uncut pumpkin surface. Because the tail curls away from the body and connects only at a narrow point near the haunches, cut the tail last after the main body is out to avoid accidentally snapping the thin bridge.
Police Badge Pumpkin Stencil
A five-pointed star with a horizontal banner across its center spelling out POLICE in block capital letters makes up this pumpkin stencil, styled after a classic law-enforcement badge. The interior of the star points and the letter counters are cut through, while the banner background and star outline remain as solid skin. The enclosed center of the letter O is the trickiest piece: slice around it last and press a toothpick through the back of the pumpkin wall to pin the small oval disc in place.
Political Caricature Pumpkin Stencil
A caricature portrait of a suited male figure dominates this pumpkin stencil: the subject has distinctive swept-back hair, heavy open-mouthed expression, a pointing raised finger on one hand and a fist on the other, rendered in sweeping negative-space cuts against a solid silhouette. The broad facial features, jacket lapels, and hand details are all cut through, reading as bright shapes when the jack-o-lantern is lit. Cut the fine hair and facial detail lines first while the overall shape is still rigid, then remove the larger background areas last.
Pomeranian Pumpkin Stencil
A Pomeranian's fluffy face fills this expert pumpkin stencil, with large irregular patch and blob cutouts radiating outward from a central face zone to create the breed's characteristic lion-mane ruff. The eyes, brow ridges, nose, and cheek fur are rendered as interlocking positive and negative shapes, with bold irregular fur sections throughout. Work from the central face outward, carving the eye and nose details first, then tackling the fur patch cutouts in sections to keep maximum support until the outermost edges are reached.
Poop Emoji Pumpkin Stencil
The classic poop emoji, a three-tiered swirl with two crescent eyes and a small curved smile, is rendered as a bold outline stencil in this easy funny pumpkin stencil, with the outer swirl shape and facial features all carved as open channels that leave the interior swirl body as solid glowing pumpkin skin. The two crescent eyes and the smile are the smallest cuts; carve them before outlining the full swirl body so you have a stable surface to press against. A candle inside makes the whole swirl glow warmly with the eyes and smile as darker recesses within the lit shape.
Pride Heart Pumpkin Stencil
A bold heart outline with the word "PRIDE" in wide block letters across its center makes up this easy pumpkin stencil. The heart shape is split horizontally by the text band: the upper heart arch stays solid at the top, the letter counters (the enclosed spaces inside letters like R, D, and I) stay as solid islands, and the large lower heart triangle along with the negative spaces around each letter are pierced through. When lit, the glowing letters read sharply against the dark heart background. Cut the letter interiors first, preserving each letter's counter islands, before removing the large heart body below.
Princess Pumpkin Stencil
A cartoon princess stands front-facing on this pumpkin stencil, wearing a three-paneled ballgown, a crown at the top of her head, and wavy hair falling to her shoulders. Small pierced shapes define her eyes, rosy cheeks, and smile, while the gown panels and arms are formed by narrow white-space divisions in the solid orange wall. When lit, the princess glows as a warm silhouette with delicate facial details. Cut the tiny eye and cheek shapes first with a detail blade before removing any of the larger body sections.
Pug Pumpkin Stencil
A grinning pug puppy sits upright in this detailed pumpkin stencil, its flat wrinkled muzzle, round cheek circles, floppy ears, curled tail, and stubby paws all rendered in interlocking cut shapes. The pug's body is largely solid orange pumpkin skin held together by thin bridges between cut sections, so the face details and surrounding silhouette glow from behind. Carve the two circular eye areas and the small nose last to avoid weakening the bridges around the mouth before the outer body is complete.
Puking Jack-o-Lantern Pumpkin Stencil
This Halloween pumpkin stencil shows a scowling jack-o-lantern face above a wide open mouth with a round bowl shape inside, from which a blob of chunky dripping gunk spills downward in an irregular mass. Narrow slash-shaped eyes and angular brow lines above the mouth convey disgust, while the dripping mass below is a single large pierced area with ragged edges. Cut the small eye and brow slashes first, then tackle the wide drip outline last, since it spans most of the lower pumpkin and removing it early would destabilize the wall for the detail work above.
Pumpkin with Vines Pumpkin Stencil
A jack-o-lantern-within-a-pumpkin stencil showing a grinning carved pumpkin face at the center, surrounded by a flowing arrangement of autumn leaves, curling vines, and a flying bat perched near the stem above. The inner pumpkin face, triangular eyes, jagged mouth, and stem, stays solid orange while the vine-and-leaf background area around it is pierced through to glow. Carve the outer leaf and vine shapes before opening the inner face cuts, so the decorative frame is complete and stable before you work near the center detail.
Queen Portrait Pumpkin Stencil
An elderly queen in full regalia looks forward from this pumpkin stencil, her curly hair framing a detailed face with distinct brows, eyes, and lips, topped by an ornate crown bearing a cross, leaf shapes, and decorative elements. The portrait is built from dozens of small and medium cut sections across the hair, face, and jeweled bodice, with thin orange bridges holding the likeness together. Begin with the smallest crown ornament shapes at the very top before moving to the face, since removing the large hair sections early would flex the wall and risk tearing the delicate facial bridges.
Raccoon Pumpkin Stencil
A raccoon ambling to the right fills this beginner pumpkin stencil with a chunky, rounded body, stubby legs, and a distinctive ringed face featuring the signature black mask rendered as curved cutout shapes around the eyes. A striped banded tail curves up behind the body and is carved as two separate arc shapes above the main silhouette. When lit, the mask rings and tail arcs glow while the body reads as a solid dark silhouette. The two small tail arc pieces are unconnected islands; press the stencil firmly and cut them before removing the larger body sections so they stay anchored.
Rainbow and Clouds Pumpkin Stencil
This pumpkin stencil features a rainbow of four concentric arcs rising above two puffy clouds, with scattered stars and small circles floating around the composition. The clouds and stars are separate pierced cutouts, and the arc bands are cut through with thin solid bridges between them, creating a whimsical scene that glows warmly from a candle or LED inside. Cut the small stars and round circles first while the wall is firm, then remove the cloud shapes, and finish with the long sweeping arc cuts so the composition stays supported throughout.