Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
1155 results · Page 17 of 33
Michigan Pumpkin Stencil
Michigan's Lower Peninsula occupies most of this pumpkin stencil, its mitten-like silhouette instantly recognizable with the distinctive thumb peninsula on the upper right. A small notch at the top indicates where the Upper Peninsula begins, adding geographic accuracy to the outline. The entire shape is carved as a single open cutout, letting candle glow illuminate the full state contour. The thumb peninsula's base is a narrow waist of pumpkin wall, so cut the outer edge of the thumb with a slow controlled stroke before removing the larger lower-peninsula body.
Mini Face with Twin Teeth
Sized for small pumpkins, this friendly face uses two triangle eyes, a tiny triangle nose, and a rectangular mouth with two square teeth notched into the top edge. All openings cut straight through, and the compact layout keeps every feature close together so it reads clearly on a little gourd. On thin-walled mini pumpkins, use a fine serrated blade and light pressure to avoid splitting the shell between cuts.
Minnesota Heart Lettering
The message reads I, a plump heart, then the letters M and N stacked below, spelling out love for Minnesota in chunky serif lettering. Each letter and the heart are cut fully through, so the whole message glows like a hometown marquee. An easy lettering carve; the only care points are the small rind gaps inside the M and N, so cut each letter's openings before freeing its outer edges.
Minnesota Pumpkin Stencil
Minnesota's outline appears in this pumpkin stencil as a broad near-rectangular shape with a small protrusion extending to the upper left for the Northwest Angle and a gentle scalloped northern border that traces the lake-country edge. The entire state silhouette is carved as one open cutout, and the smooth southern and western borders contrast with the more irregular northern and eastern edges. The Northwest Angle nub is a small isolated tip connected by a narrow strip, so cut that corner carefully before removing the main body to prevent it from tearing loose.
Minnesota State Shape
The full outline of Minnesota carved as one glowing state-shaped window, from the flat southern border up to the jagged Arrowhead along Lake Superior. The entire silhouette is cut through in a single piece, leaving the surrounding pumpkin wall to frame it. Take your time on the notched northeast shoreline, sawing gently along each small zigzag, and pop the big piece out in sections rather than all at once.
Mississippi Heart Lettering
This hometown tribute stacks I heart on the top line and MS below in thick block letters, with a plump heart doing the talking. Each letter and the heart are pierced as separate bold shapes with plenty of shell between them, keeping the wall strong. For this easy design, cut the S from the center outward in two hooked passes so its curves stay even, then finish with the heart.
Mississippi Pumpkin Stencil
This pumpkin stencil cuts the outline of Mississippi as a single solid silhouette pierced entirely through the pumpkin wall. The western border is the most distinctive feature: a deeply notched, step-like edge tracing the course of the Mississippi River, while the right side drops in two clean vertical lines. Lit from inside, the whole state shape glows as one open window. Start your cuts along the jagged river edge, working in short strokes to keep each notch crisp.
Mississippi State Shape
Mississippi's tall rectangular profile carved as one bold cutout, complete with the wiggly river border on the west side and the small boot notch at the Gulf. The whole state is removed to glow, and the surrounding rind stays intact as the frame. A medium carve where the river edge does most of the work; saw those little curves slowly and leave the long straight eastern border for your final cut.
Missouri Pumpkin Stencil
Missouri's broad, roughly rectangular shape fills this pumpkin stencil with a satisfying silhouette. The northern edge is nearly flat, the eastern side curves gently, and the lower-right corner sports the distinctive Missouri Bootheel notch with its stepped extensions reaching down and right. Carved through as a single open shape, the state glows cleanly on a lit jack-o-lantern. Carve the squared main body first, then finish the small Bootheel extensions carefully to avoid snapping those narrow protrusions.
Missouri State Shape
The unmistakable outline of Missouri, complete with its bootheel corner, carved as one large glowing state silhouette. The entire state shape is cut fully through the wall, so the opening blazes with candlelight and reads clearly from across the yard. At medium difficulty the main challenge is the wiggly eastern river border, so follow those small curves slowly with a fine saw and remove the big waste piece in sections.
Monster Tree Pumpkin Stencil
A menacing anthropomorphic tree creature with clawed outstretched arms, a roaring jagged-toothed mouth, and swirling branch-tentacle hair stands silhouetted inside a large circular moon in this expert pumpkin stencil. The entire moon disc interior is cut away and glows with light, while the creature silhouette and the area outside the moon ring remain as solid pumpkin skin. The swirling hair tendrils at the top create the finest detail against the glowing backdrop. Cut those wispy curling tips before clearing the large moon interior, to avoid cracking the delicate spiral ends once the surrounding wall is weakened.
Monster Truck Pumpkin Stencil
A side-view monster truck with massive knobby tires dominates this expert pumpkin stencil: two oversized wheels with five-spoke rims, a high-clearance suspension chassis visible between the tires, a boxy cab with window cutouts, a wide front bumper, and flame or dragon graphics on the door panel. The many narrow bridges connecting the chassis rails and the spoke details inside each wheel make this a demanding carve. Cut the interior cab windows and bumper slots first, then tackle the five spokes of each wheel one at a time, always working away from the thin axle hub at the center.
Montana Heart Lettering
Big block letters spell out I heart MT across two rows, with a bold solid heart standing in for the word love. The I, the heart, and the letters M and T are each pierced through as chunky separate shapes, so the message reads clearly from the street. It is an easy lettering pattern; just keep the inner corners of the M crisp by making relief cuts into each notch before removing the piece.
Montana Pumpkin Stencil
Montana's wide, nearly rectangular silhouette makes this an approachable pumpkin stencil for beginners. The top and right edges are almost straight, while the left side carries the state's characteristic jagged, glacier-cut western border that dips in irregular steps down toward the southwestern corner. A small panhandle-like indent near the bottom center adds the final identifying detail. Carving the whole shape as a single open cut lets the jack-o-lantern glow brightly; trace the western zigzag border slowly with a detail blade to keep those steps sharp.
Montana State Shape
Montana's wide rectangular body glows as a single cut-through opening, with the jagged Rocky Mountain border rippling down the state's western edge. The long straight top and eastern sides carve quickly, so most of your care goes into that zigzag left border. Cut the straight runs first to free the bulk of the shape, then nibble out each notch of the mountain boundary with short, controlled strokes.
Moon & Stars Over Hills
A crescent moon hangs over a band of rolling hills while four small stars dot the sky above. Nothing is pierced: you shave away only the skin inside the moon, stars, and hill line, leaving a thin wall that glows soft amber when lit. Keep your shaving depth even, about a quarter inch, so the moon and hills light up at the same brightness across the whole scene.
Moon and Six Diamond Sparkles
A large crescent moon anchors the center while six diamond sparkles and a scattering of small round dots twinkle around it, turning the whole pumpkin into a patch of night sky. Every moon, diamond, and dot is a separate pierced opening, so the pattern wraps light in all directions. Carve the crescent first, then the diamonds from largest to smallest, using a drill or apple corer for the tiny circles.
Moon and Stars Pumpkin Stencil
A slim crescent moon curves on the left side of this space pumpkin stencil while seven five-pointed stars of varying sizes are scattered across the open field to its right, all shapes cut through as separate glowing elements. The smallest stars are only an inch or so across and sit as isolated islands on the pumpkin face; carve those tiny stars first with a craft knife tip or small saw while the wall is at full stiffness, then remove the larger crescent and remaining stars in order from smallest to largest.
Moon Profile and One Star
A serene man-in-the-moon profile fills a broad crescent, his closed-eye face, nose, and lips sculpted in layered relief within the shaved moon shape, while a single five-pointed star glows beside him. The moon is carved as continuous-wall shading at multiple depths and only the star area is thinned to shine brightest. This expert piece is all about depth control; rough in the crescent first, then sculpt the facial features gradually, checking the glow with a light as you go.
Moon with Five Stars and Dots
A large crescent moon anchors the center of the pumpkin while five stars and a sprinkling of small round holes orbit around it. Every element is pierced through the wall, so the finished carve reads as a glowing night sky from across the yard. Carve the crescent first since it is the largest opening, then add the stars, sawing each point from the tip toward the center for clean corners.
Moonlit Cat & Six Stars
A sitting cat gazes up at a crescent moon while six small stars scatter across the night sky, its long tail curling into an elegant spiral. This is a shading design, so the moon, stars, and cat outline are shaved into the skin and glow as luminous grooves rather than open holes. Rated hard for its long unbroken curves, carve the tail spiral in one slow continuous pass and keep your groove depth consistent so the glow stays even.
Moonlit Graveyard Pumpkin Stencil
A bare, gnarled tree with reaching branches, a perched owl, two flying bats, and a cluster of cemetery cross tombstones fill a large crescent-moon frame in this expert graveyard pumpkin stencil. Nearly every element is a carved pierce-through, leaving thin orange bridges for the tree branches and tombstone edges. The lit pumpkin produces a richly detailed haunted graveyard scene. Start with the smallest elements inside the scene, such as the owl silhouette and the cross details on each tombstone, before the large moon arc is removed and the frame loses rigidity.
Moonlit Seal and Water Bands
A harbor seal rests on the shore with its head raised and tail curled up, backed by a huge full moon, drifting clouds, and bands of rippling water below. The entire scene is skin-shaved shading with no pierced holes, so the moon glows brightest behind the seal's darker sculpted body. Expert carvers should establish the moon's deep, even shave first, then build the seal with shallower graded layers so its whiskered face keeps crisp contrast.
Moonlit Tent & Campfire
A cozy campsite scene: a peaked tent with an open door flap, a crackling campfire on crossed logs, two pine trees, and a full moon overhead. It is all continuous-wall shading, so you shave each shape down to glowing flesh while the orange skin between them stays untouched. Etch the largest areas like the tent walls first, then refine the flame tips and pine branches with a small gouge for clean edges.
Mortar and Tilted Pestle
A footed mortar bowl with a tilted pestle resting across its rim, the timeless symbol of pharmacists and potion mixers alike. The bowl, base, and pestle are carved as one connected cutout so the whole emblem glows in a single bright shape. An easy pattern with mostly smooth curves; keep the narrow bridge where the pestle meets the bowl rim intact, and this one is done in a single relaxed sitting.
Mortar and Two Split Capsules
A classic mortar bowl with its pestle angled out of the top sits above two capsule shapes, each crossed by a diagonal dividing bar. The bowl, pestle, and pill halves are cut through, with the capsule bars left as solid rind strips. This medium design makes a fun nod to a pharmacist or nurse; carve each capsule as two small windows so the center bar stays firmly attached.
Motorcycle Pumpkin Stencil
A side-profile motorcycle fills this hard pumpkin stencil with mechanical detail: the front fork and handlebars, a sculpted fuel tank, streamlined seat fairing, and two large concentric-ring wheels. The design uses a mix of solid pumpkin bridges and open cut areas so the bike reads as a crisp silhouette when the jack-o-lantern is lit. The thin fork tubes and the thin strip separating the seat from the rear fairing are the most fragile elements. Carve the two large wheel ring sections first to establish the bottom of the composition before working inward through the frame details.
Mountain Wolf Scene Pumpkin Stencil
This expert-level pumpkin stencil presents a layered wilderness panorama: jagged mountain peaks and a partially obscured moon sit above a mid-ground of ridgelines, while the foreground holds a row of spiky pine trees and a tiny howling wolf on a plateau. Dozens of separate cut-through shapes at varying scales build depth across the whole composition. Tackle the tiny wolf and the narrowest tree spires first, as those fragile points are easiest to cut cleanly before surrounding sections are removed and the pumpkin wall softens.
Mouse Skull Pumpkin Stencil
Two large round ear-shaped circles top a grinning skull face in this hard skull pumpkin stencil, the whole design dripping with melting-wax details that hang from the ears and chin. The skull's hollow round eyes and triangular nose are cut through, while the jagged smiling mouth and drip channels below the face create a pattern of narrow glowing slits. Lit inside a jack-o-lantern, the ears glow as two bright round openings above a menacing skull expression. Carve the two large ear circles first since they are structurally independent, then work down through the drips before tackling the fine interior face cuts.
Mummy Face Pumpkin Stencil
A mummy face fills this pumpkin stencil, built from horizontal overlapping bandage strips that cross the forehead, bridge over hollow oval eye sockets, and wrap beneath a grimacing mouth with small exposed teeth. The bandage layers are the solid orange pumpkin wall while the gaps between them are pierced through, so candlelight reads as stripes of light across a dark face. Cut the eye socket ovals first, then work upward through the bandage gaps from the chin to the crown, keeping each horizontal bridge intact until the cut on either side of it is complete.
Mummy Pumpkin Stencil
A mummy's head and shoulders rise from a base of wrapping strips in this expert pumpkin stencil, the face emerging through layered horizontal and diagonal bandage cut-outs that reveal a single visible eye and a grimacing mouth. The design is dense with interlocking cut shapes separated by thin strips of uncut pumpkin that simulate gauze wrapping. Work from the face outward, completing the eye and mouth details before tackling the long bandage strips so the central features stay stable throughout.
Mushroom Face Pumpkin Stencil
A large mushroom cap viewed head-on occupies the center of this pumpkin stencil, with the rounded cap outlined by a wide curved arc at the top, a pair of angled brow-like ridges beneath giving it a brooding expression, two crescent-shaped gill slits, and a column of vertical stem lines below that narrow at the base into root tendrils. Several short wispy cuts at the upper right suggest spores or texture. The negative spaces between these cut shapes read as a haunting mushroom face when lit. Cut the thin gill crescents before the wider stem column to keep the central face stable.
Mushroom Pumpkin Stencil
A single large mushroom silhouette fills this pumpkin stencil, its broad rounded cap dripping with three short gill-like projections and a slender curved stem below. The entire shape is carved out as one open negative space, so candlelight pours through the whole silhouette at once. Because the stem is narrow where it meets the cap, score that junction lightly with a detail knife before cutting through fully to keep the bridge from cracking under pressure.
Narrow Eyes and Barbed Smile
A sinister jack-o'-lantern face with hooked, narrowed eyes, a small heart-shaped nose, and an enormous crescent smile lined with dozens of needle-thin barbed teeth. The eyes, nose, and grin are cut through, and the tiny spikes along the smile are what push this into hard territory. Carve the long crescent first, then nick each barb outward from the opening with a fine blade so the delicate points do not tear.
Narwhal, Seven Bubbles & Waves
A chubby, smiling narwhal swims among seven round bubbles with stylized waves rolling beneath its tail. Nothing is pierced; the whole design is shaved into the skin so the pale narwhal body, spiral tusk, bubbles, and wave curls stand out against the untouched rind. For this hard shading project, remove skin in shallow, even layers and keep a consistent depth across the body so the narwhal glows uniformly when lit.
Natural Bat with Spread Wings
A lifelike bat spreads its wings across the entire pumpkin, with big upright ears, a furry textured body, and scalloped wing membranes ribbed by long finger bones. Nothing is cut through; the whole animal is sculpted in relief by shaving the background away and layering shallow cuts for fur and wing veins. This expert design is a true sculpting project, so work with gouges and a paring knife, establish the outline first, and build the fur texture with hundreds of short flicking strokes.