Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
291 results · Page 5 of 9
Jesus Fish Pumpkin Stencil
This pumpkin stencil renders the Christian ichthys fish symbol horizontally across the pumpkin face: the fish body outline is formed by pierced dashes along the top and bottom edges, the word JESUS is cut in open block capitals inside the body, and a small cross sits at the tail junction on the right. The letters and outline dashes are all negative space, so the finished jack-o-lantern glows with JESUS framed inside the fish. Carve the outer dash segments first to establish the fish outline, then work each letter from E inward to avoid flexing the narrow skin strips between characters.
Jesus Portrait Pumpkin Stencil
A front-facing portrait of Jesus with long flowing hair, a short beard, and softly rendered facial features fills this expert-level pumpkin stencil. The background and hair are pierced through as large open sections, while thin bridges of solid pumpkin skin form the eyes, nose, and beard details. Lit from inside, the face glows with warmth against the dark cut-out surround. Cut the large hair sections first to ease tension in the skin before tackling the delicate facial feature bridges.
Jolly Roger Pumpkin Stencil
A classic Jolly Roger composition fills this hard pumpkin stencil: a large tricorn pirate hat at the top with an X emblem on its band, a grinning skull face below with oval eyes and a row of small separated teeth, and two crossed cutlass swords extending diagonally from behind the skull. The swords are cut as wide open shapes that frame the face, while the skull's eye sockets and the gaps between each tooth are the smallest, most fragile details. Carve the broad sword shapes first to release the large areas of pumpkin skin, then work inward to the fine tooth gaps using a narrow pointed blade.
Jolly Roger with Cutlasses Pumpkin Stencil
A classic Jolly Roger design fills this pumpkin stencil: a grinning skull topped by a pirate hat bearing a tiny skull-and-crossbones badge sits above two crossed cutlass swords with curled hand-guards. The eye sockets, the hat badge, the small triangular nose cavity, and the gaps between the sword blades are all pierced through. Cut the miniature hat badge first since it is the most delicate isolated element, then the eye sockets and sword gaps, before finishing with the outer hat and blade silhouette.
Kawaii Pizza Slice Pumpkin Stencil
A kawaii pizza slice takes center stage in this pumpkin stencil: the triangular slice has a curved crust bar across the top, a cute face with crescent-shaped eyes and a small smile, circular pepperoni cutouts, and two thin diagonal lines suggesting arms. All the face features, pepperoni circles, and the space surrounding the slice are pierced through, while the slice outline and crust shape remain solid. Cut the tiny crescent eyes and smile first before the circular pepperoni holes, which are easier to control while the surrounding skin is still intact.
Kentucky Heart Lettering
Bold block lettering spells out I, a big heart, and KY across two rows, declaring love for the Bluegrass State in glowing letters. Each letter and the heart are cut fully through, and the chunky serif strokes are wide enough to saw comfortably even for newer carvers. Print at full size and transfer carefully so the letters stay aligned, then cut each stroke from the inside corners outward.
Knight on Horseback Pumpkin Stencil
A mounted knight in full armor charges across this hard pumpkin stencil: a plumed helmet, a raised sword pointing upward, a shield on the left arm, and a rearing horse with flowing mane and tail all read as a single bold silhouette. The composition is cut as one large negative space with only the sword blade, the shield, and the horse's legs as internal solid elements connected by thin skin bridges. Carve the outer silhouette edge first to release the large background, then carefully free the sword blade from top to tip while keeping the shield bridge intact.
Landing Crow Pumpkin Stencil
A crow lands with wings spread wide in this pumpkin stencil, its whole body carved as a single flowing silhouette: broad fanned primary feathers stretch across the top, the compact body curves in the center, and sharp talons reach downward at the bottom. The entire bird shape is one large open cutout, so the glow forms a clean winged-bird shadow on the pumpkin's orange skin at the edges. The outermost wing-tip feathers taper to fine points, so trace and cut those tips before sawing into the larger body to prevent cracking the thin ends.
Leering Eyes and Crooked Nose
Slanted leering eyes with attached round pupils glare above a crooked off-center nose and a jagged sneer packed with pointed fangs, while scattered diamond scars glint across both cheeks. The eyes, nose, mouth, and diamonds are pierced with pupils and fang points left as shell. The hard part is the web of narrow fangs; cut each tooth gap from tip to base and never twist the blade mid-cut.
Left Wink and Six Cheek Wedges
A playful winking jack-o'-lantern: one big round open eye, one arched wink, a triangle nose, and a smiling mouth with blocky teeth, all framed by three thin whisker-like wedges slashed across each cheek. Every opening is cut through, and the six cheek wedges throw extra slivers of light. At medium difficulty, cut the large features first and finish with the skinny cheek slits, using a fine saw so each wedge tapers to a clean point.
Let's Go Brandon Pumpkin Stencil
The phrase "LET'S GO BRANDON" is set in chunky all-caps stencil lettering across two lines, with each letter built from thick strokes and bridged counters so the whole design holds together as a single carved piece. The letters are fully pierced, glowing bright when lit. Because the letter A and the two O's have floating internal islands, cut those counter shapes first before clearing the surrounding letter bodies to keep the islands from shifting.
LGBTQIA2S+ Heart Pumpkin Stencil
A large bold heart silhouette is the main shape, with the text "LGBTQIA2S+" set in thick stencil letters running horizontally across the heart's center. The heart is cut in two halves separated by the text band, which itself is cut through except for the letter bridges. Lit from inside, the whole heart glows with the text reading as solid orange stripes across the opening. Carve the upper and lower heart halves before the text strip to keep the letter bridges from tearing while the wall is still reinforced.
Long Dog with Three Short Feet
A full-body dachshund silhouette trots across the pumpkin, long low back, floppy ear, upturned tail, and short legs all captured in one clean glowing shape. The entire dog is removed as a single cut-through, so light floods the whole outline. This easy design has just one tricky zone: the narrow gaps between the legs. Cut the big body outline first, then carve carefully around each leg so the slim wall strips between them survive.
Long Dog, Bone and Four Ovals
A long-bodied dachshund trots across the pumpkin as one big glowing silhouette, with a dog bone floating above and a row of four oval accents below like little paw steps. The dog, bone, and ovals are all pierced through, so the whole scene lights up brightly with just a handful of cuts. Start with a hole in the dog's belly and saw outward, taking the thin legs and tail slowly so they stay crisp.
Long-Nosed Abstract Face
An abstract face in a modern-art style: a sweeping brow arc crosses the top, a long straight nose drops down the middle, curled spiral shapes form the cheeks, and short hatch marks add texture beside one eye. Each line is a pierced channel, so the portrait glows as a set of elegant strokes. At hard difficulty the narrow curved channels are the challenge; keep them at least a finger-width and undercut the edges slightly so light spreads.
Lopsided Zigzag Grin
A cheerfully lopsided jack-o'-lantern face with one big round eye, one slanted triangle eye, and a wide zigzag grin stretching across the pumpkin. All three features are pierced fully through so candlelight pours out, while the surrounding skin stays untouched. The zigzag mouth is the trickiest part at this medium level, so cut each tooth point in two short strokes that meet at the tip instead of dragging one long sawing pass.
Make America Great Again Pumpkin Stencil
Four lines of bold stencil-style block text spell out MAKE AMERICA GREAT AGAIN across this jack-o-lantern stencil, with a five-pointed star flanking the top line and another pair of stars at the bottom. Every letter and star is carved as a separate pierced shape, so the orange pumpkin wall forms bridges inside closed letterforms like A, G, and R. Before cutting, secure those interior letter islands with a small pin through the pumpkin flesh so they don't drop out mid-carve and leave shapeless holes.
Martini Glass with Olive
A tall martini glass with a skewered olive resting on the rim, drawn in clean bar-sign style from the wide conical bowl down the slender stem to the round base. It carves as skin-shave shading, so the glass appears as smooth pale relief against the dark rind with no pierced openings. A medium project overall; keep your peeling depth even across the big bowl, and leave the thin stem for careful last strokes.
Massachusetts State Shape
The Massachusetts silhouette stretches across the pumpkin, complete with the unmistakable curled hook of Cape Cod flexing off the eastern end. The entire state is cut through as one opening so the whole commonwealth glows. That skinny Cape Cod arm is the trickiest part of this medium carve; leave it for last, support the wall with your free hand, and use gentle strokes so the curl does not tear loose.
Mean Skull Pumpkin Stencil
Two large angled triangular eyes slash across the upper face of this jack-o-lantern stencil, pointing sharply inward to give the skull an aggressive, furrowed scowl. Below, two narrow rectangular fang-tips drop from the center, and a wide jagged mouth with three upward-pointing teeth stretches across the bottom. All six shapes are cut through individually, leaving solid orange between them to hold the face together. The small central fang-tips are easy to snap, so cut each one from the outer corner inward and avoid side pressure on the blade.
Memorial Awareness Ribbon Pumpkin Stencil
An awareness ribbon in the classic looped shape centers this pumpkin stencil, its two long tails crossing at the bottom to form a diamond point. The ribbon outline is pierced through so candlelight floods the shape against the solid orange wall, making it read as a bold ribbon of light. The narrow crossed tails at the bottom form a delicate bridge, so cut the large upper loop sections first and save the crossing point for last when the rest of the wall is fully open and the structure is lightened.
Missouri State Shape
The unmistakable outline of Missouri, complete with its bootheel corner, carved as one large glowing state silhouette. The entire state shape is cut fully through the wall, so the opening blazes with candlelight and reads clearly from across the yard. At medium difficulty the main challenge is the wiggly eastern river border, so follow those small curves slowly with a fine saw and remove the big waste piece in sections.
Montana Heart Lettering
Big block letters spell out I heart MT across two rows, with a bold solid heart standing in for the word love. The I, the heart, and the letters M and T are each pierced through as chunky separate shapes, so the message reads clearly from the street. It is an easy lettering pattern; just keep the inner corners of the M crisp by making relief cuts into each notch before removing the piece.
Moon & Stars Over Hills
A crescent moon hangs over a band of rolling hills while four small stars dot the sky above. Nothing is pierced: you shave away only the skin inside the moon, stars, and hill line, leaving a thin wall that glows soft amber when lit. Keep your shaving depth even, about a quarter inch, so the moon and hills light up at the same brightness across the whole scene.
Moon and Stars Pumpkin Stencil
A slim crescent moon curves on the left side of this space pumpkin stencil while seven five-pointed stars of varying sizes are scattered across the open field to its right, all shapes cut through as separate glowing elements. The smallest stars are only an inch or so across and sit as isolated islands on the pumpkin face; carve those tiny stars first with a craft knife tip or small saw while the wall is at full stiffness, then remove the larger crescent and remaining stars in order from smallest to largest.
Moon with Five Stars and Dots
A large crescent moon anchors the center of the pumpkin while five stars and a sprinkling of small round holes orbit around it. Every element is pierced through the wall, so the finished carve reads as a glowing night sky from across the yard. Carve the crescent first since it is the largest opening, then add the stars, sawing each point from the tip toward the center for clean corners.
Moonlit Cat & Six Stars
A sitting cat gazes up at a crescent moon while six small stars scatter across the night sky, its long tail curling into an elegant spiral. This is a shading design, so the moon, stars, and cat outline are shaved into the skin and glow as luminous grooves rather than open holes. Rated hard for its long unbroken curves, carve the tail spiral in one slow continuous pass and keep your groove depth consistent so the glow stays even.
Moonlit Graveyard Pumpkin Stencil
A bare, gnarled tree with reaching branches, a perched owl, two flying bats, and a cluster of cemetery cross tombstones fill a large crescent-moon frame in this expert graveyard pumpkin stencil. Nearly every element is a carved pierce-through, leaving thin orange bridges for the tree branches and tombstone edges. The lit pumpkin produces a richly detailed haunted graveyard scene. Start with the smallest elements inside the scene, such as the owl silhouette and the cross details on each tombstone, before the large moon arc is removed and the frame loses rigidity.
Moonlit Tent & Campfire
A cozy campsite scene: a peaked tent with an open door flap, a crackling campfire on crossed logs, two pine trees, and a full moon overhead. It is all continuous-wall shading, so you shave each shape down to glowing flesh while the orange skin between them stays untouched. Etch the largest areas like the tent walls first, then refine the flame tips and pine branches with a small gouge for clean edges.
Mortar and Tilted Pestle
A footed mortar bowl with a tilted pestle resting across its rim, the timeless symbol of pharmacists and potion mixers alike. The bowl, base, and pestle are carved as one connected cutout so the whole emblem glows in a single bright shape. An easy pattern with mostly smooth curves; keep the narrow bridge where the pestle meets the bowl rim intact, and this one is done in a single relaxed sitting.
Mortar and Two Split Capsules
A classic mortar bowl with its pestle angled out of the top sits above two capsule shapes, each crossed by a diagonal dividing bar. The bowl, pestle, and pill halves are cut through, with the capsule bars left as solid rind strips. This medium design makes a fun nod to a pharmacist or nurse; carve each capsule as two small windows so the center bar stays firmly attached.
Mountain Wolf Scene Pumpkin Stencil
This expert-level pumpkin stencil presents a layered wilderness panorama: jagged mountain peaks and a partially obscured moon sit above a mid-ground of ridgelines, while the foreground holds a row of spiky pine trees and a tiny howling wolf on a plateau. Dozens of separate cut-through shapes at varying scales build depth across the whole composition. Tackle the tiny wolf and the narrowest tree spires first, as those fragile points are easiest to cut cleanly before surrounding sections are removed and the pumpkin wall softens.
Mummy Face Pumpkin Stencil
A mummy face fills this pumpkin stencil, built from horizontal overlapping bandage strips that cross the forehead, bridge over hollow oval eye sockets, and wrap beneath a grimacing mouth with small exposed teeth. The bandage layers are the solid orange pumpkin wall while the gaps between them are pierced through, so candlelight reads as stripes of light across a dark face. Cut the eye socket ovals first, then work upward through the bandage gaps from the chin to the crown, keeping each horizontal bridge intact until the cut on either side of it is complete.
Narwhal, Seven Bubbles & Waves
A chubby, smiling narwhal swims among seven round bubbles with stylized waves rolling beneath its tail. Nothing is pierced; the whole design is shaved into the skin so the pale narwhal body, spiral tusk, bubbles, and wave curls stand out against the untouched rind. For this hard shading project, remove skin in shallow, even layers and keep a consistent depth across the body so the narwhal glows uniformly when lit.
Natural Bat with Spread Wings
A lifelike bat spreads its wings across the entire pumpkin, with big upright ears, a furry textured body, and scalloped wing membranes ribbed by long finger bones. Nothing is cut through; the whole animal is sculpted in relief by shaving the background away and layering shallow cuts for fur and wing veins. This expert design is a true sculpting project, so work with gouges and a paring knife, establish the outline first, and build the fur texture with hundreds of short flicking strokes.
North Carolina State Shape
North Carolina stretches across the pumpkin as one long glowing cutout, from the pointed western mountain tip to the fringed Outer Banks coastline on the right. The entire state interior is removed so the distinctive wedge shape reads clearly at night. Rated hard because of the fine barrier-island fingers along the coast; cut the smooth northern border first, then work the ragged eastern edge slowly with a detail saw, leaving the thinnest points for last.