Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
291 results · Page 6 of 9
Ohio State Shape
Ohio's rounded river-border silhouette is cut out as a single glowing shape, with the wavy southern edge and squared northern corners removed clean through the wall. The surrounding pumpkin stays whole, so the map reads instantly from across the yard. Trace the bumpy Ohio River edge slowly with a fine saw; the rest of the outline is gentle curves and easy straightaways.
Open-Jawed T-Rex
An open-jawed T-Rex strides across the pumpkin in full profile, tiny arms forward and thick tail sweeping behind. The entire dinosaur is a shaded silhouette: shave away the skin inside the body so the shape shows as a lighter panel against the orange rind, with no pierced holes. At medium difficulty, outline the jaws, claws, and tail tip carefully first, since those narrow points define the whole silhouette when the sun or candle hits it.
Opossum Pumpkin Stencil
A cartoon opossum crouches in profile across this hard-difficulty pumpkin stencil, its oversized round eyes and small pupils peering out, tall rounded ears pricked up, a plump body with scruffy fur texture, and tiny clawed feet extending below. The large dark body mass is carved away while the ring-shaped eye outlines and a few scattered fur marks stay solid, creating a bold silhouette that reads well even without a light source. Cut the circular eye rings before removing any surrounding flesh so they keep their structural support.
Ornate Sugar Skull Pumpkin Stencil
This sugar-skull pumpkin stencil features a circular skull face filled with symmetrical Dia de los Muertos ornamentation: two large almond-shaped eye sockets, a central floral cross motif above them, scrollwork tendrils curling outward on both cheeks, and a rectangular tooth-grid at the chin. The design carves as a mix of open negative spaces and solid orange bridges that define each decorative element. Cut the cheek scrollwork before removing the large eye sockets, since the thin curling lines are easier to control while the surrounding wall is still solid.
Pennsylvania State Shape
Pennsylvania's blocky silhouette stretches wide across the pumpkin, straight along the top and bottom with the jagged Delaware River border zigzagging down the eastern side. The whole state is a single pierced opening that glows as one solid panel. Take the ragged eastern edge slowly with a fine saw, backing the blade out at each angle change so the small points do not snap off.
Pi Symbol Pumpkin Stencil
A large, calligraphic pi symbol dominates this pumpkin stencil, with a long sweeping horizontal crossbar that curls upward at both ends and two tall descending legs that curve outward at the bottom. The single solid shape is cut entirely out of the pumpkin face as one connected piece, leaving a bold glowing symbol framed by solid orange. The long thin crossbar is the most vulnerable element: cut both legs first to release tension before slicing along the bar from each end toward the center.
Pineapple with Layered Crown
A plump pineapple with a full crown of layered, curling leaves and a body covered in the fruit's signature diamond lattice texture. It carves as continuous-wall relief: the fruit is shaved into the skin at different depths so the crosshatched skin and overlapping leaves stand out dimensionally, with nothing cut through. This hard design goes smoothest if you carve the diamond grid with two sets of parallel angled grooves before shaping each leaf individually.
Pineapple with Split Crown
A plump pineapple with a dramatic split crown of long, splayed leaves and a body filled with a deep diamond crosshatch pattern. The whole design is skin-shave work: leaves and body are peeled to bright flesh while crosshatch grooves are cut deeper for a woven texture. Score the diamond grid lightly with a ruler-guided knife before carving so the lattice stays even across the pumpkin's curve.
Pirate Pumpkin Stencil
A grinning pirate face topped by a tricorn hat is the subject of this hard pumpkin stencil: a skull-and-crossbones badge on the hat brim, a round-brimmed hat spreading wide, a leather eye patch over one eye, a weathered face with deep laugh lines, a broad toothy smile, and a pointed goatee at the chin. The lit design reveals a cheerful swashbuckler portrait full of character. Cut the small skull-and-crossbones elements on the hat first while the surrounding skin is firm, then work down through the face, saving the wide hat brim last.
Pirate Ship Pumpkin Stencil
A pirate ship viewed broadside fills this expert pirate pumpkin stencil, with a large sail bearing a skull-and-crossbones cutout, a cartoonish pirate figure standing at the bow with a sword, a cannon on the stern deck, and decorative hull porthole hooks below. The design has many small isolated cut pieces, including the skull's eye sockets and crossbones, the cannon barrel, and the pirate's facial features. Carve the skull-and-crossbones details on the sail first, since they sit within a large solid background that holds them firmly while you work the tiny pieces.
Pirate Skull Pumpkin Stencil
A grinning pirate skull wearing a broad tricorn hat dominates this expert-level pumpkin stencil, with a second miniature skull-and-crossbones badge emblazoned on the hat brim. Dense cutwork in the teeth row, eye sockets, and hat badge creates many small isolated pieces held together by narrow bridges of pumpkin flesh. Begin with the tiny crossbone details on the hat badge while your hands are freshest, then move to the eye sockets and finally the toothed lower jaw.
Pirate Skull with Parrot Pumpkin Stencil
A weathered pirate skull in a battered tricorn hat stares out from this expert pumpkin stencil, a parrot perched on the skull's head and tattered coat lapels framing its hollow cheeks. The skull-and-crossbones badge on the hat, individual finger bones along the bottom, and ragged coat edges create dozens of intricate cut sections. Carve the small hat badge first, then the interior face hollows, before moving outward to the flowing coat edges where the thinnest bridges live.
Plain Cross with Nine Rays
A plain cross stands at the center while nine tapered rays of light fan outward around it, like a sunburst breaking through. This shaded design is carved on a continuous wall, shaving the skin away so the cross and rays glow warmly with no pierced openings, which suits a reverent, softer look. Shave the cross to an even depth first, then taper each ray shallower toward its tip so the light appears to fade outward.
Plain Plus and Four Round Dots
A bold plus symbol sits at the center with four round dots anchoring the corners, a clean five-hole design that reads instantly from the street. The cross and dots are all cut straight through, with no fragile details anywhere on the pattern. A great pick for nurses, EMTs, and first-aid fans: use a ruler when transferring the design so the cross arms stay perfectly square.
Plus Above Four Windows
A bold medical plus sign glows at the top while a row of small square windows and a larger doorway below turn the pumpkin into a tiny lit-up hospital. Every shape cuts straight through, and the straight-edged squares make this an easy, tidy carve, perfect for healthcare workers or a first-responder porch display. Score each square with a ruler before cutting so the windows line up in a neat row.
Police Badge Pumpkin Stencil
A five-pointed star with a horizontal banner across its center spelling out POLICE in block capital letters makes up this pumpkin stencil, styled after a classic law-enforcement badge. The interior of the star points and the letter counters are cut through, while the banner background and star outline remain as solid skin. The enclosed center of the letter O is the trickiest piece: slice around it last and press a toothpick through the back of the pumpkin wall to pin the small oval disc in place.
Pride Heart Pumpkin Stencil
A bold heart outline with the word "PRIDE" in wide block letters across its center makes up this easy pumpkin stencil. The heart shape is split horizontally by the text band: the upper heart arch stays solid at the top, the letter counters (the enclosed spaces inside letters like R, D, and I) stay as solid islands, and the large lower heart triangle along with the negative spaces around each letter are pierced through. When lit, the glowing letters read sharply against the dark heart background. Cut the letter interiors first, preserving each letter's counter islands, before removing the large heart body below.
Quartered Eye and Zigzag Grin
A huge single eye quartered by a bold plus-shaped bar dominates this monster mask, flanked by rows of diamond cutouts down each cheek, a tiny skull-like nose, and a jagged zigzag grin along the bottom. The eye quadrants, diamonds, nose, and zigzag are all cut through, with the plus bar and diamond lattice left as connected skin. This hard design demands order: carve the four eye sections first, then diamonds from the center outward, protecting that thin cross bar throughout.
Queen Portrait Pumpkin Stencil
An elderly queen in full regalia looks forward from this pumpkin stencil, her curly hair framing a detailed face with distinct brows, eyes, and lips, topped by an ornate crown bearing a cross, leaf shapes, and decorative elements. The portrait is built from dozens of small and medium cut sections across the hair, face, and jeweled bodice, with thin orange bridges holding the likeness together. Begin with the smallest crown ornament shapes at the very top before moving to the face, since removing the large hair sections early would flex the wall and risk tearing the delicate facial bridges.
Radiant Cross and Lower Leaves
An ornate flared cross rises from a bed of scrolling leaves while sunburst rays fan out behind every arm, all carved in layered relief. Nothing pierces the wall: the cross, rays, and foliage are shaved at multiple depths so the design reads as glowing sculpture with crisp raised borders. This expert shading project demands patience, so map your three depth levels first and always carve the background rays before refining the cross's beveled edges.
Rainbow and Two Clouds
A four-band rainbow arches across the top of the design, with two puffy clouds floating beneath its ends. Each rainbow band and both clouds are cut fully through, so the concentric arcs glow in bright stacked stripes separated by thin ribs of rind. This medium pattern lives or dies by those ribs, so cut the innermost arc first and work outward, supporting each rib with your free hand as you remove the waste.
RIP Graveyard Pumpkin Stencil
A moonlit graveyard scene arches across this pumpkin stencil, with a large cracked tombstone bearing the letters RIP at center, flanked by two cross-topped stones and tufts of grave grass below, all framed inside a curved arch at the top. The composition is pierced so the entire scene cuts away from the pumpkin wall and glows as one large backlit picture. Cut the letter shapes inside RIP first with a detail blade, then work outward through the tombstone cracks, cross details, and grass tufts before removing the large arch framing area last.
Rock Singer Pumpkin Stencil
A vintage rock-and-roll singer with a greased pompadour and an open-mouthed grin holds a microphone to his lips on this Halloween pumpkin stencil, his body squared up in a wide stance with legs apart and a guitar strap across the chest. The figure is built from large and medium pierced sections with solid orange bridges defining the face, hair curl, and clothing folds. When lit, the silhouette reads as a golden retro performer mid-song. Cut the face details, including the open mouth and eye lines, before removing the large chest and torso sections that support the surrounding wall.
Rocket and Stars Pumpkin Stencil
A retro rocket ship blasting diagonally upward through a field of five-pointed stars fills this easy pumpkin stencil. The rocket body is a large solid pierce-through with a small circular porthole cut from its center, and two swept fins angle beneath it; six stars of varying sizes are scattered across the field. Lit from within, the rocket and stars all glow as bright cut-out shapes. Cut the small circular porthole in the rocket body before removing the rocket silhouette itself, since that circle is far easier to score cleanly while the surrounding wall has full support.
Rottweiler Pumpkin Stencil
A close-up Rottweiler face looks straight ahead on this dog pumpkin stencil, with expressive round eyes, a broad nose with a spiral nostril, and a relaxed mouth with a hint of jowl. Dozens of irregular cut sections across the forehead, cheeks, and ears create the breed's tan-and-black coat markings, all bridged by thin solid pumpkin-wall lines. When lit, the face glows with warmth through every gap while the orange bridges read as fur texture. Cut all the small inner-face detail shapes first, especially the nostril spiral, before tackling any of the large outer sections that would otherwise loosen the wall.
Round Cartoon Monster Pumpkin Stencil
A small round cartoon monster occupies this pumpkin stencil: a chunky body with two large circular eyes, a frowning row of square teeth, a curly stem-like antenna on top, sideways horns, stubby arm appendages, and splayed feet all carved as separate islands of light. The design has many floating cut-through pieces spread across the face of the pumpkin. Start with the two circular eye holes since they are the most central reference points, then position the surrounding appendage cuts relative to them.
Round Fish and Three Bubbles
A plump fish silhouette with a notched triangle tail swims across the pumpkin, trailed by three round bubbles rising toward the stem. The fish body and each bubble cut completely through, giving anglers a bold, glowing catch with almost no fine detail to fuss over. An easy pattern; remove the large body in two pieces split at the tail notch, then drill or carve the bubbles smallest to largest.
Running Dinosaur and Long Tail
A velociraptor sprints across the pumpkin in full silhouette, head low, clawed legs mid-stride, and its long tail sweeping behind for balance. The entire dinosaur cuts through as one glowing shape, with the narrow tail and slim legs providing the medium challenge. Carve the thin tail and leg sections first in short segments, then remove the large body last so the delicate extremities are never left unsupported.
S-Curve Snake
A thick snake winds through a bold S curve, its tapered head at the top and tail flicking out at the base, all carved as a single flowing opening. The whole serpent shape is cut through, so one continuous ribbon of light snakes across the pumpkin after dark. Because it is a single aperture with no fragile bridges, this easy design just needs slow steady knife work around the curves.
Scalloped-Wing Bat
A wide-winged bat hangs in the center of a glowing scalloped panel, its scalloped wing edges and small round eyes standing out in dark relief. You shave the skin away around the bat so the shape stays raw pumpkin while the shaved field lights up behind it. Keep your shading depth even across the whole panel so the backlight glows uniformly around those wing scallops.
See-No-Evil Monkey Pumpkin Stencil
The see-no-evil monkey emoji is rendered as a wide face with two large hands pressed over the eyes and two banana-shaped ears flaring out, with a broad smile, round nose dots, and small cheek details visible below the hands in this hard pumpkin stencil. The overlapping hand fingers create a dense grid of narrow cut channels across the upper half of the design. Work the individual finger slots from the center outward so each completed cut is braced by uncut pumpkin on at least one side.
Seven Stars in a Winding Trail
Seven five-pointed stars of varying sizes wind down the pumpkin in a gentle S-curve, like a constellation trailing across the night sky. Each star is a full cut-through opening, so the finished lantern twinkles from every angle. Star points are where beginners slip, so cut each arm from the outer tip inward toward the center and let the cuts meet, which keeps all five points sharp on every star.
Seven-Leaflet Cannabis Leaf
A symmetrical seven-leaflet cannabis leaf spread across the pumpkin's face, each serrated blade radiating from a short central stem. The leaf glows through shaved skin rather than open holes, so every jagged tooth along the edges reads clearly while the wall stays solid. A medium shading design; score the full outline first, then peel from the center of each leaflet outward so the serrations do not tear. Best saved for the adults-only party pumpkin.
Shaded Whale Shark Profile
A whale shark glides across the pumpkin in full profile, its wide flat head, tall tail fin, and back covered in the species' signature spots and ridge lines. This is a shading design with no pierced holes: you shave the skin inside the body while leaving orange skin for the spots, gill slits, and stripes. Shave the large body sections to an even depth first, then re-crisp the spot edges with a detail knife.
Side-View Penguin
A plump penguin stands in profile with its beak raised, and the design is built entirely from skin shading rather than pierced cuts. You shave away the rind across the penguin's white belly and face for a bright glow, leave the darker back and flipper as untouched skin, and etch a fine outline around the whole bird. For this medium etch, remove the belly in shallow, even layers and stop as soon as light glows through at test lighting.
Sideways Lobster with Claws
A full lobster stretches sideways across the pumpkin with segmented tail, walking legs, long antennae, and two oversized claws rendered in shaved-skin relief. Nothing is pierced through: the body shapes are peeled bright while the segment lines and joints remain as dark etched divisions. This is a hard shading project because of all those segments, so map the outline first with shallow V-cuts, clear the large claw and tail areas, and save the skinny legs and antennae for careful final passes.