Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
318 results · Page 9 of 9
Turtle Pumpkin Stencil
A side-view turtle with a segmented shell is the subject of this easy pumpkin stencil: the domed carapace is divided into roughly twelve polygonal scute cutouts separated by thin pumpkin-skin ridges, the head extends forward on a curved neck with a small circular eye detail, and four stubby legs and a short tail complete the silhouette. When lit, the shell glows as a mosaic of separate panels. Cut the smaller head and eye section before tackling the large shell scutes, since the head area has less surrounding support once the shell pieces are removed.
Turtle with Raised Shell Seams
A gentle box turtle strolls across the pumpkin, its domed shell divided into raised seams and its legs dotted with rounded scale spots. The whole design is skin-shave work with no pierced holes; you strip the skin inside each shell panel and body section while leaving the seam lines dark and raised. Vary your shaving depth slightly between panels to give the shell dimension, and save the tiny scale dots for last.
Twenty-Two Ray Smiling Sun
A beaming sunburst face with closed happy crescent eyes, a small triangle nose, and a huge picket-tooth grin, all encircled by a radiating ring of alternating teardrop and triangle ray cutouts. Every ray, tooth gap, and feature pierces through, and the sheer count of small openings makes it an expert carve. Cut the outer rays in sequence around the circle first, rotating the pumpkin as you go, before opening the large mouth.
Two Fish and Six Bubbles
Two plump fish swim toward each other with a rising trail of six bubbles between them and two wavy water slots rippling underneath. The fish bodies, bubbles, and wave lines are all cut through, turning the pumpkin into a glowing underwater scene. A relaxed medium carve for anglers and lake families; drill the bubbles in ascending size order, then saw the fish, and finish with the long shallow wave curves.
Two Mushrooms Pumpkin Stencil
Two mushrooms fill this easy pumpkin stencil: a large one with a wide rounded cap dotted by three circular spots and two curved gill lines beneath, and a smaller companion mushroom to its right with a dome cap and two dots. Both stems and root tendrils are cut through as open shapes against solid pumpkin wall, giving the lit jack-o-lantern a clean, whimsical forest-floor silhouette. Leave the solid ridgeline that separates the large cap from the gill area intact as a natural bridge, cutting it would cause the gill shapes to fall free.
Two Profiles Within a Heart
A large heart is cut out of the pumpkin, but two facing profiles are left standing in the middle of the opening, so a couple appears to lean toward each other in silhouette against the glow. The heart interior is removed while the joined profile column stays attached at the bottom point. This is a hard carve because those noses, lips, and chins are thin; use a fresh fine blade and cut away from the profiles, never into them.
Unequal Gourd Surprise Eyes
Made for a bottle gourd or any tall, curvy squash, this design is a startled little face: two round eyes of slightly different sizes and a tall oval mouth frozen mid-gasp. All three shapes are cut through, and the mismatched eyes give the face its comic personality. Gourd walls are thinner and harder than pumpkin, so an easy-carve tip is to drill a pilot hole in each shape and saw slowly outward from there.
Unequal Heart Eyes and Smile
Inspired by the heart-eyes emoji, this lovable face pairs two big heart-shaped eyes with a broad crescent smile. All three openings are cut fully through, so the hearts beam bright pink-orange light after dark. The gentle notch at the top of each heart is the only fiddly spot in this easy carve; poke a starter hole in the middle of each heart and saw up into the notch from inside so the point stays sharp.
Unequal-Eyed Whiskered Cat
A playful cat face built from two pointed ears, one large round eye and one smaller one, a tiny nose, and three long whisker slits flaring out on each side. All the shapes are pierced through so the ears, mismatched eyes, and whiskers glow in a wide band across the pumpkin. Cut the skinny whisker slits first while the wall is strongest, then open the bigger eye holes.
Unicorn Head Pumpkin Stencil
A unicorn head in three-quarter profile faces left with eyes gently closed and long lashes visible, a segmented spiraling horn at the brow, small round nostrils, and a flowing mane of long layered strands cascading to the right on this hard pumpkin stencil. The mane strands are narrow parallel ribbons of solid skin separated by pierced channels. Cut the large open head silhouette first, then carve each mane ribbon from its base at the neck upward so the tapered strand tips are the very last cuts and never lose support.
Unicorn Pumpkin Stencil
A unicorn head in profile fills this beginner pumpkin stencil as a single clean silhouette: the long curved horn, a flowing mane with jagged spiky edges along the neck, and a graceful muzzle. The entire design is carved as one connected open shape so the lit jack-o-lantern shows the full unicorn outline glowing as a bright cutout. The jagged mane edge along the top of the neck creates a row of shallow points that can break if the blade wanders. Keep cuts on the mane tips short and angled directly inward toward the center mass to avoid snapping the narrow points.
Unicorn with Four Mane Points
A graceful unicorn head in profile, complete with a spiral horn, an alert ear, and a flowing mane that ends in four swooping points down the neck. The whole silhouette is cut through as one large opening, so the entire unicorn glows against the dark pumpkin. It is an easy carve despite its size; remove the big piece in two or three sections instead of forcing it out whole.
Upright Cat Beneath a Crescent
An upright cat sits in silhouette beneath a small crescent moon, just two cut-through openings on the whole pumpkin. The cat's ears, curved back, and tail all come out as a single piece, leaving the shell dark around two clean glowing shapes. Trace the cat's outline slowly in one continuous cut and push the piece out from inside the pumpkin for the cleanest edge.
Upright Ears, Heart and Dots
A French bulldog's unmistakable head, with its big upright bat ears and round cheeks, glows as one large cut-through opening, crowned by three small dots above and a little heart floating below the chin. The design is mostly one generous shape, so it carves quickly and forgives wobbly saw lines. Cut the heart and dots first as warmups, then saw the head outline slowly around those tall ear points.
Upright-Eared Bulldog Face
An adorable French bulldog face with the breed's signature upright bat ears glowing at the top, round eyes, a button nose, and a tidy mustache-like muzzle with a small mouth below. The ears, eyes, nose, and muzzle are pierced openings while the skin between them shapes the flat Frenchie face. At medium difficulty the big ear panels are easy, but take care around the narrow gap between the nose and mouth so the bridge stays intact.
Upturned Seal Pup
A seal pup arches upward with its nose in the air, whiskers fanned, and tail flippers curled at the base of the design. It is carved entirely in continuous-wall shading, with the body shaved smooth and details like the eye, whiskers, and flipper creases etched as darker lines left in relief. Rated hard because of those layered depths, so establish the full body at one shallow depth first, then return with a smaller gouge to deepen the belly and neck curves gradually.
Utah Heart Lettering
A two-row hometown tribute: a serif I beside a full heart on top, with big U and T letters below, every shape cut through to glow warmly at night. The letterforms are thick and simple, so this carves quickly. The U's inner curve is the only tight turn; saw it in two passes meeting at the bottom of the arc so the inside edge stays smooth.
Vermont Heart Lettering
Classic hometown pride: a bold letter I beside a chunky heart on the top row, with big block letters V and T beneath, spelling out love for Vermont. All four elements are cut fully through in thick, forgiving strokes, which keeps this an easy carve despite being lettering. Cut each character from the inside of its outline and leave generous rind between the rows, since block letters stay readable even if your lines wobble a little.
Waving Ghost with Four Lobes
A friendly little ghost lifts one stubby arm in a wave, its four-lobed hem trailing below round eyes and a happy open mouth. The whole figure is shaved shading: you remove skin inside the body so it glows softly, then leave the eyes and mouth as raised uncarved pumpkin. Even, shallow shaving is all it takes, which makes this a forgiving introduction to etching.
Waving Wispy Ghost
A friendly ghost with trailing wisps waves from the pumpkin, its oval eyes and mouth left as darker raised skin against the pale shaved body. There are no pierced openings; you peel the skin away inside the ghost outline so the flesh glows gently when lit. Shave in smooth, overlapping strokes and stop at the eye and mouth outlines so those features stay dark and crisp.
Wavy Jellyfish & Bubbles
A serene jellyfish drifts across the pumpkin, its smooth dome bell trailing five wavy tentacles among scattered bubbles. Nothing is pierced; the entire design is shaved into the skin so the bell, tentacles, and bubbles appear as pale carved relief against the orange rind. For this medium etch, remove only the skin and a thin layer of flesh at an even depth so the lines stay crisp and uniform.
White-Pumpkin Happy Face
A cheerful jack-o'-lantern face with big rounded eyes, a small triangle nose, and a wide crescent smile with a single square tooth. Every feature is fully cut through, so the whole face glows once a candle goes in. It looks especially striking on a white pumpkin, where the warm light pops against the pale skin. An easy first carve; just leave the little bridge above the tooth intact so the grin holds its shape.
Wide Paw with Four Oval Toes
A big friendly paw print with a broad rounded pad below four plump oval toes arranged in a gentle arc. All five shapes are cut fully through, turning the pumpkin into a glowing tribute to your favorite four-legged friend. This is one of the easiest patterns to carve well; cut each oval toe first while the wall is strongest, then remove the large pad in two halves for clean edges.
Wild-Haired One-Eyed Monster Pumpkin Stencil
This one-eyed monster character has a round head ringed with wild hair, a single large circular eye socket, a wide grinning mouth, and a short stubby body with splayed hands and feet. The stencil mixes solid areas (the pupil island inside the eye, the hair fringe, the torso patches) with pierced cutouts for the eye socket, mouth, and body gaps. Lit from inside, the monster's oversized eye glows brightly while the hair and body details form a dark, shaggy border. Keep the small circular island inside the eye intact, losing it turns the design from a recognizable eye into a plain hole.
Wink and Split-Tongue Smile
A playful winking face sticks its tongue out at trick-or-treaters: one round eye is a full cutout, the other a squeezed-shut winking arc, above a wide grin with a dangling split tongue. The face ring, eyes, and mouth are pierced through while the tongue stays attached as a bridge of pumpkin. Cut around the tongue last and leave it slightly thicker than the line for strength.
Winking Face Emoji Pumpkin Stencil
A round emoji face with one eye winking shut and the other squinting in a spiral, a wide grin, and a tongue sticking out fills this easy pumpkin stencil. The large circular face outline, the wink line, the spiral eye, the smile strip, and the tongue are all solid orange wall, while the areas around them are pierced so the whole face glows from within. Carve the tongue's narrow center notch before removing the wide background cuts, since the notch is the tightest detail and easiest to slip on with excess pumpkin removed around it.
Wisconsin Heart Lettering
Wisconsin love, spelled out big: a tall letter I and a plump heart across the top row with wide W and I letters underneath. All the letterforms and the heart are cut clean through in a chunky serif style, so the message beams from the porch after sunset. As an easy carve, the only tricky spot is the W's inner points; nick each notch with the blade tip before making the long cuts.
Woodland Toadstool Relief
An enchanted cluster of spotted toadstools carved in deep relief: one grand mushroom with a striped, gilled underside towers over smaller caps, ribbed stems, and leafy ground cover below. There are no pierced holes; the whole scene is sculpted by shaving the wall to different depths so light glows warmest under the big cap. This expert design rewards planning, so rough out the major cap shapes first and save the fine gill lines and spots for last.
Woolly Alpaca & Long Neck
A woolly alpaca stands in profile with its long neck raised, its whole fluffy body rendered as one shaved shape with a sweet stippled face. This is a continuous-wall design: peel away just the skin inside the alpaca outline so the pale flesh reads as its fleecy coat, with no pierced holes. Use a small loop tool for the tight fur texture around the head, and work in thin layers so you never break through.
Wyoming Heart Lettering
Show your Wyoming pride with bold block lettering: a big capital I and a chunky heart across the top row, with large W and Y letters beneath. Each letter and the heart are cut fully through, so the message glows like a marquee at night. An easy lettering carve with one classic tip: tape the stencil securely and cut slightly inside the traced lines, since letters look cleaner when the strokes stay uniform in width.