Pumpkin carving templates
1159 free printable stencils. Download, print, trace, carve.
35 results · Page 1 of 1
Barred Eyes and Four Fangs
Slanted, sinister eyes are crossed by narrow uncut bars that read like glaring pupils, while the sneering mouth bares pointed fangs above and below the grin. The face is all pierced openings, and those slim bridges across the eyes are the make-or-break detail. Cut each eye in sections around its bar rather than in one pass, and save the fang notches for last so the thin points do not snap while you work.
Cat Fangs and Four Whiskers
A grinning cat face made for a black-painted pumpkin: big almond eyes with pointed ear tips, a triangle nose, four whisker slits, and a wide smile showing two tiny fangs. Every feature cuts through so the orange interior glows against the dark shell. Paint the pumpkin first and let it dry fully before transferring the pattern; carve the whisker slits last with gentle strokes so the paint edge does not chip.
Classic Twin-Fang Grin
A classic jack-o'-lantern face with sharply slanted, angled eyes and a wide sinister grin punctuated by two long fangs hanging from the upper lip. The eyes, mouth, and fang gaps are all cut clean through so candlelight pours out of every opening. The fangs stay attached as pointed flaps of pumpkin wall, so an easy tip is to cut the mouth first and shape each fang last with slow, shallow strokes.
Crouching Gargoyle Pumpkin Stencil
A crouching gargoyle with spread bat wings, a fanged open jaw, and clawed feet fills this hard pumpkin stencil. The wings are rendered as multiple angled blade-like panels, the body and head form a compact central mass, and the whole figure is composed of closely spaced pierce-throughs separated by narrow pumpkin-wall bridges. Lit from within, the gargoyle appears as a fiery orange silhouette. Begin with the head and jaw details before cutting the wing panels, since the narrow bridges connecting the wing sections to the body spine are the most structurally critical lines in this design.
Crouching Werewolf Pumpkin Stencil
A stocky werewolf crouches forward in an aggressive stance in this hard pumpkin stencil, with a spiky mane of fur bristling along its back, a snarling open-mouthed face showing sharp teeth, and thick clawed legs ready to spring. The design uses open cuts for the face interior and the gaps between the leg and body fur tufts, with solid pumpkin ridges defining each tuft shape when lit. Cut the teeth row inside the open mouth before removing the surrounding head-area cuts so the small tooth gaps remain stable.
Curved Horns and Diamond Chin
A devilish face with two curved horns sprouting from the brow, narrow slanted eyes glaring beneath them, a wide grin studded with square teeth, and a diamond goatee stamped under the chin. Every piece is cut through so the whole sinister face burns bright. A medium carve with lots of payoff; cut the horn tips slowly since their curved points are the thinnest cuts, and finish with the easy diamond chin.
Cute Bat Pumpkin Stencil
A chubby cartoon bat with pointed ears, large round hollow eyes, a small open mouth with two fangs, and wide jagged wings spread in a V-shape makes up this friendly easy bat pumpkin stencil. The wings, eyes, and mouth are all pierced through, leaving the round body as a solid center island held by the wing-edge bridges. To keep the central body from drooping inward once the wings are cut, carve each wing in two halves and leave a thin skin tab at the wingtip notches until the very last cut.
Demon Face Pumpkin Stencil
An angry demon jack-o-lantern face glares from this pumpkin stencil, its two sweeping brow-and-eye shapes angled sharply inward above a small curved nose and a wide jagged mouth bristling with pointed fangs. All five elements are cut through individually against the solid pumpkin face. Carve the two large brow-eye pieces before the mouth so the face stays rigid while you navigate the fine inward angles of each brow's inner corner.
Devil with Trident Pumpkin Stencil
A cartoon devil character stands full-body, holding a trident in one hand and sporting a curled pointed tail behind it, with two horns curving above its round head, arched eyebrows, stubby fang teeth, and small cloven-hoof feet visible below its tunic. The scattered cut pieces, including the trident tines, horns, and eyebrow slots, are separated by solid pumpkin bridges that outline each body part clearly when the jack-o-lantern is lit. Cut the three narrow trident tines first since they sit away from the body and are easiest to control while the surrounding pumpkin is still rigid.
Double Wrinkles and Fang Grin
Deeply wrinkled brows curl over narrowed eyes with rooted pupil tabs, a flared nose snarls in the middle, and a wide fanged grin full of jagged teeth completes this genuinely sinister face, flanked by small diamond cutouts at each temple. Everything is pierced through, and the layered brow wrinkles are why it rates hard. Cut the thin wrinkle slits with a fine-detail saw before the larger eye and mouth openings weaken the surrounding wall.
Dracula Pumpkin Stencil
This easy vampire pumpkin stencil shows a classic jack-o-lantern face with two arched, angry eyes sporting jagged inner cuts, a small triangular nose, and a wide curved mouth lined with sharp teeth including prominent fangs at each corner. All the facial elements are carved through as open voids, leaving the surrounding face solid. The wide-open mouth is the largest single cut; take it in two or three sections, pausing at each tooth point, to keep the thin tooth tips from snapping off.
Evil Scarecrow Pumpkin Stencil
An oversized evil face fills this scarecrow pumpkin stencil, with heavily arched crescent brows slanting inward over deep-set crescent eyes, a small heart-shaped nose cutout, and a wide grinning mouth lined with dozens of sharp, evenly spaced spike teeth. All facial features are pierced through; the pumpkin skin between them forms the cheeks, brow ridge, and lip edges. Begin with the eyebrow slashes, then the eyes, saving the spike-tooth mouth for last because those narrow points snap easily if the wall has already been weakened.
Fanged Evil Clown Pumpkin Stencil
Jagged wing-like eyes arch above a massive serrated grin packed with long, irregular fangs on this evil clown jack-o-lantern pumpkin stencil. Both eye pieces and the mouth arc are fully cut through, leaving a small heart-shaped nose sliver as the only solid detail inside the grin. The thin points of each fang are the most fragile elements: carve the broad base of the mouth opening first, then carefully nibble out each fang tip from base to point to avoid snapping them off.
Flame Crown and Hooked Eyes
Hooked, furious eyes glare beneath a crown of flame-shaped cutouts that climb the pumpkin's forehead, while a jagged mouth bristles with rows of interlocking fangs and a diamond nose burns at the center. Nearly a hundred small pierced shapes surround the face, so this is a marathon of careful knife work. Cut from the center outward and rest often; the narrow skin bridges between flames and fangs cannot take rushed strokes.
Friendly Alien Monster Pumpkin Stencil
A friendly alien monster pumpkin stencil showing a round-bodied creature with three bulging circular eyes, two small antenna balls on stalks, a wide grinning mouth with pointed fangs, and shaggy textured fur patches on its body and feet. One arm is raised in a wave while the other hangs loosely at its side. Carve the three eye circles early, since they are isolated islands that require intact pumpkin wall around them to stay in place.
Funny Monster Pumpkin Stencil
A round-bodied cartoon monster with an oversized fuzzy head, two large circular eyes, a wide fanged grin, spiky hair tufts, stubby arms raised to the sides, skinny stick legs, and round feet fills this pumpkin stencil. The creature's oval eye circles and the spaces between the arms and body are cut through, while the chunky body silhouette stays as solid orange skin. Carve the two circular eye openings and the small round nose dot at the top before cutting the body perimeter, so you can brace the knife against solid material.
Grinning Jack-o-Lantern Pumpkin Stencil
A grinning jack-o-lantern face carved within a jack-o-lantern stencil: a swirling curly stem at the top, two angled brow-cuts above a large square single-nostril eye, and a wide-open mouth whose upper lip forms a jagged row of sharp saw-tooth teeth with a single large central fang dropping from above. The mouth cavity is enormous relative to the face, giving the design its signature frenzied look. Cut the curl of the stem and the tiny eye detail first, then the saw-tooth teeth from the outer corners inward so the narrow points stay supported until the large mouth cavity is opened last.
Happy Vampire Pumpkin Stencil
A cheerful jack-o-lantern face with vampire character fills this beginner-friendly pumpkin stencil: two large arching eye openings each cradle a small solid half-moon pupil, a small heart-shaped nose cutout sits in the center, and a wide grinning mouth shows two prominent pointed fangs flanked by rows of square teeth. Each feature is a distinct pierced-through shape separated by solid pumpkin bridges. Start with the heart-shaped nose and the small pupil islands inside each eye before opening the bigger eye arches, so those internal solid pieces stay anchored while you work.
Imp Face Pumpkin Stencil
A front-facing imp face fills this hard pumpkin stencil with layered detail: two curved horns at the top, heavy arched brow pieces over wide flame-shaped eyes, pointed ear flares on each side, a snarling open mouth with jagged teeth, and a chin medallion with a forked tip. The design reads as mostly open negative space on the pumpkin, with the narrow brow bridges and the gaps between each tooth being the most fragile elements. Carve the teeth last and use a very sharp detail blade to keep each pointed gap clean without breaking the thin skin separating them.
Long-Eared Monster Face
A tall, unsettling monster mask stares out of the pumpkin: long upright ears branching like antlers, hollow ringed eyes, a skeletal snout, and a mouthful of pointed fangs, all drawn in thin interlocking cutouts. The entire face is pierced through as a network of narrow slots that leaves delicate pumpkin bridges between every glowing line. This expert design demands a fine-detail saw; carve from the center outward so the fragile bridges keep support as long as possible.
Mean Skull Pumpkin Stencil
Two large angled triangular eyes slash across the upper face of this jack-o-lantern stencil, pointing sharply inward to give the skull an aggressive, furrowed scowl. Below, two narrow rectangular fang-tips drop from the center, and a wide jagged mouth with three upward-pointing teeth stretches across the bottom. All six shapes are cut through individually, leaving solid orange between them to hold the face together. The small central fang-tips are easy to snap, so cut each one from the outer corner inward and avoid side pressure on the blade.
One-Eyed Worm Monster Pumpkin Stencil
A quirky one-eyed worm-like creature stands upright in this animals pumpkin stencil: a large circular head with a concentric inner eye ring and a crescent pupil, small antenna nubs around the head rim, a fanged grinning mouth, two tiny three-fingered arms raised at its sides, a long segmented body with ringed markings, and curling feet at the base. The thin connecting lines between head, body, and limb segments are the most fragile parts of this carving. Cut the small finger and toe tips before the body-segment cuts so the creature's extremities have maximum wall support.
Scarecrow Face Pumpkin Stencil
Two large round eyes with small eyebrow hooks above each, a pair of pointed teardrop nostrils, and a wide toothy grin with sharp downward-pointing fangs give this scarecrow face its slightly sinister character on this easy pumpkin stencil. All cut pieces are chunky and well-separated, making this a comfortable carve despite its spooky look. To keep the row of fang tips from chipping, make the two vertical cuts on each fang before the horizontal base cut that frees the piece.
Six Spoke Cyclops and Fangs
An ornate one-eyed monster dominated by a giant spoke-wheel eye with six radiating spokes, surrounded by swirling filigree flourishes, teardrop cutouts, and a vast fanged grin ringed with diamond and dot accents. The entire composition is pierced through in an intricate lattice, leaving a delicate web of pumpkin between the glowing shapes. Strictly an expert project: use a fine-detail saw, carve the small accents before the large wheel and mouth, and support the wall from inside as it thins.
Slanted Eyes and Six Slashes
A ferocious face glares out through slanted slit-pupil eyes above a fanged snarl, with three sweeping slash marks flaring from each cheek like whiskers of fury. The eyes, nostrils, toothy mouth, lower jaw slot, and all six cheek slashes are cut through the wall for a blazing, aggressive stare. At medium difficulty, save the long tapered slashes for last and cut them thin at the tips so they flick outward like real claw marks.
Slanted Eyes and Twin Fangs
A wicked jack-o'-lantern with sharply slanted eyes, a small triangle nose, and a curling grin pierced by two long fangs hanging from the upper lip. All the features cut straight through, and the fangs read as solid pumpkin left inside the glowing mouth opening. It is an easy carve overall; just remember the fangs are attached only at the top, so slice along their sides gently and never lever the knife against them.
Snarling Split-Mouth Face
This snarling jack-o'-lantern glares through slanted, angry eyes above a flared triangular nose and a huge split mouth bristling with long fangs and jagged lower teeth. The eyes, nose, and mouth are all cut through, while thin skin bridges hold each fang in place against the glow. Rated hard because of those narrow tooth bridges; carve the fangs last with a fine saw and leave extra width until the final pass.
Snarling Wolf Face Pumpkin Stencil
A wolf face stares straight forward in this hard pumpkin stencil, its large triangular ears open and pierced, its almond-shaped eyes cut through, and its muzzle parted to reveal a fanged open mouth. The fur around the face is rendered as jagged zigzag edges, and the nose bridge and cheek ruff details are a mix of solid and cut sections that read as fur texture when lit. Carve the two thin lightning-bolt-shaped brow marks above the eyes before removing the larger eye cutouts, as they are the most fragile narrow strips in the design.
Sneering Fangs and Slanted Eyes
A sinister face with narrow slanted eyes, a slim angled nose, and a wide sneering mouth bristling with pointed fangs top and bottom. Eyes, nose, and mouth are pierced clean through, with the fang shapes left as solid teeth jutting into the glowing opening. Even though it rates easy, the fang tips are fragile; cut each tooth from base to point and let the waste fall away instead of pulling it free.
T-Rex Pumpkin Stencil
A T. rex tears across this expert pumpkin stencil in a side-profile attack pose: massive jaws open wide with individual pointed teeth, a large round eye socket, muscular body sections, short forearms with clawed fingers, and powerful hind legs with three-toed feet all rendered as separate cut-through shapes. The jagged teeth line along the upper jaw is the most technically demanding element. Cut each tooth gap individually from the back of the jaw toward the snout tip, finishing the tooth row before opening the large body cavities so the wall stays rigid during the fine work.
Vampire Face Pumpkin Stencil
A close-up vampire face dominates this witch-category pumpkin stencil, featuring wide circular eyes with small pupils, a widow's-peak hairline, swept-back collar wings, and a gaping mouth with prominent fangs. The large open areas of the eyes, collar, and mouth are pierced through, while the face itself stays solid so the features read clearly when lit. Cut the two eye circles first to anchor your registration, then work outward to the collar wings before tackling the mouth and fang gaps.
Vampire Fangs Pumpkin Stencil
Three simple shapes make up this easy vampire pumpkin stencil: two large angular eye cuts that taper to sharp inner corners and a wide crescent grin with two pointed fangs hanging from the upper lip. The design is spare and confident, leaving most of the pumpkin surface solid, so the three glowing openings read as a sinister smirk from a distance. When lit, the fang tips glow brightest; cut the fangs from the inside of the mouth outward so your blade exits the shell cleanly without cracking the narrow points.
Vampire Jack-o-Lantern Pumpkin Stencil
A classic jack-o-lantern face with a vampire twist fills this pumpkin stencil: arched brows made of two angular patches over each eye, two large irregular triangular eye openings, a small v-shaped nose cutout, and a wide gaping mouth with jagged upper fangs and a rounded lower lip. All features are separate pierced-through shapes, so the candle-lit face shows glowing eyes, nose, and teeth against the solid orange pumpkin skin. Cut the small v-shaped nose notch and the two narrow eyebrow patches first so you can use the surrounding wall for leverage when carving the larger mouth and eye shapes.
Vampire Pumpkin Stencil
A snarling vampire face in three-quarter view fills this hard-difficulty pumpkin stencil, with wild flame-like hair, hollow sunken eye sockets, a sharp cheekbone, and an open fang-lined mouth all cut through as negative space. The remaining solid pumpkin flesh forms the angular features of a classic Dracula visage. Lit from behind, the empty eye sockets and open mouth glow fiercely. Carve the eye sockets and mouth interior before tackling the outer hair flames, so the face stays firmly anchored while you work the thin wispy points.
Wide-Eyed Hairy Monster
A wide-eyed shaggy monster stares out with round googly eyes, a snub nose, and a jagged fanged smirk, all framed by tufts of wild fur around the edges. The face and fur spikes are cut through in many separate openings, which is where the hard rating comes from. Carve the small fur tufts and eye rings before the large mouth, and leave the skin bridges between shapes untouched so the face holds together.