The 2026 contest winners are inGrand Prize, People's Choice and Most Creative, all crowned.
@ai_concepts
Sep 25, 2026
The Blank-Eyed Creepy PumpkinAI
0

Report this carving

Tell us what is wrong. Reports are private.

The Blank-Eyed Creepy Pumpkin

Two uneven tall oval eye holes and a small crooked crescent mouth with one chunky rooted tooth create a subtly unsettling creepy pumpkin face that is far more unnerving than a classic triangle-eyed design. The blank, uneven ovals are the source of the dread: cut one noticeably taller than the other and tilt it slightly for maximum unease. A single chunky tooth rooted along its full base at the top lip adds just enough wrongness to the otherwise simple mouth. Candlelight makes the hollow oval eyes look especially vacant.

No ratings yet · Sign in to rate
EasyFacesScaryClassic Cutout
creepy-facesfacecreepyscaryeasyblank-eyecrooked-mouthsingle-tooth

Save this design for carving night, then share a photo of your own jack-o'-lantern once it's glowing.

Comments (0)

  • No comments yet. Be the first.

Our tips for carving a similar design

The unease in this design comes entirely from deliberate asymmetry: one tall oval eye cut noticeably larger than the other, both slightly tilted. The mouth is small and understated, with a single wide-rooted tooth that adds just enough wrongness without becoming a distraction. Blank oval eyes without pupils are the key to the vacant, unsettling expression.

From pumpkin to porch

  1. Scoop and mark the center line

    Scoop to an even inch. Mark the vertical center of the face lightly in pencil, then sketch both ovals deliberately asymmetric: one taller and tilted at a slightly different angle than the other. Sketch the crooked mouth below, angled slightly off horizontal.

  2. Cut the larger uneven oval eye first

    Saw the taller oval, entering the cut from one side of the oval and working around the perimeter. Push out the plug from the inside. The larger eye is the anchor point for the whole unsettling expression.

  3. Cut the smaller tilted oval eye

    Saw the second oval, making it noticeably smaller and tilted at a slightly different angle than the first. The difference in size and tilt creates a lopsided, blank stare that reads as deeply wrong in a subtle way.

  4. Carve the small crooked crescent mouth

    Saw a small crescent, angling it slightly downward on one side for the crooked effect. Then cut the gap on one side of the single chunky tooth, leaving the tooth broadly rooted at the top lip along its full base. Keep the mouth small so it reads as a tight, reluctant expression.

  5. Refine the asymmetry

    Step back and look at the face. The more asymmetric and uneven the eyes are, the more unsettling the expression. If the eyes still look too balanced, use a detail knife to extend one eye slightly taller or tilt its lower edge further off horizontal.

  6. Light with a candle and display

    Candlelight makes hollow oval eyes look especially vacant. Place the pumpkin at eye level for maximum unease, turning the creepier tilted eye toward the most traveled path. This one works best as a subtle addition to a larger display rather than as the centerpiece.

Written with AI to match this design

Gather your supplies

Check things off as you get ready.

Work on a stable surface, keep your free hand out of the cutting path, and have an adult handle sharp tools.

Three levels of light

  • Leave intact

    All rind between and around the two eyes and the small mouth stays solid and blank

  • Peel & shade

    None, cutout only

  • Cut through

    Both uneven oval eyes, the crooked crescent mouth perimeter, and the tooth gap slot are cut through

Learn the carving basics

Before you start cutting

Why do blank oval eyes look scarier than triangle or round eyes?

Round and triangle eyes are familiar jack-o-lantern shapes that the brain categorizes as playful. Large blank ovals without pupils mimic empty eye sockets, which triggers an unease response that is more subtle and lingering than an outright scary design.

How do I cut a clean oval without the sides collapsing inward?

Enter the cut from the widest point of the oval where there is the most room for the blade to begin. Work around the full perimeter before removing the plug. Pressing on the plug from the inside with a finger as you complete the final section helps it release cleanly.

Does the chunky tooth need to be perfectly square?

No, a rounded or slightly irregular chunky tooth looks more unsettling than a precise square one. Irregular shapes reinforce the off-kilter feeling. The structural rule is that it must root broadly at the top lip: shape matters less than root width.

Your take belongs here, too.

Changed a detail? Made it simpler? Share a photo of your version and tell the community what worked.

Share your pumpkin

Want more designs like this? Browse our full library of pumpkin carving ideas, or pick a free printable stencil. Every pattern and template in our own collection is free to print at home.

More pumpkins like this

You've reached the end · 8 pumpkins
The Patch Report

Fresh pumpkins, in your inbox.

The best new carvings, ideas worth stealing, and how-tos for carving season. Short, seasonal, and gone by November.

A short email during carving season. Unsubscribe anytime. See our privacy policy.