All pumpkin stencils, A to Z
All 1,193 free printable pumpkin stencils in one list. Each pattern is a PDF template you can print at home, tape to your pumpkin, and trace for a Halloween jack-o'-lantern. Looking for a theme or skill level? Start at the pumpkin stencils hub.
1193 results · A to Z · Page 29 of 34
The Gritted Growler Pumpkin Stencil
Furrowed slash brows press down on angry eyes with squared pupil tabs, over a flat nose, cheek slits, and a wide clenched mouth divided into a grid of glowing tooth windows. Every window is pierced through, and the lattice of rind strips between them is the hard part. Cut the small mouth openings one at a time, alternating sides, so the grid never carries stress from a half finished row.
The Grumbling Oak Pumpkin Stencil
A gnarled, bare-branched haunted tree with an angry face hidden in its trunk dominates this expert-level pumpkin stencil, its dozens of thin branch tips and the snarling mouth and eye details forming an intricate web of cuts. When lit, the branching silhouette glows against the pumpkin's skin with dozens of narrow passages of light. Work from the outermost branch tips inward toward the trunk face so the stencil sheet holds its shape while you cut the trickiest inner details last.
The Happy Frenchie Pumpkin Stencil
An adorable French bulldog face with the breed's signature upright bat ears glowing at the top, round eyes, a button nose, and a tidy mustache-like muzzle with a small mouth below. The ears, eyes, nose, and muzzle are pierced openings while the skin between them shapes the flat Frenchie face. At medium difficulty the big ear panels are easy, but take care around the narrow gap between the nose and mouth so the bridge stays intact.
The Happy Molar Pumpkin Stencil
A giant molar with a split between its two roots gleams at the center, flanked by a four-point sparkle on each side and two small dot accents. The tooth outline is cut through around its lobed crown and twin roots, and the sparkles and dots are pierced as well, making a bright emblem any dentist would love. At medium difficulty, the pinch between the roots is the tightest cut, so saw into that notch from both sides and go slow.
The Happy Spouter Pumpkin Stencil
A happy whale rides curling waves while a fountain spout bursts from its blowhole, all rendered in shaved relief. No holes are pierced; you strip the skin inside the whale, spout, and wave scrolls, then shave the belly grooves and tail a little deeper for contrast. Work the long body curves first and save the thin spout droplets and wave tips for last, when your tool control is warmed up.
The Hollow Gaze Pumpkin Stencil
A hooded Grim Reaper face looms from within a tattered, wind-swept cloak in this expert pumpkin stencil, its skull face showing deep-set eye sockets, a skeletal nose cavity, and rows of exposed teeth, all surrounded by jagged cloak edges that dissolve into flame-like wisps at the bottom. Dozens of small cuts through the cloak fabric, face, and shroud edges create a complex web of glowing gaps. Tackle the most crowded area, the teeth row, first when your hands and the pumpkin are both fresh, then spiral outward to the cloak wisps.
The Hypnotist Pumpkin Stencil
Two enormous hypnotic eyes built as spoked wheels, each iris divided by radial spokes around a glowing hub, ringed by halos of small diamond and teardrop cutouts with arched brow fans above. Every spoke gap, diamond, and teardrop is pierced individually, creating a mesmerizing lace of light. An expert carve with dozens of tiny openings; use a fine detail saw and rotate the pumpkin, not your wrist, on the curves.
The Ivory Smile Pumpkin Stencil
Two tall triangle eyes and a wide open smile with a single pointed upper notch make up this timeless jack-o'-lantern face, shown here glowing warmly from an ivory white pumpkin. Every shape is a straightforward cut-through with no attached pieces to protect. It is as easy as carving gets: make long straight cuts for the triangles and let the knife follow the smile's curve in smooth strokes, and it looks brilliant on white or orange pumpkins alike.
The Jagged Jester Pumpkin Stencil
An ornate expert-level face framed by a full ring of small triangle cutouts circling the pumpkin, with chevron-crested brows, barred flame-shaped eyes, a diamond nose, and a huge jagged grin holding fourteen zigzag teeth. Everything pierces through, so the finished lantern sparkles from every angle like carved lace. Plan your order: punch the border triangles first while the wall is rigid, then work inward, saving the long fragile grin for the very end.
The Jagged Menace Pumpkin Stencil
A fierce horror face made of three bold shapes: two sharply slanted eyes that hook downward like angry slashes, and a wide zigzag mouth full of jagged points. Everything is cut through, so the whole face blazes with candlelight and reads clearly from the street. It is an easy carve despite the menacing look; use long straight cuts for each zigzag segment and the aggressive angles practically draw themselves.
The Jolly Chomper Pumpkin Stencil
Two chunky triangle eyes sit above a broad zigzag grin, where five blocky teeth alternate along the top and bottom of the smile. Everything cuts fully through, and the oversized features make this a great pick for a big pumpkin that needs to be seen from a distance. Carve the mouth as one long opening and leave each tooth attached to the rim, sawing the tooth notches last so they stay sturdy.
The Knowing Grin Pumpkin Stencil
An elaborate theatrical face with knowing eyes whose pupils hang from the upper lids, framed by ornate teardrop flourishes across the brow and temples, above a huge grin packed with long individual teeth. Dozens of small cut-through openings build the pattern, with slim rind bridges holding every tooth and swirl in place. Number your openings and remove the smallest flourishes first, saving the big mouth bays for last so the web of bridges keeps its strength.
The Laughing Squint Pumpkin Stencil
A joyful jack-o'-lantern with two happy crescent arch eyes, curved like eyes squeezed shut in a laugh, above a wide smile interrupted by two square teeth hanging from the upper lip. The eye arches and mouth are cut through while the two teeth remain as attached blocks of pumpkin wall. An easy, forgiving carve: cut the mouth outline first, then carefully saw around each square tooth so its corners stay crisp.
The Lone Tooth Pumpkin Stencil
Two tall rounded eyes of slightly different sizes sit high on the pumpkin above a small off center smile holding one square tooth. Only three openings get cut, which keeps this easy pattern quick and friendly rather than frightening. Leave the little tooth attached by carving carefully around it inside the mouth opening, and save the smaller eye for last while your blade is warmed up.
The Lovestruck Grin Pumpkin Stencil
Two big heart shaped eyes with curling lash accents beam above a small triangle nose and a wide grin broken by three square teeth. Every shape is cut all the way through, so candlelight pours out of the hearts and the toothy smile. Take the lash flicks slowly with a fine saw, since those narrow tips are the only fiddly part of this medium design.
The Lucky Catch Pumpkin Stencil
A side-view fish with rayed fins, a forked tail, and a dot eye, drawn in bold etched lines across the pumpkin's face. The wall stays intact everywhere: you shave the skin along the body outline, fin rays, and gill lines so they read as bright strokes against dark rind. For this medium shading design, use a small loop tool and keep your line width consistent, since the fin rays lose definition if they blur together.
The Mad Scientist Pumpkin Stencil
A triangular Erlenmeyer flask and a round boiling flask stand side by side while five bubbles of different sizes rise between and above them. Every flask body and bubble is cut straight through, so the whole experiment glows like it is mid reaction. This easy pattern only asks for patience on the small bubbles; a drill bit or corer makes those circles fast and perfectly round.
The Meltdown Pumpkin Stencil
A wicked jack-o'-lantern with two swept, flame-like eyes, a small notched nose, and an enormous melting grin whose edges drip and ripple across the lower half of the pumpkin. All features are pierced through, and the wavy mouth throws dramatic, uneven light. This is medium work with one long tricky opening, so carve the mouth in sections from the center out and leave the drippy lower points attached until the very end for support.
The Merry Molar Pumpkin Stencil
A giant molar glows from the pumpkin, complete with its two rounded roots at the bottom, while three little dots trail beneath it like polish sparkles. The tooth is one large cut-through opening, so the only tricky spot is the notch between the roots. Cut that inner V last, after the big outline is free, and this becomes a quick, hilarious carve for any dental office porch.
The Midnight Glare Pumpkin Stencil
Two fierce glowing eyes under sharply slanted brows, and nothing else. The eye shapes are cut clean through while the rest of the pumpkin stays untouched, so all the menace comes from those two narrow slits of light. The thin points where each brow meets the eye are the only tricky part; cut toward the wide end of each shape so the tips stay crisp. A fast, dramatic carve when time is short.
The Midnight Reaper Pumpkin Stencil
A shrouded Grim Reaper grips a scythe overhead in this expert-level pumpkin stencil, packed with dozens of jagged, flowing cut sections that render tattered robes, bony fingers, a skull face peering from the hood, and a second smaller skull on the chest. The design reads as a dense web of orange skin bridges surrounding numerous glowing cutouts. Tackle the smallest interior cuts around the skull face first so you have full stencil support, then work outward through the robe details toward the large robes and scythe blade.
The Mighty Pout Pumpkin Stencil
Two drooping teardrop eyes slump toward a broad downturned crescent frown, giving this pumpkin the most theatrical pout on the block. All three features are pierced through, and the big simple shapes make it an easy carve with instant comedic payoff. Angle each teardrop eye so both tips point down and outward, and cut the frown from the middle toward each raised corner to keep the curve even.
The Modern Muse Pumpkin Stencil
An abstract face in a modern-art style: a sweeping brow arc crosses the top, a long straight nose drops down the middle, curled spiral shapes form the cheeks, and short hatch marks add texture beside one eye. Each line is a pierced channel, so the portrait glows as a set of elegant strokes. At hard difficulty the narrow curved channels are the challenge; keep them at least a finger-width and undercut the edges slightly so light spreads.
The Muddy Paw Pumpkin Stencil
A giant dog paw print glows from the pumpkin: four oval toe openings arc above one broad rounded pad, five simple pierced shapes in all. There are no bridges or fine details, making this a perfect quick carve for pet lovers and first-timers. Trace the pad first and cut it in one continuous pass, then space the toe ovals evenly so the print looks like it stepped straight onto the pumpkin.
The Mystic Gaze Pumpkin Stencil
Two huge almond eyes stare straight out, each ringed by fanned lash bars above and a spray of teardrop cuts below, with attached pupils floating in the centers. The eye whites, brow strokes, and roughly twenty teardrops are all pierced, leaving the pupils and lash ribs as connected shell. This one earns its hard rating on the thin lash bars, so cut every slot outward from the eye and support the wall with your palm.
The Patch Original Pumpkin Stencil
The most traditional face in the patch: two triangle eyes, a triangle nose, and a wide smile interrupted by two square teeth rising from the lower lip. All five shapes cut straight through with no curves to fight, making this an ideal first carve. Push the saw in straight vertical strokes and finish each triangle corner cleanly from both sides before popping the piece out.
The Patient Mantis Pumpkin Stencil
A praying mantis poses in elegant line art, from its long antennae and triangular head down through folded forelegs and dramatically bent back legs. The design is etched, not pierced: every line is a shallow groove shaved through the skin so the insect glows as thin golden strokes. Hard-level patience pays off here; keep your groove width consistent along the spindly legs and antennae so no single line reads heavier than the rest.
The Porch Classic Pumpkin Stencil
The timeless jack-o'-lantern: two bold triangle eyes, a matching triangle nose, and a wide friendly smile with two square teeth breaking the curve. Every feature is cut fully through, leaving the rest of the pumpkin smooth so the glowing shapes do the talking. Straight lines make this an ideal easy carve; score the triangles with a ruler edge first and the cuts will fall right in place.
The Postcard Grin Pumpkin Stencil
Arched triple line brows curl above big eyes divided by rind bars, a long triangle nose drops between them, and a huge grin shows a full row of rounded teeth with dotted curlicue accents swirling at each cheek. All the openings are cut through in a cheerful retro style straight off an old holiday postcard. Rated hard for its many small dots and thin brow lines, it rewards a fine detail saw and a drill for the dots.
The Quiet Cottontail Pumpkin Stencil
A seated rabbit in profile with two tall split ears, a rounded back, and tucked front paws, cut through as a nearly single silhouette with slim gaps defining the ears and feet. The shell around the bunny stays whole so the glowing shape reads crisply from a distance. Carve the narrow gap between the ears first; it is the finest cut on an otherwise smooth outline.
The Quiet Gasp Pumpkin Stencil
The most minimalist face possible: two small round eyes and a single oval mouth, placed low on a tall pumpkin so the blank rind above becomes part of the joke. Just three quick cut-through holes and the carve is done, which makes this a genuine five-minute project. Keep the openings small and evenly spaced; on such a spare design, clean placement is what sells the look.
The Radiant Daisy Pumpkin Stencil
Eight almond-shaped petals radiate around a solid center in this graceful flower design, with a pair of pointed leaves below and small accent holes dotting each side like falling seeds. All the petals, leaves, and dots are pierced through while the round flower center stays intact, held by the uncut spokes between petals. For this medium carve, cut opposite petals in pairs as you work around the circle so pressure stays balanced and the center never loosens.
The Rugged Woodsman Pumpkin Stencil
A bearded man shown from chest up is rendered in this expert pumpkin stencil with fine portrait linework: tousled spiked hair, narrow cut-out lines for expressive eyes with visible irises, a trimmed goatee built from small isolated patches, an open jacket collar, and a table or surface line at the bottom. The face relies on dozens of thin pumpkin bridges to hold the portrait together, creating a detailed likeness when lit. Carve the small goatee patches and eye details first, before the larger jacket and background cuts are made, to keep the face area stable throughout.
The Scaled Fury Pumpkin Stencil
A ferocious mask of a face with slanted furious eyes, a flared nose, and a jagged mouth full of interlocking fangs, all framed by dense rows of diamond and wedge cutouts that cover the cheeks and brow like scales. Every diamond, wedge, and fang is pierced through, turning the whole front into a lattice of fire. This expert pattern demands order: carve from the center outward so surrounding cuts never weaken your working area.
The Scarred Snarl Pumpkin Stencil
A nightmare grin stretches ear to ear, packed with dozens of jagged interlocking fangs, beneath two mismatched eyes, one wide and wild and one narrowed and crossed by scar lines, with flame like spikes radiating outward and diamond accents above and below. Nearly all of it is pierced through, leaving a web of thin rind spikes that demands real patience. Work from the center of the mouth outward with a fine saw, supporting each fragile spike as you free it on this expert carve.
The Serrated Smile Pumpkin Stencil
This wicked traditional face stacks barred triangle eyes with heavy slanted brows above a huge serrated grin, then flanks the mouth with rows of small wedge and diamond accents across both cheeks. Everything is cut through, and the eye bars are thin strips of shell left inside each triangle. Cut on both sides of each eye bar before removing the surrounding pieces, and save the tiny cheek diamonds for last.