All pumpkin stencils, A to Z
All 1,193 free printable pumpkin stencils in one list. Each pattern is a PDF template you can print at home, tape to your pumpkin, and trace for a Halloween jack-o'-lantern. Looking for a theme or skill level? Start at the pumpkin stencils hub.
1193 results · A to Z · Page 6 of 34
Cross Pumpkin Stencil
A large rugged cross pumpkin stencil with slightly tapered arms and a weathered, hand-drawn outline that gives it an organic, aged character rather than a rigid geometric look. The entire cross shape cuts through as a single opening, and because the arms are wide, the resulting jack-o-lantern casts a bold cross-shaped beam of light. A cross this size removes a substantial amount of shell, so thin the interior pumpkin wall to about half an inch before carving to reduce the risk of the outer edges cracking under the weight of the cut.
Cross-Eyed Chomper Pumpkin Stencil
Huge crossed googly eyes sit under raised brow slots while a gaping oval mouth shows off two goofy buck teeth, with freckle dots on each cheek. The eyes, brows, mouth, and dots are all pierced through, and the dark pupils and teeth are rind left attached inside the openings. Those attached pupils and teeth are the tricky bit; cut around them slowly and leave their connecting bridges generously wide.
Crossed Hockey Sticks and Puck
Two hockey sticks cross in a big X with taped blades angled outward and a puck resting between them at the bottom. This shaded design is carved on a continuous wall, shaving the sticks and puck out of the skin so they glow without any pierced holes, and the blade tape lines stay as raised strips. Keep your shave depth even along both shafts so the long straight lines light uniformly from top to bottom.
Crossed Hockey Sticks Pumpkin Stencil
Two crossed hockey sticks dominate this jack-o-lantern stencil, their long shafts forming an X at center with the curved blade ends fanning out left and right; a small round puck sits below the crossing point. The stick shafts are cut as long thin negative spaces flanking the solid X-shaped pumpkin skin bridge, and each blade features short hatching cuts that add texture on the lit pumpkin. Leave the central skin bridge where the two shafts cross untouched last so the structure stays rigid while you complete the outer blade details.
Crouching Gargoyle Pumpkin Stencil
A crouching gargoyle with spread bat wings, a fanged open jaw, and clawed feet fills this hard pumpkin stencil. The wings are rendered as multiple angled blade-like panels, the body and head form a compact central mass, and the whole figure is composed of closely spaced pierce-throughs separated by narrow pumpkin-wall bridges. Lit from within, the gargoyle appears as a fiery orange silhouette. Begin with the head and jaw details before cutting the wing panels, since the narrow bridges connecting the wing sections to the body spine are the most structurally critical lines in this design.
Crouching Spider Pumpkin Stencil
A large eight-legged spider crouches in full top-down view on this easy Halloween pumpkin stencil, its oval abdomen and round cephalothorax left as solid orange while all the space between the angled legs is pierced through. Eight legs radiate outward and slightly downward from the body, each tapering to a point. The gaps between legs are the cut areas, so work around the spider methodically to avoid accidentally snapping any single leg at its thinnest point near the body junction.
Crouching Werewolf Pumpkin Stencil
A stocky werewolf crouches forward in an aggressive stance in this hard pumpkin stencil, with a spiky mane of fur bristling along its back, a snarling open-mouthed face showing sharp teeth, and thick clawed legs ready to spring. The design uses open cuts for the face interior and the gaps between the leg and body fur tufts, with solid pumpkin ridges defining each tuft shape when lit. Cut the teeth row inside the open mouth before removing the surrounding head-area cuts so the small tooth gaps remain stable.
Crown of Horns Triceratops Pumpkin Stencil
A proud Triceratops framed by its crown-like frill and three horns. Print the detailed cut-through stencil with a feature-by-feature carving guide.
Cruise Ship Pumpkin Stencil
A large cruise ship viewed from a slight bow-angle fills this hard pumpkin stencil. Four tall rectangular smokestacks rise from the upper deck, the bridge superstructure runs along the top, and five circular portholes line the hull below the waterline. The design reads as a series of rectangular and circular cutouts separated by solid pumpkin strips. When lit, the port holes and superstructure windows glow individually like a ship at sea. Carve the five round portholes first since circular cuts benefit most from a fresh blade, then work upward through the rectangular deck openings.
Cruising Hammerhead Pumpkin Stencil
A hammerhead shark cruising in full profile, its wide flattened head, tall dorsal fin, and forked tail all reading instantly in silhouette. The complete shark is one cut-through opening that stretches across the pumpkin's widest face for a dramatic glowing display. An easy carve with one caution: the slim notch between the tail forks is delicate, so cut it before removing the large body piece.
Crying Emoji Pumpkin Stencil
A round emoji pumpkin stencil depicting the loudly crying face: a circular head with a wrinkled brow, two oval eyes, a large open mouth turned sharply downward, and a dramatic flood of tears pouring from both eyes that bleeds into the surrounding circular border. The tear streams are wide and bold, merging with the outer ring cutout to form one large continuous opening at the bottom of the circle. The small raised brow wrinkle between the eyes is a thin floating island; anchor it with petroleum jelly on the inner wall before cutting the surrounding face away.
Crypt Crawler Pumpkin Stencil
A gaunt zombie figure lurches upright in this jack-o-lantern pumpkin stencil, its hollow skull face and long clawed fingers pierced through while ragged, tattered robes form the solid silhouette below. Scattered debris fragments float around the body as isolated cut-out shapes, creating an eerie sense of motion when lit. Carve the small floating fragments last, using a narrow detail blade to keep each piece from cracking away from the main composition.
Curly the Kitten Pumpkin Stencil
A friendly cat face built from simple shapes: two pointed ears with inner triangles, big oval eyes, a tiny triangle nose, a curled smile, and three long whiskers sweeping out from each cheek. Every element is cut through, so the whole face lights up at once. The whiskers are just narrow slits, which is why kids can manage this one; poke each slit through with the tip of the saw and lengthen it slowly.
Cute Bat Pumpkin Stencil
A chubby cartoon bat with pointed ears, large round hollow eyes, a small open mouth with two fangs, and wide jagged wings spread in a V-shape makes up this friendly easy bat pumpkin stencil. The wings, eyes, and mouth are all pierced through, leaving the round body as a solid center island held by the wing-edge bridges. To keep the central body from drooping inward once the wings are cut, carve each wing in two halves and leave a thin skin tab at the wingtip notches until the very last cut.
Cute Skull Pumpkin Stencil
A cute, stylized skull face looks straight out of this beginner pumpkin stencil, with two large round eye sockets and a small triangular nose cut through, all enclosed in a rounded skull outline broken into arc segments. The lower jaw shows four chunky teeth separated by gaps, and small curved cheekbone accents frame the face. Because the skull outline is split into separate arcs rather than one continuous ring, carve each arc segment individually so the gaps between them stay crisp.
Cute Starfish Pumpkin Stencil
A stylized starfish with five rounded arms and a cute cartoon face, including two large round eyes with small lashes, a button nose, and a gentle smile, sits symmetrically centered in this hard pumpkin stencil. The arm openings and facial features are cut through while the narrow bands between the arm segments stay solid, framing the starfish shape clearly when lit. The thin band between the two eye holes is the most vulnerable bridge; cut the right eye last so you can brace the section from both sides during that final cut.
Cyclops Monster Pumpkin Stencil
This one-eyed monster face jack-o-lantern stencil pairs a massive single eye opening at the top, with a crescent of solid orange forming the pupil island, with a lower face panel bearing a triangular nose and a wide blocky grin of square teeth. Both sections are fully cut through, flooding the pumpkin face with light. Keep the thin orange strip separating the upper eye section from the lower mouth panel intact as a structural bridge until the very last cut.
Dachshund Pumpkin Stencil
A plump dachshund puppy stands in profile in this dog pumpkin stencil, its low-slung long body, droopy ears, and upturned tail captured as a single solid silhouette cut entirely through the pumpkin wall. Lit from within, the whole shape glows as a warm, simple dog outline. Because the design is one unbroken cutout, start at the ear tip and work the blade continuously along the outline to avoid restarting cuts that could create visible notches in the smooth edge.
Dachshund Silhouette Pumpkin Stencil
A dachshund in profile fills this easy dog pumpkin stencil, its long low body, short front and back legs, small rounded head, and thin tail all rendered as a single clean silhouette. The entire dog shape is cut away as one open piece, so the lit jack-o-lantern casts a bright dachshund outline against the orange pumpkin wall. The tail tapers to a fine point at the top, so finish that cut last with a single smooth stroke rather than sawing back and forth, which can tear the thin tip.
Dachshund with Bone Pumpkin Stencil
A long-bodied dachshund trots across the pumpkin as one big glowing silhouette, with a dog bone floating above and a row of four oval accents below like little paw steps. The dog, bone, and ovals are all pierced through, so the whole scene lights up brightly with just a handful of cuts. Start with a hole in the dog's belly and saw outward, taking the thin legs and tail slowly so they stay crisp.
Dancing Girl Pumpkin Stencil
A small cartoon girl with a ponytail stands with arms spread wide in this pumpkin stencil, her entire silhouette carved as a single large opening surrounded by six small four-petal flower cutouts scattered around her. The figure and each flower are separate pierced-through shapes, so the finished jack-o-lantern shows a glowing girl dancing among floating blooms. Cut the six small flower shapes first so the surrounding pumpkin wall absorbs tool pressure before you open the larger central figure.
Dapper Bones Pumpkin Stencil
A cartoon skeleton in a bowler hat tips its hat with one bony hand while its round skull grins with simple triangular nose and dot eyes on this Halloween pumpkin stencil. The ribcage, arm bones, and pelvis are each rendered as small separate cut islands surrounded by pumpkin skin. Because the design is built from many floating cutout islands, carve the larger open bone shapes in the torso before tackling the small finger and toe segments, so the pumpkin stays structurally sound while you work the finer extremities.
Dapper Devil Pumpkin Stencil
A devilish face with two curved horns sprouting from the brow, narrow slanted eyes glaring beneath them, a wide grin studded with square teeth, and a diamond goatee stamped under the chin. Every piece is cut through so the whole sinister face burns bright. A medium carve with lots of payoff; cut the horn tips slowly since their curved points are the thinnest cuts, and finish with the easy diamond chin.
Darwin Fish Pumpkin Stencil
The iconic Darwin fish emblem fills this pumpkin stencil as a horizontal fish silhouette with small walking legs at the bottom, the word DARWIN lettered inside the body using bold block capitals separated by vertical post bridges. Both the fish background and the letter interiors are cut through, so the orange bridges spelling out DARWIN glow as solid bars when lit. Carve the background fish outline opening first, then cut each letter interior separately to keep the thin vertical bridges from flexing and cracking.
Dashing Dachshund Pumpkin Stencil
A full-body dachshund silhouette trots across the pumpkin, long low back, floppy ear, upturned tail, and short legs all captured in one clean glowing shape. The entire dog is removed as a single cut-through, so light floods the whole outline. This easy design has just one tricky zone: the narrow gaps between the legs. Cut the big body outline first, then carve carefully around each leg so the slim wall strips between them survive.
Deep Sea Dancer Pumpkin Stencil
A tilted jellyfish drifts with its domed bell up high and dozens of ribbony tentacles flowing down through strands of seaweed, while small bubbles rise around it. Every element is shaved into the skin at varying depths rather than cut through, creating layers of soft glow. This expert etch is all about depth control: shave the bell and bubbles deepest for brightness, keep the tentacles mid-depth, and leave the seaweed shallow so the jellyfish floats forward.
Deep Sea Drifter Pumpkin Stencil
A dramatic jellyfish drifts down the tall face of the pumpkin, its ribbed bell crowning a tangle of long ribbon tentacles surrounded by fifteen bubbles of varying size. Everything is shaved relief with no pierced holes, and the overlapping tentacles at different depths are what make it an expert etch. Vary your shaving depth deliberately, deepest where tentacles cross behind others, to build the layered, flowing effect.
Deep Sea Sculpt Pumpkin Stencil
A sculptural hammerhead shark carved in raised relief, with the background cleared away so the body, fins, and curved tail stand proud of the wall in layered depths. Fin edges, the mouth line, and gill grooves are incised for realistic detail while nothing pierces through. Rough out the background to one even depth before shaping the shark itself, and keep at least half the wall thickness so the raised body stays sturdy.
Deep Space Dream Pumpkin Stencil
A sweeping spiral galaxy wraps across the entire pumpkin face, its curved arms shaved in graduated depths so the core glows brightest, while three ringed planets and scattered stars orbit the edges in raised relief. Nothing is pierced; every effect comes from continuous-wall shading at different thicknesses. Expert-level patience pays off here: establish the spiral arms as broad shallow bands first, then deepen toward the center in passes to build the luminous gradient.
Deer Trail Pumpkin Stencil
Two split deer hoofprints, each with a pair of dewclaw dots beneath, share the pumpkin with a lobed oak leaf and a few scattered accent dots for a woodsy, cabin-porch feel. Every track, dot, and the leaf is fully cut through with plenty of solid skin between elements. It is a comfortable medium carve; poke a starter hole in each small dot and cut those first, since tiny circles are easiest while the surrounding wall is still rigid.
Delaware Pumpkin Stencil
The outline of Delaware is cut through as a single solid-edged silhouette in this state pumpkin stencil, its distinctive narrow rectangular body with the curved northeastern arc at the top rendered cleanly in one piece. When lit, the entire state shape glows as an open window of light. Because this is a single large cut-out with no interior detail, position the shape toward the center of the pumpkin face and use a sharp saw blade to follow the curved northeastern border without tearing.
Delaware State Shape
Delaware's tall, slender silhouette runs nearly the full height of the pumpkin, from its narrow northern arc down to the curved coastal bulge along Delaware Bay. The entire state shape is a single cut-through opening that lights up as one bright column. Because the shape is tall and thin, cut the long straight western border last so the panel stays supported while you saw out the curvier eastern coastline.
Demon Face Pumpkin Stencil
An angry demon jack-o-lantern face glares from this pumpkin stencil, its two sweeping brow-and-eye shapes angled sharply inward above a small curved nose and a wide jagged mouth bristling with pointed fangs. All five elements are cut through individually against the solid pumpkin face. Carve the two large brow-eye pieces before the mouth so the face stays rigid while you navigate the fine inward angles of each brow's inner corner.
Demon Tree Pumpkin Stencil
A demonic tree creature roars from this expert pumpkin stencil: a gnarled trunk rises from spreading roots, branching into twisted limbs with curling twig tendrils, while a menacing face with jagged saw-tooth teeth and hollow eye cavities glares from the center. Dozens of thin, curving cut sections radiate outward, separated by very narrow orange bridges. Work from the outermost twig tips inward toward the central face to avoid snapping the thin outer branches while the interior is still supported.
Desert Cactus & Sun
A tall saguaro cactus with two upturned arms stands over small desert dunes while a round sun hangs in the upper corner. The cactus body, sun disc, and low mound shapes are all cut out completely so candlelight pours through the whole scene. Cut the big cactus trunk first, then the sun, and save the thin dune slivers for last so the wall stays sturdy while you work.
Desert Sentinel Pumpkin Stencil
A tall saguaro cactus rises up the pumpkin with two curving arms set at different heights, one reaching high and one bent low. The entire cactus is a single pierced cutout, so the whole plant glows as one bold desert silhouette. This easy design has no fiddly interior pieces; just take the inside curves of the arms slowly so the elbow bends come out smooth rather than angular.