All pumpkin stencils, A to Z
All 1,193 free printable pumpkin stencils in one list. Each pattern is a PDF template you can print at home, tape to your pumpkin, and trace for a Halloween jack-o'-lantern. Looking for a theme or skill level? Start at the pumpkin stencils hub.
1193 results · A to Z · Page 18 of 34
Midnight Wings Pumpkin Stencil
Three flying bats cross a crescent moon above a rooftop. Download this pumpkin stencil with a visual cutout key and feature-by-feature instructions.
Midnight Wingspan Pumpkin Stencil
A bird bursts forward with both wings spread wide, every flight feather notched along the wing edges, above a fanned notched tail. The whole spread-wing shape is one dramatic cut-through, so the bird blazes as a single figure of light. Rated medium because of the many feather notches along the wingtips; cut the main body opening first, then nibble out each feather notch with short strokes so the points stay defined.
Mini Mew Pumpkin Stencil
A sweet cat face scaled for small pumpkins, with almond eyes topped by pointed ear notches, a tiny triangle nose, a crescent smile, and two slender whiskers flaring from each cheek. Everything cuts fully through, and the shapes are simple and forgiving. The whiskers are the only delicate part; cut each one as two long strokes meeting at the tip instead of dragging the saw sideways through the narrow slit.
Minnesota Pumpkin Stencil
Minnesota's outline appears in this pumpkin stencil as a broad near-rectangular shape with a small protrusion extending to the upper left for the Northwest Angle and a gentle scalloped northern border that traces the lake-country edge. The entire state silhouette is carved as one open cutout, and the smooth southern and western borders contrast with the more irregular northern and eastern edges. The Northwest Angle nub is a small isolated tip connected by a narrow strip, so cut that corner carefully before removing the main body to prevent it from tearing loose.
Minnesota State Shape
The full outline of Minnesota carved as one glowing state-shaped window, from the flat southern border up to the jagged Arrowhead along Lake Superior. The entire silhouette is cut through in a single piece, leaving the surrounding pumpkin wall to frame it. Take your time on the notched northeast shoreline, sawing gently along each small zigzag, and pop the big piece out in sections rather than all at once.
Mismatched Eyes Pumpkin Stencil
A goofy lopsided face with one big round eye and one square eye, a small triangle nose, and a huge open smile interrupted by two buck teeth hanging from the upper lip. All shapes are cut fully through, and the mismatched eyes do all the comedic work. An easy, forgiving carve for kids and beginners; cut the smile last and leave the two tooth tabs of rind attached so they dangle into the glow.
Mississippi Pumpkin Stencil
This pumpkin stencil cuts the outline of Mississippi as a single solid silhouette pierced entirely through the pumpkin wall. The western border is the most distinctive feature: a deeply notched, step-like edge tracing the course of the Mississippi River, while the right side drops in two clean vertical lines. Lit from inside, the whole state shape glows as one open window. Start your cuts along the jagged river edge, working in short strokes to keep each notch crisp.
Mississippi State Shape
Mississippi's tall rectangular profile carved as one bold cutout, complete with the wiggly river border on the west side and the small boot notch at the Gulf. The whole state is removed to glow, and the surrounding rind stays intact as the frame. A medium carve where the river edge does most of the work; saw those little curves slowly and leave the long straight eastern border for your final cut.
Missouri Pumpkin Stencil
Missouri's broad, roughly rectangular shape fills this pumpkin stencil with a satisfying silhouette. The northern edge is nearly flat, the eastern side curves gently, and the lower-right corner sports the distinctive Missouri Bootheel notch with its stepped extensions reaching down and right. Carved through as a single open shape, the state glows cleanly on a lit jack-o-lantern. Carve the squared main body first, then finish the small Bootheel extensions carefully to avoid snapping those narrow protrusions.
Missouri State Shape
The unmistakable outline of Missouri, complete with its bootheel corner, carved as one large glowing state silhouette. The entire state shape is cut fully through the wall, so the opening blazes with candlelight and reads clearly from across the yard. At medium difficulty the main challenge is the wiggly eastern river border, so follow those small curves slowly with a fine saw and remove the big waste piece in sections.
Modern Mosaic Pumpkin Stencil
Nine triangles in alternating sizes form a tidy three-by-three grid, with six small round dots tucked into the gaps between rows. Each triangle and dot is cut straight through, producing a clean modern lantern that glows like patterned tilework. This medium design is all about alignment, so tape the template securely, transfer every corner point before cutting, and carve the triangles row by row to keep the grid looking sharp and even.
Monster Tree Pumpkin Stencil
A menacing anthropomorphic tree creature with clawed outstretched arms, a roaring jagged-toothed mouth, and swirling branch-tentacle hair stands silhouetted inside a large circular moon in this expert pumpkin stencil. The entire moon disc interior is cut away and glows with light, while the creature silhouette and the area outside the moon ring remain as solid pumpkin skin. The swirling hair tendrils at the top create the finest detail against the glowing backdrop. Cut those wispy curling tips before clearing the large moon interior, to avoid cracking the delicate spiral ends once the surrounding wall is weakened.
Monster Truck Pumpkin Stencil
A side-view monster truck with massive knobby tires dominates this expert pumpkin stencil: two oversized wheels with five-spoke rims, a high-clearance suspension chassis visible between the tires, a boxy cab with window cutouts, a wide front bumper, and flame or dragon graphics on the door panel. The many narrow bridges connecting the chassis rails and the spoke details inside each wheel make this a demanding carve. Cut the interior cab windows and bumper slots first, then tackle the five spokes of each wheel one at a time, always working away from the thin axle hub at the center.
Montana Pumpkin Stencil
Montana's wide, nearly rectangular silhouette makes this an approachable pumpkin stencil for beginners. The top and right edges are almost straight, while the left side carries the state's characteristic jagged, glacier-cut western border that dips in irregular steps down toward the southwestern corner. A small panhandle-like indent near the bottom center adds the final identifying detail. Carving the whole shape as a single open cut lets the jack-o-lantern glow brightly; trace the western zigzag border slowly with a detail blade to keep those steps sharp.
Montana State Shape
Montana's wide rectangular body glows as a single cut-through opening, with the jagged Rocky Mountain border rippling down the state's western edge. The long straight top and eastern sides carve quickly, so most of your care goes into that zigzag left border. Cut the straight runs first to free the bulk of the shape, then nibble out each notch of the mountain boundary with short, controlled strokes.
Moon & Stars Over Hills
A crescent moon hangs over a band of rolling hills while four small stars dot the sky above. Nothing is pierced: you shave away only the skin inside the moon, stars, and hill line, leaving a thin wall that glows soft amber when lit. Keep your shaving depth even, about a quarter inch, so the moon and hills light up at the same brightness across the whole scene.
Moon and Stars Pumpkin Stencil
A slim crescent moon curves on the left side of this space pumpkin stencil while seven five-pointed stars of varying sizes are scattered across the open field to its right, all shapes cut through as separate glowing elements. The smallest stars are only an inch or so across and sit as isolated islands on the pumpkin face; carve those tiny stars first with a craft knife tip or small saw while the wall is at full stiffness, then remove the larger crescent and remaining stars in order from smallest to largest.
Moonbeam Fan Pumpkin Stencil
A tall crescent moon anchors the left side of this celestial design while a fan of seven teardrop rays arcs around its open curve like scattered moonbeams. Every shape is pierced through, so the crescent throws a big wash of light and the teardrops sparkle around it. Cut the crescent first for this medium design, then do the teardrops smallest to largest; angling your saw slightly outward makes each little petal pop out cleanly.
Moonbeam Smiler Pumpkin Stencil
A cheerful jack-o'-lantern face with sweeping crescent eyes, a small notched nose, and a wide grin framed by two pointed fangs and blocky lower teeth. Every feature is cut fully through so the whole face glows. The crescent eyes taper to fine points, so use a thin saw and cut toward the tips from both directions to keep the corners crisp.
Moonbeam Sparkle Pumpkin Stencil
A large crescent moon anchors the center while six diamond sparkles and a scattering of small round dots twinkle around it, turning the whole pumpkin into a patch of night sky. Every moon, diamond, and dot is a separate pierced opening, so the pattern wraps light in all directions. Carve the crescent first, then the diamonds from largest to smallest, using a drill or apple corer for the tiny circles.
Moonbeam Unicorn Pumpkin Stencil
A graceful unicorn head in profile, complete with a spiral horn, an alert ear, and a flowing mane that ends in four swooping points down the neck. The whole silhouette is cut through as one large opening, so the entire unicorn glows against the dark pumpkin. It is an easy carve despite its size; remove the big piece in two or three sections instead of forcing it out whole.
Moonlight Drifter Pumpkin Stencil
A ribbed jellyfish bell hovers near the top of the pumpkin, trailing eight long wavy tentacles that flow all the way to the base, with small bubbles rising on either side. The bell segments and tentacles are shaved to glowing flesh while thin strips of dark skin separate every ribbon, and the bubbles are pierced through. This expert shading design demands a steady hand; work each tentacle top to bottom in one continuous peel so the curves stay smooth and evenly lit.
Moonlight Ride Pumpkin Stencil
A classic Halloween silhouette of a witch on a broomstick crossing a full moon fills this pumpkin stencil. The large circle is carved out as a single open pierce, leaving the witch and cat riding the broom as raised orange pumpkin forms within the glowing moon. Wisps of hair or cloak stream behind the figure, and a black cat perches at the broom's tip. Because the witch's streaming hair separates into narrow strips, cut those final wisps with a fine detail blade and work from the broom tip toward the figure to avoid breaking them.
Moonlit Drift Pumpkin Stencil
A thick crescent moon anchors the left side of the pumpkin while four five-pointed stars drift across the remaining space. All five elements are clean cut-through openings, so the pumpkin becomes a night-sky lantern with the untouched rind acting as the dark sky between them. It is an easy carve overall; the only care point is the star tips, so cut each star point-to-center in single strokes rather than trying to steer around the whole outline at once.
Moonlit Flight Pumpkin Stencil
A witch on a broomstick flies across a full moon in this expert pumpkin stencil, her pointed hat, flowing robes, and broom bristles silhouetted against a circular background of ragged cloud cutouts. The witch figure is solid orange skin set against the large glowing moon disc, and the cloud tears around the moon's edge are pierced through. Carve the small jagged cloud tears around the moon perimeter first, then carefully outline the witch silhouette, leaving her as an uncut island of skin inside the open moon.
Moonlit Graveyard Pumpkin Stencil
A bare, gnarled tree with reaching branches, a perched owl, two flying bats, and a cluster of cemetery cross tombstones fill a large crescent-moon frame in this expert graveyard pumpkin stencil. Nearly every element is a carved pierce-through, leaving thin orange bridges for the tree branches and tombstone edges. The lit pumpkin produces a richly detailed haunted graveyard scene. Start with the smallest elements inside the scene, such as the owl silhouette and the cross details on each tombstone, before the large moon arc is removed and the frame loses rigidity.
Moonlit Hag Pumpkin Stencil
A wicked witch in profile fills a glowing full-moon circle, her pointed hat, hooked nose, jutting chin, and two gnarled clawed hands all left in silhouette against the light. The moon disc is cut through around her, so every detail depends on the pumpkin you leave behind. This expert design demands patience: remove the background in small wedges and never lever your blade against the thin fingers, which are the most fragile part.
Moonlit Halo Pumpkin Stencil
A bold crescent moon sits at the center of a decorative halo made of alternating circle and diamond openings. Everything is cut fully through, and the ring of small shapes scatters points of light around the big central glow for a celestial, almost boho look. Carve the crescent first, then work around the halo one shape at a time, spacing your cuts so the rind bridges between openings stay sturdy.
Moonlit Mouser Pumpkin Stencil
An upright cat sits in silhouette beneath a small crescent moon, just two cut-through openings on the whole pumpkin. The cat's ears, curved back, and tail all come out as a single piece, leaving the shell dark around two clean glowing shapes. Trace the cat's outline slowly in one continuous cut and push the piece out from inside the pumpkin for the cleanest edge.
Moonlit Pines Pumpkin Stencil
A dreamy night landscape wraps the pumpkin: a large crescent moon and a sky full of four-point stars shine above rolling wooded hills dotted with pine trees. The whole scene is skin-shave shading with no pierced holes, so moon, stars, ridgelines, and trees glow at different intensities depending on how deep you scrape. As an expert design, map your depths first: carve the moon deepest for the brightest glow, the hills shallowest for a soft dusk.
Moonlit Tent & Campfire
A cozy campsite scene: a peaked tent with an open door flap, a crackling campfire on crossed logs, two pine trees, and a full moon overhead. It is all continuous-wall shading, so you shave each shape down to glowing flesh while the orange skin between them stays untouched. Etch the largest areas like the tent walls first, then refine the flame tips and pine branches with a small gouge for clean edges.
Moonlit Witch Pumpkin Stencil
A silhouette witch pumpkin stencil showing a tall, elegant witch figure standing inside a large oval moon shape, holding her broomstick upright at her side with its bristle end resting on the ground and a small curled wisp near her feet. The witch silhouette stays solid orange while the surrounding oval moon area is carved away, creating a glowing halo effect that frames the dark figure. Carve the large oval background sections on either side of the witch's body in two passes, leaving the thin bridges at her hat brim and broomstick handle intact to keep the figure anchored.
Moonrise Peaks Pumpkin Stencil
A minimalist night landscape made of three simple triangle peaks in a row with a full round moon floating above them. Each triangle and the circle are cut cleanly through, turning the pumpkin into a tiny glowing mountain scene. This is one of the easiest patterns to carve; keep the triangle points sharp by cutting into each corner from both directions instead of turning the blade.
Morning Light Cross Pumpkin Stencil
A plain cross stands at the center while nine tapered rays of light fan outward around it, like a sunburst breaking through. This shaded design is carved on a continuous wall, shaving the skin away so the cross and rays glow warmly with no pierced openings, which suits a reverent, softer look. Shave the cross to an even depth first, then taper each ray shallower toward its tip so the light appears to fade outward.
Mosslight Toad Pumpkin Stencil
Print the Mosslight Toad pumpkin stencil with a numbered cutting pattern and step-by-step guide. Intermediate design; print at actual size.
Motorcycle Pumpkin Stencil
A side-profile motorcycle fills this hard pumpkin stencil with mechanical detail: the front fork and handlebars, a sculpted fuel tank, streamlined seat fairing, and two large concentric-ring wheels. The design uses a mix of solid pumpkin bridges and open cut areas so the bike reads as a crisp silhouette when the jack-o-lantern is lit. The thin fork tubes and the thin strip separating the seat from the rear fairing are the most fragile elements. Carve the two large wheel ring sections first to establish the bottom of the composition before working inward through the frame details.