All pumpkin stencils, A to Z
All 1,193 free printable pumpkin stencils in one list. Each pattern is a PDF template you can print at home, tape to your pumpkin, and trace for a Halloween jack-o'-lantern. Looking for a theme or skill level? Start at the pumpkin stencils hub.
1193 results · A to Z · Page 17 of 34
Lovestruck Grin Pumpkin Stencil
Inspired by the heart-eyes emoji, this lovable face pairs two big heart-shaped eyes with a broad crescent smile. All three openings are cut fully through, so the hearts beam bright pink-orange light after dark. The gentle notch at the top of each heart is the only fiddly spot in this easy carve; poke a starter hole in the middle of each heart and saw up into the notch from inside so the point stays sharp.
Lovestruck Heart Eyes Pumpkin Stencil
This lovestruck face beams with two big heart-shaped eyes under curved brows, a wide open smile showing three square teeth, and playful dot dimples on each cheek. All the features are cut through the wall, so the hearts glow brightest and instantly read as the classic heart-eyes expression. Cut the notch at the top of each heart carefully with short strokes, since that little dip is what makes the shape.
Loyal Lab Pumpkin Stencil
A lovable Labrador face with two glowing floppy ears, round eyes, a rounded triangle nose, and an open smiling muzzle beneath. The big ear panels and the mouth cut fully through, while narrow skin bridges separate the nose from the jowl lines. A medium carve thanks to those bridges; cut the small eye and nose openings before the large ears so the face area keeps its strength while you work.
Lucky Catch Pumpkin Stencil
Two plump fish swim toward each other with a rising trail of six bubbles between them and two wavy water slots rippling underneath. The fish bodies, bubbles, and wave lines are all cut through, turning the pumpkin into a glowing underwater scene. A relaxed medium carve for anglers and lake families; drill the bubbles in ascending size order, then saw the fish, and finish with the long shallow wave curves.
Lucky Paw Print Pumpkin Stencil
A large dog paw print with one big main pad and four oval toe pads arranged above it fills this easy dog pumpkin stencil, all five shapes carved as separate open pieces that glow independently when lit. The pumpkin-skin gaps between the toe pads and the main pad are narrow but uniform, creating a clean, recognizable print. Cut the four toe pads first from top to bottom, then remove the large main pad last, since it is the biggest single cut and easier to control once the smaller surrounding shapes are already out.
Lucky Rainbow Pumpkin Stencil
Three nested arches stack like a glowing rainbow, each band cut fully through so the pumpkin lights up in bright concentric ribbons. The strips of pumpkin left between the arches form the rainbow's dark bands and keep the wall sturdy. It is an easy design with big visual payoff; cut the smallest inner arch first and work outward, and keep the leftover ribs at least half an inch wide so they stay strong.
Lullaby Moon Pumpkin Stencil
Three plump five-pointed stars scatter across the upper face of the pumpkin while a small crescent moon tucks into the lower corner, capturing a dreamy bedtime sky. Every shape cuts cleanly through the wall, and the generous star sizes keep the sawing forgiving. Cut the crescent's inner curve before its outer curve so the thin horn tips at each end release without cracking.
MAGA Pumpkin Stencil
The acronym "MAGA" is set in wide, bold stencil letters on the upper portion, with a row of five evenly spaced five-pointed stars running beneath it. All letters and stars are fully pierced through, so the finished jack-o-lantern glows the text and stars against the night. The star points are the sharpest cuts in this design; carve each star from its center outward to each tip rather than tracing the outer perimeter, which helps keep the thin points from tearing.
Magnolia Bloom Pumpkin Stencil
A five-petal magnolia bloom with a dotted center opens across the pumpkin, framed by curling vine scrolls and shaded leaves. Everything is skin-shave work at layered depths: the petals glow brightest, the leaves and curls sit dimmer, and no part of the wall is pierced. Shave each petal from the center outward with a loop tool to build that soft gradient from bright to dark.
Maine Pumpkin Stencil
Maine's distinctive outline dominates this pumpkin stencil: a roughly triangular mainland mass with a jagged lower-right coastline and a small angular peninsula on the right side. The entire state silhouette is pierced through as a single open cutout, letting candle glow trace every notch of the rocky shoreline. Maine's coastal edge has several tight concave corners, so work those inward points with a narrow craft blade and cut the large flat interior sections last to keep the pumpkin wall stable.
Maine State Shape
Maine's craggy outline fills the pumpkin as a single glowing cutout, from the pointed northern crown down to its famously jagged coastline. The entire state interior is removed while the rind around it stays solid, so the border reads crisply once lit. The ragged coastal edge is what makes this a medium carve: trace it slowly with a fine saw and do not worry about tiny inlets, since the overall shape sells the design from a few feet away.
Make America Great Again Pumpkin Stencil
Four lines of bold stencil-style block text spell out MAKE AMERICA GREAT AGAIN across this jack-o-lantern stencil, with a five-pointed star flanking the top line and another pair of stars at the bottom. Every letter and star is carved as a separate pierced shape, so the orange pumpkin wall forms bridges inside closed letterforms like A, G, and R. Before cutting, secure those interior letter islands with a small pin through the pumpkin flesh so they don't drop out mid-carve and leave shapeless holes.
Man in the Moon Pumpkin Stencil
A serene man-in-the-moon profile fills a broad crescent, his closed-eye face, nose, and lips sculpted in layered relief within the shaved moon shape, while a single five-pointed star glows beside him. The moon is carved as continuous-wall shading at multiple depths and only the star area is thinned to shine brightest. This expert piece is all about depth control; rough in the crescent first, then sculpt the facial features gradually, checking the glow with a light as you go.
Mandala Smiler Pumpkin Stencil
A mischievous crescent-eyed grin packed with individual teeth sits inside a full ring of diamond and leaf-shaped cutouts, with dozens of small dots sparkling between them. Every element is pierced through, and the sheer number of tiny openings is what earns the expert rating. Drill all the dots first, then saw the border shapes, saving the big fragile mouth for the very end.
Maple Drift Pumpkin Stencil
Three maple leaves drift diagonally down the pumpkin, each one cut fully through with its stem, and small round holes scattered between them like floating seeds. The pierced leaves throw crisp, recognizable maple silhouettes of light, making this a lovely all-autumn design rather than a strictly Halloween one. Saw each leaf point from the tip inward and remove the waste in sections so the notched edges stay sharp.
Maple Leaf Pumpkin Stencil
A single large maple leaf fills most of the stencil, tilted slightly to the right with its stem curving down and left. The leaf has seven pointed lobes with gently serrated edges and a central vein ridge left solid, creating a two-section open cut on each side of the midrib. Lit from inside, the two halves of the leaf glow symmetrically while the narrow central vein remains as an unlit orange line. Keeping that vein bridge intact is the key structural challenge: cut the left lobe section completely before moving to the right so you're never cutting beside an already-open neighbor.
Martini Glass with Olive
A tall martini glass with a skewered olive resting on the rim, drawn in clean bar-sign style from the wide conical bowl down the slender stem to the round base. It carves as skin-shave shading, so the glass appears as smooth pale relief against the dark rind with no pierced openings. A medium project overall; keep your peeling depth even across the big bowl, and leave the thin stem for careful last strokes.
Maryland Pumpkin Stencil
Maryland's instantly recognizable outline appears as a single cut-through silhouette on this pumpkin stencil, showing the state's wide rectangular body, the deeply indented Chesapeake Bay notch along the right side, the narrow Eastern Shore peninsula, and the small western panhandle extending to the left. Because the Bay notch splits the right edge into two separate lobes, the wall between them is slender. Cut the inner Bay-notch corners first using a pointed blade so that delicate section doesn't flex and tear while you remove the larger open areas.
Maryland State Shape
Maryland glows inside a carved rectangular window, its straight northern border on top and the deeply notched Chesapeake Bay splitting the eastern shore from the mainland. The bay itself is left as standing pumpkin wall, so the two glowing landmasses frame it dramatically. That narrow bay peninsula is what makes this a hard carve; cut away from it on both sides, keep the strip at least a finger wide, and brace it from inside if needed.
Massachusetts Pumpkin Stencil
Massachusetts appears as a wide, roughly rectangular landmass in this pumpkin stencil, tapering toward a notched right edge that represents Cape Cod's elbow and the smaller hook of the outer cape on the lower right. The entire state outline is carved as one open silhouette, so the jagged southeastern coastline and the separated cape hook both need steady hands. Cut the narrow cape-tip shape separately before removing the large mainland body, keeping that small piece in place with a pin until both cuts are complete.
Massachusetts State Shape
The Massachusetts silhouette stretches across the pumpkin, complete with the unmistakable curled hook of Cape Cod flexing off the eastern end. The entire state is cut through as one opening so the whole commonwealth glows. That skinny Cape Cod arm is the trickiest part of this medium carve; leave it for last, support the wall with your free hand, and use gentle strokes so the curl does not tear loose.
Match Point Pumpkin Stencil
A tilted tennis racket with an open oval head leans across the pumpkin while a round ball floats just below the frame. The racket head, handle, and ball are all cut through as chunky, simple shapes with no interior string detail to fuss over. That makes this an easy pattern for team celebrations; carve the long handle in one steady pass so its edges stay parallel.
Mean Skull Pumpkin Stencil
Two large angled triangular eyes slash across the upper face of this jack-o-lantern stencil, pointing sharply inward to give the skull an aggressive, furrowed scowl. Below, two narrow rectangular fang-tips drop from the center, and a wide jagged mouth with three upward-pointing teeth stretches across the bottom. All six shapes are cut through individually, leaving solid orange between them to hold the face together. The small central fang-tips are easy to snap, so cut each one from the outer corner inward and avoid side pressure on the blade.
Medusa Pumpkin Stencil
Medusa's face stares out from this expert pumpkin stencil, her features rendered as thin-cut channels forming almond-shaped eyes, a small nose, and full lips against a solid oval face. The hair is replaced by dozens of writhing snake bodies, each carved as an interlocking mass of curved shapes with heads visible at the perimeter, open mouths and coiling bodies creating a dense web of negative space around the face. When lit, the snake-hair region glows with a complex, shifting pattern while the face remains a composed solid island. Work the snake-hair sections in quadrants, finishing each area before moving to the next, so no large unsupported skin islands shift mid-carve.
Memorial Awareness Ribbon Pumpkin Stencil
An awareness ribbon in the classic looped shape centers this pumpkin stencil, its two long tails crossing at the bottom to form a diamond point. The ribbon outline is pierced through so candlelight floods the shape against the solid orange wall, making it read as a bold ribbon of light. The narrow crossed tails at the bottom form a delicate bridge, so cut the large upper loop sections first and save the crossing point for last when the rest of the wall is fully open and the structure is lightened.
Menacing Glowing Eyes
Just two fierce, slanted eyes with curled inner corners, glaring out of an otherwise untouched pumpkin. Both eye shapes are cut fully through, and because there is no nose or mouth, the minimalist glare does all the spooky work after dark. This is a true beginner project: trace carefully, cut each eye in two passes following the hooked curve, and the whole carve is done in under twenty minutes.
Merlot Mortimer Pumpkin Stencil
A comical full-body skeleton stands upright in this pumpkin stencil, one hand raised with wispy steam rising from it and the other arm holding a wine glass, its cartoonishly large round skull grinning with exaggerated round eyes and a tiny circular nose. The torso shows a rib cage of horizontal bars, and the pelvis, legs, and clawed feet extend below in a loose stick-figure arrangement. Carve the wine-glass outline and the tiny nose circle first, as both are small isolated shapes that benefit from the surrounding wall being intact before you open the larger rib cage and body cavities.
Meteor Mender Pumpkin Stencil
A space repair hero wears a magnetic rescue glove. Print this original shaded pumpkin stencil with a two-depth key and detailed carving guide.
Michigan Mitten Shape
Michigan's Lower Peninsula carved as one big glowing mitten, complete with the thumb of Saginaw Bay and the ragged shoreline notches along the lakes. The full state shape is cut through, so accuracy along that coastline is the whole challenge, which is what pushes this one to hard. Trace the outline with a fine saw, work the tight bay curves in several passes, and remove the waste piece in halves to protect the thumb.
Michigan Pumpkin Stencil
Michigan's Lower Peninsula occupies most of this pumpkin stencil, its mitten-like silhouette instantly recognizable with the distinctive thumb peninsula on the upper right. A small notch at the top indicates where the Upper Peninsula begins, adding geographic accuracy to the outline. The entire shape is carved as a single open cutout, letting candle glow illuminate the full state contour. The thumb peninsula's base is a narrow waist of pumpkin wall, so cut the outer edge of the thumb with a slow controlled stroke before removing the larger lower-peninsula body.
Midnight Fang Pumpkin Stencil
A grinning cat face made for a black-painted pumpkin: big almond eyes with pointed ear tips, a triangle nose, four whisker slits, and a wide smile showing two tiny fangs. Every feature cuts through so the orange interior glows against the dark shell. Paint the pumpkin first and let it dry fully before transferring the pattern; carve the whisker slits last with gentle strokes so the paint edge does not chip.
Midnight Flutter Pumpkin Stencil
A small bat with scalloped wings glides across a big crescent moon in a classic Halloween night scene. Both shapes are shaved rather than pierced: the moon is peeled into a bright smooth crescent, the bat's wings are etched at a lighter depth, and its body stays as raised rind. A hard shading pattern that rewards patience; keep the moon's inner curve clean since that long sweep frames the entire design.
Midnight Howler Pumpkin Stencil
An expert-level werewolf pumpkin stencil depicting a muscular beast mid-stride, head thrown back in a snarl, clawed hands reaching forward, and fur rendered in dozens of jagged radiating cuts around the shoulders, arms, and legs. The face detail is dense: open jaws with visible fangs, heavy brow, and scattered facial fur cuts create a fiercely layered silhouette. Because many fur elements are isolated islands, tape a backing sheet over the stencil after transfer so small pieces cannot drop inside the pumpkin until you are ready.
Midnight Menace Pumpkin Stencil
A classic evil jack-o'-lantern with steeply slanted triangle eyes glaring downward and a wide jagged mouth of uneven fangs, some long and some short for extra menace. All shapes are pierced through for a fiery glow. Rated medium because of the zigzag mouth; cut each fang point with two clean strokes meeting at the tip, and bevel the eye edges outward so more light escapes upward.
Midnight Rose Pumpkin Stencil
A layered rose framed by bat wings and pointed leaves for a gothic Halloween pumpkin. Includes a printable stencil and numbered carving guide.
Midnight Whiskers Pumpkin Stencil
A seated cat in profile, ears pricked and long tail curling upward, cut entirely through so the whole silhouette becomes a window of warm light. The design has no interior details, which keeps it simple, but the slender curved tail asks for a little care. An easy carve overall; save the tail for last and support the wall with your free hand as you follow its curve so the tip stays intact.