All pumpkin stencils, A to Z
All 1,193 free printable pumpkin stencils in one list. Each pattern is a PDF template you can print at home, tape to your pumpkin, and trace for a Halloween jack-o'-lantern. Looking for a theme or skill level? Start at the pumpkin stencils hub.
1193 results · A to Z · Page 22 of 34
Raptor Silhouette Pumpkin Stencil
A velociraptor strides in profile on this dinosaur pumpkin stencil, its long horizontal tail balancing a compact body, one forelimb raised, and its small head turned slightly with a visible eye circle. The entire figure is a single large silhouette cut away from the pumpkin wall, with a few small internal cuts defining the eye and forelimb. Because the tail is long and slender, cut it from the body outward toward the tip in one smooth pass before removing the larger torso section so the thin tail stays supported.
Rat and Moon Pumpkin Stencil
A large aggressive rat crouches in front of a semicircular moon arch in this pumpkin stencil, its shaggy fur rendered in dozens of fine radiating cut lines while the long serrated tail curves up behind it. Small star-burst marks scatter near the snout. The moon background is the main large negative-space cut-out, while the rat body itself is an intricate network of fur-line slots with solid orange between them. Cut the moon arch first as a single clean sweep, then work the fur lines from the rat's back inward toward the belly.
Rat Pumpkin Stencil
A rat stands upright on its hind legs in profile, nose tilted upward and thin whiskers radiating from its snout, with a long curved tail sweeping forward along the base. The entire silhouette is cut away as a single open shape, so candlelight throws a clean, solid rat shadow on surrounding surfaces. Because the tail curls close to the body at one point, make sure to cut that gap all the way through without nicking the connecting pumpkin flesh above it.
Raven's Regard Pumpkin Stencil
Print the Raven's Regard pumpkin stencil with a numbered cutting pattern and step-by-step guide. Intermediate design; print at actual size.
Rearing Horse Pumpkin Stencil
A powerful horse rears up on its hind legs in this detailed pumpkin stencil, its flowing mane and arched neck rendered in sweeping cut-through lines while the body remains largely solid orange. Thin bridges of pumpkin between the leg cuts and the belly keep the composition intact, so light escapes in dramatic slashes rather than one big opening. Cut the fine mane strands at the top first before tackling the larger body sections, to avoid flexing those delicate cuts while the rest of the work is underway.
Rearing Rat Pumpkin Stencil
A rat rearing up on its hind legs fills this Halloween pumpkin stencil, its long curved tail sweeping to one side and multiple whiskers fanning from both sides of the snout. The body is largely solid orange pumpkin skin framed by a pierced silhouette, so candlelight outlines the creature's claws and ragged chest fur in warm amber. Cut the whisker lines early while the stencil is anchored: there are three to four per side, so work from the snout outward on each side before opening the larger body area.
Reef Prowler Pumpkin Stencil
A left-facing hammerhead shark in full profile, wide head, tall dorsal fin, and swept tail, finished with three short gill slashes behind the head. The whole body is a shaded shape: you peel the skin inside the outline down to pale flesh and leave the pumpkin wall intact. Shave with the grain in long horizontal strokes to keep the body smooth, then deepen the gill lines and eye dot last for contrast.
Reef Resonance Pumpkin Stencil
An ocean guardian wears sweeping shell-inspired gauntlets. Print a two-depth shaded pumpkin stencil with a depth key and individual scraping instructions.
Retro Flying Saucer Pumpkin Stencil
A classic flying saucer seen from a three-quarter angle fills this hard space pumpkin stencil. The domed cockpit on top, the wide flat disc with a raised rim, three small round indicator lights on the underside, and three diverging tractor-beam rays below all read clearly as carved shapes. The beam rays are solid pumpkin strips between large open triangular cutouts, so lit from inside the beam glows as three bright triangular shafts pointing downward. Carve the three beam triangles first since they are the largest open areas, then work upward through the disc details and finish with the small circular indicator lights.
Reverse BOO Block Letters
The word BOO in fat block letters fills the front of the pumpkin, carved in reverse relief: the background panel is shaved away while the letters remain raised in untouched skin. No holes are pierced, so the pumpkin stays sturdy and reads clearly by daylight or candlelight. An easy etch for a first shading project; trace the letter outlines with shallow score cuts before peeling the background to an even depth.
Rhode Island Pumpkin Stencil
The outline of Rhode Island as it appears on a map is the sole design on this state pumpkin stencil: a narrow vertical silhouette with a straight eastern coast, an irregular western edge, and a distinctive notch in the lower right where Narragansett Bay indents the shoreline. The entire shape is one single pierce-through cutout so the state glows as a solid window of light. Trace the coastline outline slowly and continuously without lifting the blade so the curved bay notch at lower right stays smooth and does not crack at that concave point.
Rhode Island Stylized Shape
A tall, flowing take on Rhode Island glows as one large cut-through opening, with a sweeping curved western edge and a notched coastal bite carved into the bay side. The stylized silhouette keeps the state recognizable while smoothing the fussiest shoreline detail into bold shapes. Carve the big outer curve in long confident strokes, then slow down for the inward bay notch so its point stays sharp.
Ribbon of Hope Pumpkin Stencil
A large awareness ribbon loops down the center of the pumpkin, framed by flowering vines, leaves, and two small hearts tucked into the upper corners. The whole tribute is shave-carved in layered relief: the ribbon glows brightest, the florals sit slightly dimmer, and the background skin stays dark, with no pierced cuts. Establish three distinct depths early, ribbon deepest, then flowers, then leaf accents, and keep each layer consistent as you work outward.
Ring of Hearts Pumpkin Stencil
Eight hearts arranged in a ring, each one pointing outward like petals on a wreath, with eight small round dots glowing in the gaps between them; the center of the pumpkin stays solid. Every heart and dot is cut through, turning the whole design into a radiant circular pattern. A medium carve that rewards accuracy: trace the stencil carefully so the ring stays even, and drill the dots before sawing the hearts around them.
RIP Graveyard Pumpkin Stencil
A moonlit graveyard scene arches across this pumpkin stencil, with a large cracked tombstone bearing the letters RIP at center, flanked by two cross-topped stones and tufts of grave grass below, all framed inside a curved arch at the top. The composition is pierced so the entire scene cuts away from the pumpkin wall and glows as one large backlit picture. Cut the letter shapes inside RIP first with a detail blade, then work outward through the tombstone cracks, cross details, and grass tufts before removing the large arch framing area last.
RIP Tombstone Pumpkin Stencil
A classic Halloween tombstone with a pointed arch and pedestal base fills this pumpkin stencil, its face engraved with a melting ghost figure and the letters R.I.P. The ghost's hollow round eyes and the R.I.P. text are pierced-through openings against the solid tombstone body, which itself is surrounded by a large cut-out arch that glows around the stone's perimeter when lit. Cut the small letter periods and the ghost's eye dots before opening the large arch surround, so the isolated letter islands stay stable while the surrounding wall is still full.
Rising Ghoul Pumpkin Stencil
A skeletal ghoul mid-stride in this expert pumpkin stencil reaches one clawed hand upward, its skull-face snarling with hollow triangular eyes, while ragged clothing and a mass of dirt and bone at the base suggest it is rising from the grave. The figure is a loose silhouette of interconnected pieces separated by thin white-line channels, so the lit jack-o-lantern shows a glowing zombie body with dark gaps that define the bones and tattered fabric. Preserve the thin ankle and wrist bridges until last, cutting the torso and skull interior openings first to keep those fragile joints from being stressed by surrounding cuts.
Rising Zombies Pumpkin Stencil
Two zombie figures rising from the ground face inward in this hard pumpkin stencil, their ragged arms reaching upward and their tattered lower bodies emerging from earth at the base of a tall oval negative space. The zombies read as solid orange silhouettes flanking a large central open oval, so the lit jack-o-lantern glows through that oval while the outstretched zombie arms and rotting fingers stand out in relief. Carve the finger details at the top of each arm before cutting the large central oval, as the fingers are the most fragile elements and benefit from the extra pumpkin mass still in place.
River Sail Spinosaurus Pumpkin Stencil
A Spinosaurus with a dramatic sail and sweeping tail. Print a two-depth shaded dinosaur stencil with detailed scraping instructions.
Rock Singer Pumpkin Stencil
A vintage rock-and-roll singer with a greased pompadour and an open-mouthed grin holds a microphone to his lips on this Halloween pumpkin stencil, his body squared up in a wide stance with legs apart and a guitar strap across the chest. The figure is built from large and medium pierced sections with solid orange bridges defining the face, hair curl, and clothing folds. When lit, the silhouette reads as a golden retro performer mid-song. Cut the face details, including the open mouth and eye lines, before removing the large chest and torso sections that support the surrounding wall.
Rocket and Stars Pumpkin Stencil
A retro rocket ship blasting diagonally upward through a field of five-pointed stars fills this easy pumpkin stencil. The rocket body is a large solid pierce-through with a small circular porthole cut from its center, and two swept fins angle beneath it; six stars of varying sizes are scattered across the field. Lit from within, the rocket and stars all glow as bright cut-out shapes. Cut the small circular porthole in the rocket body before removing the rocket silhouette itself, since that circle is far easier to score cleanly while the surrounding wall has full support.
Rocket Ship Pumpkin Stencil
A retro rocket ship blasts off inside a circular porthole frame in this space pumpkin stencil. The rocket has a pointed nose cone, a round porthole window on its body, swept-back tail fins, and a fan of exhaust flames spreading beneath it, all set within a large open circular border. The rocket body and circle frame remain as solid pumpkin skin while the background inside the circle, the fin gaps, and the flame tongues are cut through. Cut the narrow gaps between the individual flame tongues first so the lower rocket structure stays intact before the large circular background is removed.
ROFL Emoji Pumpkin Stencil
The rolling-on-the-floor laughing emoji face fills this pumpkin stencil as a large round circle with squeezed-shut eyes, a wide open grin, and a single tear of joy near one eye. The outer circle outline is pierced, the eye slashes are cut through, and the broad curved mouth is a large open section, so light floods through the whole composition at once. Because the outer ring has almost no solid wall around it, cut the eye slashes and teardrop first to establish interior reference points, then follow the outer circle last to avoid distorting the round shape prematurely.
Rooftop Web Pumpkin Stencil
A natural spider web spans broken rooftop corners. Create a shaded pumpkin with continuous web strands, a two-depth key and individual scraping steps.
Rose Bloom Pumpkin Stencil
A fully open rose bloom fills this pumpkin stencil, rendered as a set of curved, teardrop-shaped petals radiating from a tight spiral center. The cut-out segments are separated by thin pumpkin-flesh bridges that hold the design together, so when lit the candle glow traces the swirling petal arrangement. Carve the smallest center pieces first to avoid cracking the surrounding petals, and keep a damp cloth nearby to prevent the thin bridges from drying out mid-session.
Rose Pumpkin Stencil
A full rose with a spiraling center bud, layered outer petals, and a thin stem with two small leaves is the subject of this flower pumpkin stencil. The petals are rendered as irregular organic cut sections that radiate from the tight center spiral outward to ragged outer edges, while the stem and leaves below are smaller separate pieces. Lit from inside, the solid pumpkin between cuts reads as petal ridges framing windows of light. Cut the innermost spiral bud sections first so the outer petals remain attached and sturdy while you navigate the tightest curves.
Rottweiler Pumpkin Stencil
A close-up Rottweiler face looks straight ahead on this dog pumpkin stencil, with expressive round eyes, a broad nose with a spiral nostril, and a relaxed mouth with a hint of jowl. Dozens of irregular cut sections across the forehead, cheeks, and ears create the breed's tan-and-black coat markings, all bridged by thin solid pumpkin-wall lines. When lit, the face glows with warmth through every gap while the orange bridges read as fur texture. Cut all the small inner-face detail shapes first, especially the nostril spiral, before tackling any of the large outer sections that would otherwise loosen the wall.
Round Raccoon Energy Pumpkin Stencil
A round raccoon with tiny paws, sleepy eyes and a striped tail. Download the printable pumpkin stencil with its cutout key and detailed carving guide.
Running on 1% Pumpkin Stencil
A cheerful robot keeps running with a nearly empty battery. Print this pumpkin stencil with a visual cutout key and step-by-step carving guide.
S-Curve Snake
A thick snake winds through a bold S curve, its tapered head at the top and tail flicking out at the base, all carved as a single flowing opening. The whole serpent shape is cut through, so one continuous ribbon of light snakes across the pumpkin after dark. Because it is a single aperture with no fragile bridges, this easy design just needs slow steady knife work around the curves.
Saber Battle Pumpkin Stencil
Two original energy blades clash in a burst of sparks. Print the Saber Battle pumpkin stencil with a visual cutout key and detailed carving guide.
Sad Ghost Pumpkin Stencil
Two drooping teardrop eyes, a tiny pierced heart for a nose, and a jagged zigzag mouth give this ghost jack-o-lantern pumpkin stencil its mournful expression. All five cut pieces are bold and generously sized, making them straightforward to carve cleanly. The small heart is the trickiest element; cut its two lobes with short inward strokes meeting at the bottom point so the tip stays crisp rather than tearing.
Sailboat With Pennant
A little ship glows on the pumpkin with two triangular sails split by a tall mast, a small pennant flying at the top, and a wide trapezoid hull below. Each sail, the flag, and the hull are separate cut-through openings, with skin bridges forming the mast and boom lines between them. This easy design suits young pirates and first-time carvers; cut the small pennant first while the wall is sturdy, then the sails, then the big hull last.
Salty Claws Pumpkin Stencil
A full lobster stretches sideways across the pumpkin with segmented tail, walking legs, long antennae, and two oversized claws rendered in shaved-skin relief. Nothing is pierced through: the body shapes are peeled bright while the segment lines and joints remain as dark etched divisions. This is a hard shading project because of all those segments, so map the outline first with shallow V-cuts, clear the large claw and tail areas, and save the skinny legs and antennae for careful final passes.
Saturn Pumpkin Stencil
Saturn's ringed profile rendered in a loose, sketchy style fills this expert space pumpkin stencil, with the planet body shown as a series of jagged horizontal band cuts and the elliptical ring system sweeping through as two curving arcs, all separated by thin skin bridges that suggest atmospheric cloud layers. The ring bands are the trickiest element: each arc is a narrow, isolated strip that connects to the planet body only at two small points. Cut the planet body bands first, working from the equator outward toward the poles, then carefully score the ring arcs from their inner connection points toward the outer tips.
Saturn's Glow Pumpkin Stencil
A big ringed planet dominates the middle of the design, its ring sweeping behind the glowing globe as two side wings, surrounded by four pointed stars and a few round dot holes. The planet, ring segments, and stars are all cut through for a bright cosmic display. A great medium pick for space-obsessed kids and tweens; carve the planet circle first, then add the ring wings so the thin rind gap between them stays even.