Similar to This
View all stencils →About this stencil
A fully decorated Christmas tree rises from a pile of wrapped presents, hung with round ornaments, a bell, beaded garland swags, and a star topper at its peak. The scene is shaved into the pumpkin wall at multiple depths, with the ornaments and gift boxes thinned brightest while the boughs stay as dark raised skin. Block in the tree's triangle first, then carve each bough layer top to bottom so the branches overlap naturally. This design is rated Expert / Pro and takes most carvers around 240 minutes from trace to glow. Sculpting-grade work. Three or more depth layers, fine detail.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- 1Print it
Download the PDF and print at 100% scale on letter or A4 paper.
- 2Prep the pumpkin
Cut the lid at an angle, scoop the guts, thin the wall to ~1 inch.
- 3Tape it on
Snip darts in the paper so it lies flat against the curve.
- 4Transfer the design
Poke along every line — about one dot every 1/8 inch.
- 5Carve it
Connect the dots with short straight cuts. Center first, work outward.
- 6Light it up
Drop in a battery LED pumpkin light and you're done.
Tools you'll need
For a expert / pro carve like this you'll want a full ribbon tool set, clay sculpting loops, x-acto knife, and dremel (optional). Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
Beginner-friendlyThree-Tier Pine Tree
A stately three-tier pine tree with swooping boughs and a short trunk base, cut fully through so the whole evergreen glows like a lantern. The layered branches create six pointed tips where each tier sweeps upward. Cut from the trunk upward one tier at a time, and slow down at every branch point so the tips stay sharp instead of rounding off.
Beginner-friendlyChristmas Tree Pumpkin Stencil
A stylized Christmas tree built from sweeping, wave-like branch layers fills this seasonal pumpkin stencil, its ribboning boughs stacked vertically and topped by an eight-pointed star cut-out. The flowing branch shapes are pierced through, glowing warmly when lit, while the narrow gaps between layers stay solid and define the tree's form. Carve the star tip-by-tip before cutting the large branch sweeps, so the fragile star points have the full pumpkin wall behind them for support.
IntermediateSix-Leaf Tree
A slender trunk rises from a curved ground line and branches into six almond shaped leaves, three on each side, each one a separate glowing opening. The trunk, leaves, and base arc are all cut through while the space between them stays solid, so the tree reads clearly from across the yard. Carve the leaves from the center outward and leave the narrow branch junctions for last on this medium design.
Beginner-friendlyTall Star and Three Dots
One big five-pointed star dominates the pumpkin with three small round dots arcing beneath it, like a shooting star leaving a trail. Both the star and the dots are straightforward cut-through openings, making this a perfect first stencil for young helpers with an adult on the knife. Drill or poke the three dots first as warmups, then saw the star point to point, backing out at each corner.
AdvancedCloudy Moon Campsite
A cozy campsite spreads across the pumpkin: a striped A-frame tent between pine trees, a crackling campfire, and a full moon drifting behind wispy clouds. The scene is shaved into the skin rather than pierced, so light glows softly through the thinned areas at different strengths. For this hard shading job, carve the brightest spots like the fire and moon deepest, and keep the trees and clouds shallower to build a layered nighttime look.
IntermediateMoonlit Tent & Campfire
A cozy campsite scene: a peaked tent with an open door flap, a crackling campfire on crossed logs, two pine trees, and a full moon overhead. It is all continuous-wall shading, so you shave each shape down to glowing flesh while the orange skin between them stays untouched. Etch the largest areas like the tent walls first, then refine the flame tips and pine branches with a small gouge for clean edges.