Pumpkin carving templates
1159 free printable stencils. Download, print, trace, carve.
20 results · Page 1 of 1
Broad Five-Point Star
One broad five-point star fills the front of the pumpkin as a single dramatic cutout. The entire star is pierced through, leaving a clean rim of pumpkin around it, so a candle inside turns the whole shape into a lantern window. As an easy design it is ideal for beginners; draw a guide dot at each of the five points before cutting, then connect them with straight strokes so the star stays symmetrical.
Die and Pawn on Curved Board
A six-sided die and a classic rounded game pawn sit side by side on a curved, segmented game board path. The die faces, pawn silhouette, and board track are shave-carved so they glow in warm relief, with the pips scooped deeper for contrast; nothing pierces the wall. Shade the two big shapes first, then dot in the pips with a small round gouge, keeping each one the same depth so the die reads evenly.
Eight-Point Star and Diamonds
A large eight point star anchors the center while small diamonds and dots scatter around it like a burst of night sky sparkle. Every shape is a clean cut-through opening, so the pumpkin throws star shaped light across nearby walls and steps. Cut the big star's inner corners with a fine blade and pop the little diamonds out gently to keep their sharp points intact on this medium pattern.
Etched Tree with Three Gifts
A fully decorated Christmas tree rises from a cluster of wrapped presents, complete with beaded garland swags, patterned ornaments, and a star on top. The entire scene is skin-shave shading with no pierced openings; the tree and gifts are peeled pale while the garland beads and ornament patterns stay dark and raised. Shave the broad tree tiers first, then switch to a fine tool for the garland dots and bows.
Frothy Four-Panel Beer Mug
A frothy beer mug fills the pumpkin, its billowing head of foam spilling over a four-panel glass body and a sturdy curved handle. This is a shaded design carved into a continuous wall, so the mug is shaved out of the skin rather than pierced, which keeps the foam bubbles and panel lines intact. Shave the foam shallow and fluffy, then go slightly deeper on the four panels so the glass glows brighter than the head.
Happy Birthday Pumpkin Stencil
Bold block-letter text reading HAPPY BIRTHDAY fills this pumpkin stencil in two stacked rows of chunky stencil font, with each letter interior cut away and the letter strokes left as solid pumpkin skin. The design spans nearly the full face of the jack-o-lantern, making it a wide, flat carve with very little negative space. Because the closed counters inside letters like B, D, and P are floating islands of skin, carve the letter surrounds first, then carefully cut the inner counter openings to avoid dislodging them prematurely.
It's a Boy Pumpkin Stencil
The phrase "it's a boy" is set in a bold, bubbly hand-lettered script across two lines, with a heart shape centered below the text. Every letter is cut as a solid shape: the rounded strokes of the lowercase letters, including the counter inside the "o" of "boy" and the enclosed loop of the "b," are all part of the carved-away design. Lit from within, the chunky letterforms glow against the pumpkin wall. Cut the enclosed counters of "b" and "o" before removing the main letter bodies so those small interior pieces don't become loose mid-carve.
Kansas Heart Lettering
A glowing I, a full heart, and the letters K and S stacked beneath, spelling out love for Kansas in chunky serif type. All four elements are simple cut-throughs, which keeps this one easy despite looking polished. Transfer the pattern carefully so the letters stay level, cut each letter's inside corners with the tip of the saw, and open the big heart last since it is the largest and most forgiving shape.
Margarita and Citrus Wheel
A wide-rimmed margarita glass on a slender stem, garnished with a citrus wheel notched onto the rim, its segments radiating like a tiny sun. This is a shading design: the glass, stem, and fruit are shaved to different depths so the salt-rimmed bowl reads brighter than the stem. Etch the citrus wheel's thin segment lines with a V-tool after the broad shapes are done so they stay crisp.
Martini Glass with Olive
A tall martini glass with a skewered olive resting on the rim, drawn in clean bar-sign style from the wide conical bowl down the slender stem to the round base. It carves as skin-shave shading, so the glass appears as smooth pale relief against the dark rind with no pierced openings. A medium project overall; keep your peeling depth even across the big bowl, and leave the thin stem for careful last strokes.
Raising Hands Emoji Pumpkin Stencil
Two open hands with spread fingers are raised side by side on this emoji pumpkin stencil, each palm facing forward with small rectangular cuff shapes below the wrists. Four small triangular sparkle shapes are arranged above the hands in a row. All elements are pierced through so the lit jack-o-lantern shows a bright raising-hands celebration scene. Cut the four small triangles at the top first while the wall is thickest, then remove the cuff rectangles, and finish by cutting around the finger contours of each hand last.
Raw Fir with Glowing Ornaments
A fully decorated Christmas tree rises from a pile of wrapped presents, hung with round ornaments, a bell, beaded garland swags, and a star topper at its peak. The scene is shaved into the pumpkin wall at multiple depths, with the ornaments and gift boxes thinned brightest while the boughs stay as dark raised skin. Block in the tree's triangle first, then carve each bough layer top to bottom so the branches overlap naturally.
Six Stars and Seven Dots
Six five-pointed stars and seven round dots scatter across the pumpkin like glowing confetti, wrapping around the sides rather than clustering on one face. Every star and dot is cut fully through, turning the whole pumpkin into a lantern that throws starlight in all directions. This medium all-over pattern is extra charming on a warty or bumpy pumpkin; drill the dots first, then cut each star point to point, rotating the pumpkin so you always saw at a comfortable angle.
Star & Four Dots
One big five-pointed star sits at the center of the pumpkin, ringed by four round polka-dot holes above, below, and to each side. Every shape is cut fully through, turning the pumpkin into a cheerful lantern that throws star and dot patterns onto nearby walls. This easy design is a great first carve; drill or scoop the four circles first, then saw the star point to point so the tips stay sharp.
Tall Star and Three Dots
One big five-pointed star dominates the pumpkin with three small round dots arcing beneath it, like a shooting star leaving a trail. Both the star and the dots are straightforward cut-through openings, making this a perfect first stencil for young helpers with an adult on the knife. Drill or poke the three dots first as warmups, then saw the star point to point, backing out at each corner.
Three Rainbow Arcs and Sun
Three nested rainbow arcs curve over a low half circle sun, filling the bottom of the pumpkin with stacked bands of light. Each arc is cut through while narrow ribs of rind stay between the bands, which is what creates the layered glow. Keep those ribs at least half an inch wide as you carve this medium design, since they carry all the structure.
Three Unequal Stars and Dots
Three five point stars in different sizes drift diagonally across the pumpkin, joined by a scatter of small round dots like distant starlight. Each star and dot is cut fully through, turning the whole pumpkin into a little constellation lantern. The medium challenge is the stars' inner corners; use a thin blade, cut point to point, and finish the tiny dots with a drill or apple corer.
Tilted Tennis Racket and Ball
A tilted tennis racket with an open oval head leans across the pumpkin while a round ball floats just below the frame. The racket head, handle, and ball are all cut through as chunky, simple shapes with no interior string detail to fuss over. That makes this an easy pattern for team celebrations; carve the long handle in one steady pass so its edges stay parallel.
Two Dice & Pawn Game Path
A game-night tribute showing two tumbling dice with action lines beside a classic rounded game pawn, all sitting on a curving track of board spaces. The whole scene is skin-shave shading: you peel the rind away inside each shape while the wall stays solid, so the design shows as pale relief in daylight. For this hard piece, outline every shape with shallow score cuts first, then peel, keeping the dice pips crisp and round.
West Virginia Heart Lettering
Bold serif letters spell out I, a big solid heart, then W and V stacked below, the classic hometown-pride message carved in light. Each letter and the heart are cut fully through, glowing like marquee type against the dark pumpkin. Serif letters have thin corner strokes, so cut the serifs first with the knife tip before opening the thick strokes, and keep the wall between W and V at least a half inch wide.