Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
37 results · Page 1 of 2
Alien Pumpkin Stencil
An extraterrestrial figure with an oversized oval head, large almond-shaped eyes, delicate facial features, and a lean torso covered in fine ribbed line-work fills this expert-level pumpkin stencil. The alien holds up one three-fingered hand in a peace sign, and the entire upper head is decorated with small curved slash marks suggesting brain-like texture. Each fine interior line across the torso and head must be cut precisely to retain the many thin bridges that keep the design from collapsing. Cut the small curved head-texture marks first before any large area is removed, as they rely on a full wall for support.
Barred Eyes and Diamond Dots
A wildly ornate astonished face: two huge round eyes split by vertical bars, a tall oval mouth gaping in shock, and a halo of diamonds, dots, and curved flourishes radiating in every direction. All of it is cut through, from the barred eyes to the smallest accent dot, so the whole pumpkin erupts in patterned light. Rated hard for its piece count, work from the center outward and leave the outer diamonds and dots for the final pass.
Carnivorous Plant Pumpkin Stencil
A carnivorous plant in a small pot rears up with a wide-open dinosaur-like skull head in this hard halloween pumpkin stencil, its spotted cap, rows of sharp exposed teeth, a single round eye socket, small side leaves, and a slender stem all rendered as an intricate mix of open cuts and skin bridges. The row of individual teeth is the most demanding detail, each one a narrow spike that must stay connected at its root while the surrounding jaw is removed. Cut the eye socket and cap spots first, then work the tooth row from the back molars forward to the front fangs, leaving each tooth tip touching its neighbor until the very end.
Coronavirus Pumpkin Stencil
This hard-difficulty pumpkin stencil depicts a coronavirus particle rendered as a circular arrangement of spike proteins: round-tipped stalks radiate outward from a central ring of crescent shapes, all cut as individual floating pieces within a large open surround. When lit, the scattered spikes and interior crescents glow as a constellation of shapes against the dark pumpkin. Carve the inner crescent cutouts at the center first, then work spike by spike outward, since removing the outer spikes early can destabilize the central ring.
Diamond Stingray with Spots
A diamond-bodied stingray glides diagonally across the pumpkin, its spotted back, curled wingtips, eye ridges, and long trailing tail all shaved into the skin with no pierced openings. The spots are left raised while the surrounding body is etched down to glow. Outline the ray first, then shave patiently around each spot; those raised dots are what sell the texture.
Fetus in Womb Pumpkin Stencil
A fetus-in-womb pumpkin stencil showing a curled embryo silhouette floating inside a large circular womb shape, with a crescent arc cut above it and a curved base piece below, suggesting the rounded cavity of the uterus. The fetus itself remains solid orange with detail cut-outs defining tiny clenched fists and a rounded head, while the surrounding womb sections are pierced to glow. Cut the large curved womb sections first, then the small fetal detail cuts, leaving the fragile umbilical cord line as the very last cut.
Flask With Three Bubbles
A chunky Erlenmeyer flask with three round bubbles rising from its neck, giving off a mad-scientist potion vibe when lit. The flask body and each floating bubble are cut cleanly through, so the brew appears to glow and fizz after dark. This easy design suits first-time carvers: cut the big flask opening from the bottom up, then punch out the three circles with a small round cut or an apple corer.
Gear Cross and Three Dots
A chunky steampunk gear glowing around a solid crossbar, with three round rivet dots floating beside it like escaping sparks. The spaces between the gear teeth and the four windows inside the cog are cut through, while the cross-shaped bar stays attached to the pumpkin wall and holds everything together. Carve the small dots first, then the gear windows, and keep the crossbar at least a finger wide so the design stays rigid.
Leaf-Eyed Smile
A grinning jack-o'-lantern face where both eyes are replaced by seven-fingered cannabis leaves, paired with a small triangle nose and a wide smile broken up by blocky square teeth. The leaves, nose, and mouth are all cut through so candlelight pours out of every shape. The leaf points are narrow, so at medium difficulty use a fine saw and cut each finger from the tip inward to keep the serrated edges crisp.
Long Pupils and Triangle Grin
A mischievous jester face topped with an arcing crown of small diamond cutouts, tall eyes with long slit pupils, diamond accents on each cheek, and a huge grin lined with pointed triangle teeth. Every diamond, eye, and tooth gap is pierced through, so the whole face sparkles like carnival lights. As an expert pattern full of tiny repeated shapes, cut all the small diamonds first with a narrow saw before opening the large mouth, which weakens the wall.
Long-Nosed Abstract Face
An abstract face in a modern-art style: a sweeping brow arc crosses the top, a long straight nose drops down the middle, curled spiral shapes form the cheeks, and short hatch marks add texture beside one eye. Each line is a pierced channel, so the portrait glows as a set of elegant strokes. At hard difficulty the narrow curved channels are the challenge; keep them at least a finger-width and undercut the edges slightly so light spreads.
Mortar and Two Split Capsules
A classic mortar bowl with its pestle angled out of the top sits above two capsule shapes, each crossed by a diagonal dividing bar. The bowl, pestle, and pill halves are cut through, with the capsule bars left as solid rind strips. This medium design makes a fun nod to a pharmacist or nurse; carve each capsule as two small windows so the center bar stays firmly attached.
Mushroom Face Pumpkin Stencil
A large mushroom cap viewed head-on occupies the center of this pumpkin stencil, with the rounded cap outlined by a wide curved arc at the top, a pair of angled brow-like ridges beneath giving it a brooding expression, two crescent-shaped gill slits, and a column of vertical stem lines below that narrow at the base into root tendrils. Several short wispy cuts at the upper right suggest spores or texture. The negative spaces between these cut shapes read as a haunting mushroom face when lit. Cut the thin gill crescents before the wider stem column to keep the central face stable.
Mushroom Pumpkin Stencil
A single large mushroom silhouette fills this pumpkin stencil, its broad rounded cap dripping with three short gill-like projections and a slender curved stem below. The entire shape is carved out as one open negative space, so candlelight pours through the whole silhouette at once. Because the stem is narrow where it meets the cap, score that junction lightly with a detail knife before cutting through fully to keep the bridge from cracking under pressure.
Political Caricature Pumpkin Stencil
A caricature portrait of a suited male figure dominates this pumpkin stencil: the subject has distinctive swept-back hair, heavy open-mouthed expression, a pointing raised finger on one hand and a fist on the other, rendered in sweeping negative-space cuts against a solid silhouette. The broad facial features, jacket lapels, and hand details are all cut through, reading as bright shapes when the jack-o-lantern is lit. Cut the fine hair and facial detail lines first while the overall shape is still rigid, then remove the larger background areas last.
Praying Mantis with Long Legs
A praying mantis poses in elegant line art, from its long antennae and triangular head down through folded forelegs and dramatically bent back legs. The design is etched, not pierced: every line is a shallow groove shaved through the skin so the insect glows as thin golden strokes. Hard-level patience pays off here; keep your groove width consistent along the spindly legs and antennae so no single line reads heavier than the rest.
Quartered Eye and Zigzag Grin
A huge single eye quartered by a bold plus-shaped bar dominates this monster mask, flanked by rows of diamond cutouts down each cheek, a tiny skull-like nose, and a jagged zigzag grin along the bottom. The eye quadrants, diamonds, nose, and zigzag are all cut through, with the plus bar and diamond lattice left as connected skin. This hard design demands order: carve the four eye sections first, then diamonds from the center outward, protecting that thin cross bar throughout.
Raised Brows and Oval Gasp
An ornamental surprised face: two big eyes striped with vertical bars sit beneath fanned brow lines, above a tall oval gasping mouth ringed by a halo of teardrop cutouts. Every bar, fan line, teardrop, and the central oval is pierced through, and the sheer number of narrow slits is what makes this an expert carve. Cut all the fine slits before the big oval, working outward from the center, so the wall keeps its strength as long as possible.
Round Eyes and Six Mouth Slots
Two big blank circle eyes stare out beneath short angled brow slits, while the wide mouth is broken into six upright rectangular slots that glow like stitched or fenced-off teeth. Everything is cut through, and the plain round eyes with no pupils give the face its unsettling, vacant charm. The vertical mouth bars keep this an easy carve; cut every slot top-down in the same direction so the strips between them stay straight and even.
Seven-Leaflet Cannabis Leaf
A symmetrical seven-leaflet cannabis leaf spread across the pumpkin's face, each serrated blade radiating from a short central stem. The leaf glows through shaved skin rather than open holes, so every jagged tooth along the edges reads clearly while the wall stays solid. A medium shading design; score the full outline first, then peel from the center of each leaflet outward so the serrations do not tear. Best saved for the adults-only party pumpkin.
Smiling Oval Alien Face
A big-eyed alien stares out from a smooth oval head, framed by a bold outline band that arcs over the brow. The huge almond eyes, brow lines, nostril dots, mouth, and head outline are all pierced through, with small connecting tabs holding the face pieces to the shell. Do not cut those tabs: the little bridges are what keep the eyes and outline from collapsing inward.
Sorrow Brows and Falling Tears
A theatrically miserable face with layered droopy brow wrinkles stacked like ribs above two barred, half-lidded eyes, a long drooping nose, and a deep striped frown, all surrounded by cascading columns of teardrops. Every wrinkle, bar, and tear is cut through, creating an ornate pattern of dozens of small openings. This expert carve is all about sequence: work from the center outward and leave the fragile tear columns at the edges for last.
Split Tooth and Two Sparkles
A giant molar with a split between its two roots gleams at the center, flanked by a four-point sparkle on each side and two small dot accents. The tooth outline is cut through around its lobed crown and twin roots, and the sparkles and dots are pierced as well, making a bright emblem any dentist would love. At medium difficulty, the pinch between the roots is the tightest cut, so saw into that notch from both sides and go slow.
Spoked Eyes and Diamond Halos
Two enormous hypnotic eyes built as spoked wheels, each iris divided by radial spokes around a glowing hub, ringed by halos of small diamond and teardrop cutouts with arched brow fans above. Every spoke gap, diamond, and teardrop is pierced individually, creating a mesmerizing lace of light. An expert carve with dozens of tiny openings; use a fine detail saw and rotate the pumpkin, not your wrist, on the curves.
Staring Eyes and Eight Wedges
Two enormous staring eyes dominate this design, each with a pupil tab left attached at the bottom rim, a curved brow arcing above, and short wedge-shaped rays radiating around the outside like a nervous twitch of light. There is no mouth, which makes the gaze even more unsettling. In this medium carve the pupil tabs are the key detail; cut around each pupil carefully so its bridge to the lower eyelid stays at least a half inch wide.
Teardrop Eyes and Three Stars
Two enormous teardrop eyes dominate this quirky alien mug, floating above a tiny triangle nose and a crooked grin made of separate oval mouth slots, with three little stars sprinkled around the face. Every eye, slot, and star is cut through, giving the pumpkin a goofy otherworldly stare. At medium difficulty, carve the huge eyes last since removing that much wall weakens the face, and keep the small oval grin slots evenly spaced.
Three Eyes and Wide Oval Mouth
A delightfully weird mutant face with three round eyes arranged in a triangle above one huge wide oval mouth. All four shapes are pierced through, and the extra eye instantly turns an ordinary pumpkin into a little alien visitor. This is an easy carve with no fragile parts; leave at least an inch of rind between the eyes and the mouth rim so the bridge stays strong.
Tilted Jellyfish and Seaweed
A tilted jellyfish drifts with its domed bell up high and dozens of ribbony tentacles flowing down through strands of seaweed, while small bubbles rise around it. Every element is shaved into the skin at varying depths rather than cut through, creating layers of soft glow. This expert etch is all about depth control: shave the bell and bubbles deepest for brightness, keep the tentacles mid-depth, and leave the seaweed shallow so the jellyfish floats forward.
Tooth and Three Lower Dots
A giant molar glows from the pumpkin, complete with its two rounded roots at the bottom, while three little dots trail beneath it like polish sparkles. The tooth is one large cut-through opening, so the only tricky spot is the notch between the roots. Cut that inner V last, after the big outline is free, and this becomes a quick, hilarious carve for any dental office porch.
Two Flasks and Five Bubbles
A triangular Erlenmeyer flask and a round boiling flask stand side by side while five bubbles of different sizes rise between and above them. Every flask body and bubble is cut straight through, so the whole experiment glows like it is mid reaction. This easy pattern only asks for patience on the small bubbles; a drill bit or corer makes those circles fast and perfectly round.
Unequal Eyes and Crooked Smile
A charmingly wonky face with one huge oval eye, one small squinting eye, and a crooked smile that tilts up at the corner. Everything cuts through, and the mismatched shapes are the whole joke, so wobbly lines only add character. This is a forgiving easy carve for kids' first attempts or oddly shaped pumpkins; cut the big eye last since the wall flexes more once the large opening is removed.
Unequal Eyes and Crooked Teeth
This lovably lopsided face pairs one round eye with one droopy crescent eye, a triangle nose, and a huge crooked grin full of uneven square teeth, plus a pair of dot dimples on each cheek. The eyes, nose, mouth, and dots are pierced while the mismatched tooth bars stay attached. It suits odd-shaped pumpkins perfectly; cut the tooth gaps in random sizes and the wonkier it looks, the better.
Unequal Eyes and Scallop Grin
A wonderfully odd face with two unequal eyes split by vertical bar pupils, a diamond nose, and a huge grin whose lower edge scallops into rounded lobes, all surrounded by constellations of freckle dots and hanging teardrop points. Everything is cut through, from the big mouth down to dozens of tiny drilled holes. This expert design is a marathon of small cuts; drill all the freckle dots first, then carve the scalloped grin so the thin borders between lobes keep support.
Unequal Gourd Surprise Eyes
Made for a bottle gourd or any tall, curvy squash, this design is a startled little face: two round eyes of slightly different sizes and a tall oval mouth frozen mid-gasp. All three shapes are cut through, and the mismatched eyes give the face its comic personality. Gourd walls are thinner and harder than pumpkin, so an easy-carve tip is to drill a pilot hole in each shape and saw slowly outward from there.
Veined Seven-Leaflet Cannabis
A detailed seven-leaflet cannabis leaf spreads across the pumpkin, each serrated leaflet shaved into the skin with its center vein and feathered side veins left as raised lines. Nothing is pierced, so the leaf reads as pale botanical relief against the dark rind day or night. This hard etch rewards patience; score every vein with a v-gouge first, then shave the leaflet panels down to a matching depth around them.
Walking Bigfoot Outline
The classic mid-stride Bigfoot pose, arms swinging, one foot lifted, framed inside a rounded panel. This is a shading design: you shave the background panel down to the pale flesh and leave the sasquatch silhouette raised in untouched orange skin. Trace the outline with a scoring tool first, then peel away from the figure toward the panel edge so you never nick the famous profile.