Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
366 results · Page 2 of 11
Cartoon Frankenstein Pumpkin Stencil
A cartoon-style Frankenstein face makes up this pumpkin stencil, built from simple geometric pieces: a wide zigzag hairline across the top, two rectangular eye blocks each containing a cut-out square, circular ear studs on both sides, a broad grinning mouth open at the bottom, and two separate curved stitch marks, one on the forehead, one near the chin. The shapes are chunky and well-separated, so the candle light reads cleanly through each element. Carve the two small curved stitch shapes before the large mouth opening so the lower face stays anchored while you work.
Cartoon Monster Pumpkin Stencil
A stocky cartoon monster stands arms-up with a wide open mouth full of jagged teeth, crescent-shaped eyes beneath rectangular brow bars, and a shaggy body outline. The design uses a dense scatter of mid-size cutouts rather than one large opening, so the lit pumpkin shows the monster as a bright orange silhouette surrounded by black negative space. Carve the rectangular brow pieces and the two tiny crescent pupils first, since they are the smallest islands and easiest to pop out while the wall is still fully supported.
Cartoon Mummy Pumpkin Stencil
A squat cartoon mummy stands front-facing in this pumpkin stencil, its head wrapped in bandage strips that curl into decorative scrolls above, while a broad grinning skull mouth with large square teeth is cut through below. The wrapped body, arms, and stubby legs are defined by horizontal bandage-strip negative spaces that blaze with light when carved. Cut the curved scroll shapes at the top of the head before tackling the body strips, as the scrolls are the most delicate elements here.
Cartoon Skull and Crossbones Pumpkin Stencil
A cartoonish skull-and-crossbones fills this pumpkin stencil: a round skull with raised eyebrow lines, two large circular eye sockets, and a lower jaw bearing six stitched teeth sits at the center, while four bone ends with rounded knobs extend diagonally from behind it. The eye sockets, teeth gaps, and bone end circles are all pierced through, creating rings of glowing light that contrast with the solid skin bridges holding the design together. Carve the six small tooth gaps before tackling the larger eye socket circles to preserve the jaw structure.
Cartoon Spider Pumpkin Stencil
A cartoonish spider hanging from a single thread pumpkin stencil, with a wide spiky thorax section, four curved legs extending from each side, and a round head featuring a ring of small eyes above a smiling mouth with fangs. The open areas between the legs cut through to the light, while the solid spider body and thick leg stripes remain as orange pumpkin skin. The thin thread line at the top is the most vulnerable detail; pierce it last and use a linoleum cutter rather than a saw so it does not snap under lateral pressure.
Cartoon Vampire Pumpkin Stencil
A cartoonish chibi-style vampire stands front-facing on this pumpkin stencil, wearing a sweeping cape, a bow tie, and an impish grin showing two prominent fangs. The face details, hands, cape folds, and bow tie are all separate cut-out islands surrounded by solid pumpkin bridges. Start with the smallest interior islands such as the round cheek circles and the bow tie before cutting the large cape sections, so those tiny pieces are supported by a still-intact wall when you trace them.
Castle Windows and Arched Door
The pumpkin itself becomes a castle: square battlement windows march across the top, tall rectangular windows flank the sides, and a grand arched doorway glows at the center. Every opening is a straightforward cut-through shape with wide rind walls between them, which is why this rates easy. Keep at least a finger's width of rind between neighboring windows as you cut so the castle wall stays sturdy, and square up corners with short poke cuts.
Chamomile Flower Pumpkin Stencil
A daisy-like chamomile flower with a round center disc, about fourteen smooth rounded petals radiating outward, a curving stem, and two smooth teardrop-shaped leaves forms this flower pumpkin stencil, with each petal and the leaves cut as individual open shapes separated by thin skin ridges. When lit, the individual petals glow like a ring of light around the solid center button, and the stem and leaves add a botanical silhouette below. Cut the two leaf shapes at the base first so the stem is fully supported, then work petal by petal around the flower head from bottom to top to avoid rotating the pumpkin repeatedly over a weakened stem area.
Cheerful Snail & Spiral Shell
A grinning cartoon snail with a big spiral shell, a smiling face, and two ball-tipped eye stalks glows warmly from the pumpkin front. The design is shaved rather than pierced, with narrow ridges of skin left in place to define the spiral bands, body curve, and happy face. It earns its hard rating from those thin dividing ridges; shave the spiral from the center outward and keep your blade shallow so the ribs survive.
Cloudy Moon Campsite
A cozy campsite spreads across the pumpkin: a striped A-frame tent between pine trees, a crackling campfire, and a full moon drifting behind wispy clouds. The scene is shaved into the skin rather than pierced, so light glows softly through the thinned areas at different strengths. For this hard shading job, carve the brightest spots like the fire and moon deepest, and keep the trees and clouds shallower to build a layered nighttime look.
Coiled Snake Pumpkin Stencil
A coiled snake in an S-curve fills this hard pumpkin stencil, its body broken into roughly twenty irregularly shaped scale-pattern segments separated by thin cut lines, with a small triangular head visible at the upper left and the tail tapering to a narrow point at the bottom. When lit, the gaps between scale segments glow white-hot against the orange pumpkin bridges, making the snake's banded pattern pop. Start cutting at the tail tip, where the segments are smallest and most fragile, then work up the body toward the larger mid-coil pieces.
Confused Jack-o-Lantern Pumpkin Stencil
A crooked, puzzled face expression built from two unequal eyes and a wide zigzag mouth forms this easy pumpkin stencil. The left eye is a narrow horizontal slit while the right eye is a large irregular quadrilateral, and both sit below a single small tapered eyebrow. The mouth is a long jagged zigzag cut with peaks and valleys of different heights, giving the whole face a bewildered, off-kilter look. When lit, the mismatched eyes and frantic zigzag line are immediately readable across the yard. Cut the zigzag mouth with short, angled plunge cuts at each peak rather than one long sweeping stroke to keep each point crisp.
Connecticut Pumpkin Stencil
Connecticut's compact, slightly irregular state outline fills this easy pumpkin stencil: a roughly rectangular silhouette with a gentle concave nick at the lower-right corner and subtly wavy edges that trace the actual border contours. The entire shape cuts out as a single piece, glowing in isolation against the uncut orange pumpkin skin. Because the outline has no interior detail, the challenge is keeping the thin shell border even, so use a small detail saw and rotate the pumpkin rather than repositioning your hand at the tight lower-right corner.
Cool Dude Sunglasses Pumpkin Stencil
A cartoon face with swept-back windswept hair, heavy brow, and large wraparound sunglasses fills this hard halloween pumpkin stencil, the lenses, hair wisps, and facial contours all rendered as separate cut sections connected by thin skin bridges. Lit from inside, the open sunglasses lenses glow brightly while the raised brow and cheek lines stay solid, giving the face a streetwise, sunlit look in reverse. The thin strands of hair near the temple are the most fragile bridges, so cut them after all the larger facial sections are removed.
Cornucopia Pumpkin Stencil
A harvest cornucopia brimming with a small pumpkin, an apple, and assorted gourds fills this pumpkin stencil, with decorative swirling vines and leaf shapes radiating outward from the basket's opening. The woven horn body is built from curved concentric stripe cutouts, while the produce and vine scrolls are independent pierced-through elements against the solid surrounding wall. Cut the small vine scroll tips and round fruit openings before tackling the long curved stripe cuts in the horn body, as the stripe cuts pass close to each other and benefit from the surrounding wall being intact.
Couple Silhouette Heart Pumpkin Stencil
Two facing human profiles, one with short-cropped hair and one with a pointed ear detail, are arranged nose-to-nose inside a heart shape so their silhouettes form both the couple and the lobes of the heart on this easy romantic pumpkin stencil. The large heart interior is cut away entirely on each side of the profiles, while the facing figures remain as solid dividers. The narrow chin-to-chest strip between the two faces is the key bridge; run your blade along each profile edge independently rather than trying to cut the gap in a single pass.
Cowboy Skull Pumpkin Stencil
A grinning cowboy-hat skull faces three-quarters toward the viewer, its wide-brimmed hat battered and torn along the crown. Hollow eye sockets and an open jaw with individually delineated upper and lower teeth are pierced through, while the hat brim, cheekbones, and nose cavity form a complex arrangement of solid bridges. Flame wisps curl at the chin. When lit, the teeth row and eye sockets glow against the dark skull mass, creating a hard-boiled undead outlaw look. Cut each tooth gap individually rather than sweeping through the whole row to keep the ridges crisp.
Cracked Skull Pumpkin Stencil
A side-facing human skull, cracked and fragmented, makes up this dramatic pumpkin stencil. Jagged fracture lines split the cranium into separate floating pieces, a single large orbital socket sits center-left, a smaller eye socket appears at the right, and the jaw opens to reveal ragged broken teeth. The intact pumpkin skin forms the skull fragments themselves while the large skull cavity, orbital holes, and tooth gaps are cut away. Carve the thin fracture-line gaps between skull fragments carefully and early, then work outward to the large open skull interior.
Crescent and Four Stars
A thick crescent moon anchors the left side of the pumpkin while four five-pointed stars drift across the remaining space. All five elements are clean cut-through openings, so the pumpkin becomes a night-sky lantern with the untouched rind acting as the dark sky between them. It is an easy carve overall; the only care point is the star tips, so cut each star point-to-center in single strokes rather than trying to steer around the whole outline at once.
Crescent and Three Stars
A large crescent moon curves down one side of the pumpkin while three five-point stars of different sizes float beside it. All four shapes are cut cleanly through the wall, turning the pumpkin into a glowing night sky that is simple enough for a first-time carver. Since this easy design relies on smooth curves, trace the crescent's inner arc slowly and pop each star out point by point rather than in one piece.
Crescent Eyes and Curved Smile
Pure cheer: two upturned crescent eyes squint with delight above a huge toothless smile that curls up at both corners. All three shapes are pierced through so the whole face beams with candlelight, and the matching curves give it a warm, laughing character. This easy pattern rewards smooth cutting; saw each crescent in one steady motion following the curve, and round off the smile's corners rather than leaving sharp points.
Crescent Moon & Small Bat
A small bat with scalloped wings glides across a big crescent moon in a classic Halloween night scene. Both shapes are shaved rather than pierced: the moon is peeled into a bright smooth crescent, the bat's wings are etched at a lighter depth, and its body stays as raised rind. A hard shading pattern that rewards patience; keep the moon's inner curve clean since that long sweep frames the entire design.
Crescent Moon and Star Pumpkin Stencil
A large crescent moon curves across most of the design while a single five-pointed star sits nestled in the open interior of the crescent in this easy space pumpkin stencil, both shapes carved as open silhouettes. The crescent is a large single cut, and the small star inside it is a separate isolated piece that must be removed independently. Cut the star's five points with precise plunge cuts at each tip before slicing the connecting straight sides, then remove the star before carving the surrounding crescent so your hand has room to maneuver.
Crescent with Diamond Halo
A bold crescent moon sits at the center of a decorative halo made of alternating circle and diamond openings. Everything is cut fully through, and the ring of small shapes scatters points of light around the big central glow for a celestial, almost boho look. Carve the crescent first, then work around the halo one shape at a time, spacing your cuts so the rind bridges between openings stay sturdy.
Cross Pumpkin Stencil
A large rugged cross pumpkin stencil with slightly tapered arms and a weathered, hand-drawn outline that gives it an organic, aged character rather than a rigid geometric look. The entire cross shape cuts through as a single opening, and because the arms are wide, the resulting jack-o-lantern casts a bold cross-shaped beam of light. A cross this size removes a substantial amount of shell, so thin the interior pumpkin wall to about half an inch before carving to reduce the risk of the outer edges cracking under the weight of the cut.
Crouching Gargoyle Pumpkin Stencil
A crouching gargoyle with spread bat wings, a fanged open jaw, and clawed feet fills this hard pumpkin stencil. The wings are rendered as multiple angled blade-like panels, the body and head form a compact central mass, and the whole figure is composed of closely spaced pierce-throughs separated by narrow pumpkin-wall bridges. Lit from within, the gargoyle appears as a fiery orange silhouette. Begin with the head and jaw details before cutting the wing panels, since the narrow bridges connecting the wing sections to the body spine are the most structurally critical lines in this design.
Cruise Ship Pumpkin Stencil
A large cruise ship viewed from a slight bow-angle fills this hard pumpkin stencil. Four tall rectangular smokestacks rise from the upper deck, the bridge superstructure runs along the top, and five circular portholes line the hull below the waterline. The design reads as a series of rectangular and circular cutouts separated by solid pumpkin strips. When lit, the port holes and superstructure windows glow individually like a ship at sea. Carve the five round portholes first since circular cuts benefit most from a fresh blade, then work upward through the rectangular deck openings.
Curved Ball and Two Stars
A giant tennis ball dominates the pumpkin, its two big panels pierced through and separated by the signature curved seam left as an attached band of shell, with a small star cut on either side. The sweeping seam is the make-or-break piece, so cut both panel edges toward the seam rather than across it and keep the band at least a finger wide for strength.
Cute Horned Monster Pumpkin Stencil
A chubby, wide-eyed cartoon monster with curved horns, small bat-like wings spread to either side, a smiling mouth, and stubby feet sits inside a large circular opening on this easy pumpkin stencil. The circular background and small body details are pierced through, leaving the round monster figure itself as a solid silhouette at the center. Because the circular outer ring is cut away entirely, score and remove it in segments rather than one piece to keep control of the blade near the wing tips.
Cute Skull Pumpkin Stencil
A cute, stylized skull face looks straight out of this beginner pumpkin stencil, with two large round eye sockets and a small triangular nose cut through, all enclosed in a rounded skull outline broken into arc segments. The lower jaw shows four chunky teeth separated by gaps, and small curved cheekbone accents frame the face. Because the skull outline is split into separate arcs rather than one continuous ring, carve each arc segment individually so the gaps between them stay crisp.
Cyclops Monster Pumpkin Stencil
This one-eyed monster face jack-o-lantern stencil pairs a massive single eye opening at the top, with a crescent of solid orange forming the pupil island, with a lower face panel bearing a triangular nose and a wide blocky grin of square teeth. Both sections are fully cut through, flooding the pumpkin face with light. Keep the thin orange strip separating the upper eye section from the lower mouth panel intact as a structural bridge until the very last cut.
Dachshund Silhouette Pumpkin Stencil
A dachshund in profile fills this easy dog pumpkin stencil, its long low body, short front and back legs, small rounded head, and thin tail all rendered as a single clean silhouette. The entire dog shape is cut away as one open piece, so the lit jack-o-lantern casts a bright dachshund outline against the orange pumpkin wall. The tail tapers to a fine point at the top, so finish that cut last with a single smooth stroke rather than sawing back and forth, which can tear the thin tip.
Dancing Girl Pumpkin Stencil
A small cartoon girl with a ponytail stands with arms spread wide in this pumpkin stencil, her entire silhouette carved as a single large opening surrounded by six small four-petal flower cutouts scattered around her. The figure and each flower are separate pierced-through shapes, so the finished jack-o-lantern shows a glowing girl dancing among floating blooms. Cut the six small flower shapes first so the surrounding pumpkin wall absorbs tool pressure before you open the larger central figure.
Darwin Fish Pumpkin Stencil
The iconic Darwin fish emblem fills this pumpkin stencil as a horizontal fish silhouette with small walking legs at the bottom, the word DARWIN lettered inside the body using bold block capitals separated by vertical post bridges. Both the fish background and the letter interiors are cut through, so the orange bridges spelling out DARWIN glow as solid bars when lit. Carve the background fish outline opening first, then cut each letter interior separately to keep the thin vertical bridges from flexing and cracking.
Deer Skull and Rifles Pumpkin Stencil
Two crossed hunting rifles sit below a buck's-head silhouette with a full multi-point rack of antlers, forming a classic skull-and-crossbones arrangement in a hunting theme. All three elements are cut out as open silhouettes, so the rifles and antlers glow as bright orange shapes against the dark pumpkin. The junction where the rifle stocks cross is a narrow pinch point; trace that intersection carefully and cut each rifle as a separate pass rather than one continuous stroke to preserve the crossing bridge.
Demon Tree Pumpkin Stencil
A demonic tree creature roars from this expert pumpkin stencil: a gnarled trunk rises from spreading roots, branching into twisted limbs with curling twig tendrils, while a menacing face with jagged saw-tooth teeth and hollow eye cavities glares from the center. Dozens of thin, curving cut sections radiate outward, separated by very narrow orange bridges. Work from the outermost twig tips inward toward the central face to avoid snapping the thin outer branches while the interior is still supported.