Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
212 results · Page 4 of 6
Massachusetts State Shape
The Massachusetts silhouette stretches across the pumpkin, complete with the unmistakable curled hook of Cape Cod flexing off the eastern end. The entire state is cut through as one opening so the whole commonwealth glows. That skinny Cape Cod arm is the trickiest part of this medium carve; leave it for last, support the wall with your free hand, and use gentle strokes so the curl does not tear loose.
Michigan Mitten Shape
Michigan's Lower Peninsula carved as one big glowing mitten, complete with the thumb of Saginaw Bay and the ragged shoreline notches along the lakes. The full state shape is cut through, so accuracy along that coastline is the whole challenge, which is what pushes this one to hard. Trace the outline with a fine saw, work the tight bay curves in several passes, and remove the waste piece in halves to protect the thumb.
Minnesota State Shape
The full outline of Minnesota carved as one glowing state-shaped window, from the flat southern border up to the jagged Arrowhead along Lake Superior. The entire silhouette is cut through in a single piece, leaving the surrounding pumpkin wall to frame it. Take your time on the notched northeast shoreline, sawing gently along each small zigzag, and pop the big piece out in sections rather than all at once.
Mississippi State Shape
Mississippi's tall rectangular profile carved as one bold cutout, complete with the wiggly river border on the west side and the small boot notch at the Gulf. The whole state is removed to glow, and the surrounding rind stays intact as the frame. A medium carve where the river edge does most of the work; saw those little curves slowly and leave the long straight eastern border for your final cut.
Missouri State Shape
The unmistakable outline of Missouri, complete with its bootheel corner, carved as one large glowing state silhouette. The entire state shape is cut fully through the wall, so the opening blazes with candlelight and reads clearly from across the yard. At medium difficulty the main challenge is the wiggly eastern river border, so follow those small curves slowly with a fine saw and remove the big waste piece in sections.
Monster Truck Pumpkin Stencil
A side-view monster truck with massive knobby tires dominates this expert pumpkin stencil: two oversized wheels with five-spoke rims, a high-clearance suspension chassis visible between the tires, a boxy cab with window cutouts, a wide front bumper, and flame or dragon graphics on the door panel. The many narrow bridges connecting the chassis rails and the spoke details inside each wheel make this a demanding carve. Cut the interior cab windows and bumper slots first, then tackle the five spokes of each wheel one at a time, always working away from the thin axle hub at the center.
Moon & Stars Over Hills
A crescent moon hangs over a band of rolling hills while four small stars dot the sky above. Nothing is pierced: you shave away only the skin inside the moon, stars, and hill line, leaving a thin wall that glows soft amber when lit. Keep your shaving depth even, about a quarter inch, so the moon and hills light up at the same brightness across the whole scene.
Moon with Five Stars and Dots
A large crescent moon anchors the center of the pumpkin while five stars and a sprinkling of small round holes orbit around it. Every element is pierced through the wall, so the finished carve reads as a glowing night sky from across the yard. Carve the crescent first since it is the largest opening, then add the stars, sawing each point from the tip toward the center for clean corners.
Moonlit Tent & Campfire
A cozy campsite scene: a peaked tent with an open door flap, a crackling campfire on crossed logs, two pine trees, and a full moon overhead. It is all continuous-wall shading, so you shave each shape down to glowing flesh while the orange skin between them stays untouched. Etch the largest areas like the tent walls first, then refine the flame tips and pine branches with a small gouge for clean edges.
Mortar and Tilted Pestle
A footed mortar bowl with a tilted pestle resting across its rim, the timeless symbol of pharmacists and potion mixers alike. The bowl, base, and pestle are carved as one connected cutout so the whole emblem glows in a single bright shape. An easy pattern with mostly smooth curves; keep the narrow bridge where the pestle meets the bowl rim intact, and this one is done in a single relaxed sitting.
Mortar and Two Split Capsules
A classic mortar bowl with its pestle angled out of the top sits above two capsule shapes, each crossed by a diagonal dividing bar. The bowl, pestle, and pill halves are cut through, with the capsule bars left as solid rind strips. This medium design makes a fun nod to a pharmacist or nurse; carve each capsule as two small windows so the center bar stays firmly attached.
Motorcycle Pumpkin Stencil
A side-profile motorcycle fills this hard pumpkin stencil with mechanical detail: the front fork and handlebars, a sculpted fuel tank, streamlined seat fairing, and two large concentric-ring wheels. The design uses a mix of solid pumpkin bridges and open cut areas so the bike reads as a crisp silhouette when the jack-o-lantern is lit. The thin fork tubes and the thin strip separating the seat from the rear fairing are the most fragile elements. Carve the two large wheel ring sections first to establish the bottom of the composition before working inward through the frame details.
Mountain Wolf Scene Pumpkin Stencil
This expert-level pumpkin stencil presents a layered wilderness panorama: jagged mountain peaks and a partially obscured moon sit above a mid-ground of ridgelines, while the foreground holds a row of spiky pine trees and a tiny howling wolf on a plateau. Dozens of separate cut-through shapes at varying scales build depth across the whole composition. Tackle the tiny wolf and the narrowest tree spires first, as those fragile points are easiest to cut cleanly before surrounding sections are removed and the pumpkin wall softens.
Nevada State Shape
Show some Silver State pride with this bold Nevada silhouette. The entire state shape is removed as one large cutout, so its distinctive angled eastern border and long southern point glow as a single clean panel of light. With no interior details and mostly straight edges, it is a quick, forgiving carve; use a ruler to trace the long diagonal so the line stays perfectly straight from corner to tip.
New Hampshire State Shape
The unmistakable tall, tapering outline of New Hampshire, cut fully through as one glowing state silhouette. Everything inside the border comes out, leaving the surrounding rind as the dark frame that defines the shape. This medium carve is one large opening, so work in short, connected saw strokes around the jagged northern border and remove the piece in two or three sections instead of forcing out one big slab, which can tear the notched edges.
New Jersey State Shape
The outline of New Jersey is carved as a single tall opening, so the whole Garden State glows from the pumpkin wall. Everything inside the border gets cut away while the surrounding rind frames the familiar shape, from the northern notches down to the pointed Cape May tip. Take the jagged northeastern coastline slowly with short saw strokes; the small angles there define the state at a glance.
New York State Shape
The Empire State glows in full detail, from the straight Pennsylvania border to the jagged Adirondack edges and the skinny finger of Long Island trailing off the bottom right. The entire state interior is one pierced opening. Long Island is the trickiest part, so cut that narrow strip last with the tip of your saw and support the surrounding shell with your free hand as you work.
Nine Triangles and Six Dots
Nine triangles in alternating sizes form a tidy three-by-three grid, with six small round dots tucked into the gaps between rows. Each triangle and dot is cut straight through, producing a clean modern lantern that glows like patterned tilework. This medium design is all about alignment, so tape the template securely, transfer every corner point before cutting, and carve the triangles row by row to keep the grid looking sharp and even.
Ninja Warrior Pumpkin Stencil
A stocky ninja warrior in a fighting stance holds a broad katana raised overhead in this easy pumpkin stencil. The figure is nearly a solid silhouette pierce-through, with just a few interior slots carved at the belt sash and the chest opening to add definition. The diagonal sword blade extends well above the head, making it the widest point of the design. Transfer the sword line with care and cut it in a single continuous stroke so the blade stays perfectly straight when lit.
North Carolina State Shape
North Carolina stretches across the pumpkin as one long glowing cutout, from the pointed western mountain tip to the fringed Outer Banks coastline on the right. The entire state interior is removed so the distinctive wedge shape reads clearly at night. Rated hard because of the fine barrier-island fingers along the coast; cut the smooth northern border first, then work the ragged eastern edge slowly with a detail saw, leaving the thinnest points for last.
Ohio State Shape
Ohio's rounded river-border silhouette is cut out as a single glowing shape, with the wavy southern edge and squared northern corners removed clean through the wall. The surrounding pumpkin stays whole, so the map reads instantly from across the yard. Trace the bumpy Ohio River edge slowly with a fine saw; the rest of the outline is gentle curves and easy straightaways.
Oklahoma State Shape
Oklahoma's distinctive silhouette, from the long skinny panhandle to the notched southern border, cut fully through so the entire state shines as a single lit shape. The interior is removed in one large piece while the rest of the pumpkin stays solid. Because the panhandle is a narrow strip, this medium design carves best if you cut that section last and support it with your free hand as you finish.
Open-Jawed T-Rex
An open-jawed T-Rex strides across the pumpkin in full profile, tiny arms forward and thick tail sweeping behind. The entire dinosaur is a shaded silhouette: shave away the skin inside the body so the shape shows as a lighter panel against the orange rind, with no pierced holes. At medium difficulty, outline the jaws, claws, and tail tip carefully first, since those narrow points define the whole silhouette when the sun or candle hits it.
Oregon State Shape
Oregon's broad, boxy outline carved as one glowing window, with the Columbia River notch along the top and the gentle Pacific curve on the left. The full state shape is cut through so the candle lights it edge to edge, framed by solid rind. A friendly medium carve since most borders are long and straight; steady the blade through the northern river squiggle and the rest goes quickly.
Peace Sign Pumpkin Stencil
A large peace sign fills the pumpkin face in this easy pumpkin stencil: a bold outer ring interrupted by four gaps, a vertical center bar, and two diagonal lower bars all pierced through, with the spaces between them staying solid. When lit, the candlelight glows through the ring segments and the three bar slots, mapping the familiar peace symbol in orange light. Because the ring has four gaps that nearly isolate four arc sections, cut the two lower arcs last to keep them braced while the upper cuts are made.
Pineapple with Layered Crown
A plump pineapple with a full crown of layered, curling leaves and a body covered in the fruit's signature diamond lattice texture. It carves as continuous-wall relief: the fruit is shaved into the skin at different depths so the crosshatched skin and overlapping leaves stand out dimensionally, with nothing cut through. This hard design goes smoothest if you carve the diamond grid with two sets of parallel angled grooves before shaping each leaf individually.
Pineapple with Split Crown
A plump pineapple with a dramatic split crown of long, splayed leaves and a body filled with a deep diamond crosshatch pattern. The whole design is skin-shave work: leaves and body are peeled to bright flesh while crosshatch grooves are cut deeper for a woven texture. Score the diamond grid lightly with a ruler-guided knife before carving so the lattice stays even across the pumpkin's curve.
Pirate Pumpkin Stencil
A grinning pirate face topped by a tricorn hat is the subject of this hard pumpkin stencil: a skull-and-crossbones badge on the hat brim, a round-brimmed hat spreading wide, a leather eye patch over one eye, a weathered face with deep laugh lines, a broad toothy smile, and a pointed goatee at the chin. The lit design reveals a cheerful swashbuckler portrait full of character. Cut the small skull-and-crossbones elements on the hat first while the surrounding skin is firm, then work down through the face, saving the wide hat brim last.
Pirate Skull Pumpkin Stencil
A grinning pirate skull wearing a broad tricorn hat dominates this expert-level pumpkin stencil, with a second miniature skull-and-crossbones badge emblazoned on the hat brim. Dense cutwork in the teeth row, eye sockets, and hat badge creates many small isolated pieces held together by narrow bridges of pumpkin flesh. Begin with the tiny crossbone details on the hat badge while your hands are freshest, then move to the eye sockets and finally the toothed lower jaw.
Pirate Skull with Parrot Pumpkin Stencil
A weathered pirate skull in a battered tricorn hat stares out from this expert pumpkin stencil, a parrot perched on the skull's head and tattered coat lapels framing its hollow cheeks. The skull-and-crossbones badge on the hat, individual finger bones along the bottom, and ragged coat edges create dozens of intricate cut sections. Carve the small hat badge first, then the interior face hollows, before moving outward to the flowing coat edges where the thinnest bridges live.
Plain Fire Helmet Silhouette
A traditional firefighter helmet in bold silhouette, showing the raised front shield, domed crown, and long swooping rear brim that flares out to protect the neck. The entire helmet is cut through as one large opening, so it glows as a single unmistakable emblem. This easy tribute carve works great on a big pumpkin; cut the long brim curve in one slow continuous pass to keep its sweep smooth.
Plain Plus and Four Round Dots
A bold plus symbol sits at the center with four round dots anchoring the corners, a clean five-hole design that reads instantly from the street. The cross and dots are all cut straight through, with no fragile details anywhere on the pattern. A great pick for nurses, EMTs, and first-aid fans: use a ruler when transferring the design so the cross arms stay perfectly square.
Plain Thumbs Up Relief
The classic thumbs-up hand, thumb raised high over four curled fingers, presented as a bold etched panel on the pumpkin's face. No holes are pierced; you shave the outer skin inside the hand outline so the pale flesh forms the gesture, leaving thin rind lines to separate the fingers. Keep the shaved depth even and stop at each finger line so the knuckle ridges stay dark and readable.
Praying Mantis with Long Legs
A praying mantis poses in elegant line art, from its long antennae and triangular head down through folded forelegs and dramatically bent back legs. The design is etched, not pierced: every line is a shallow groove shaved through the skin so the insect glows as thin golden strokes. Hard-level patience pays off here; keep your groove width consistent along the spindly legs and antennae so no single line reads heavier than the rest.
Pterodactyl & Unequal Wings
A soaring pterodactyl caught mid-flight, with one wing swept high and the other stretched wide, a long crested head, open beak, and trailing legs. The whole silhouette is shaded by shaving away the skin, so the pale flying reptile appears against the darker pumpkin without any pierced holes. At medium difficulty the key is the wing edges: score the outline first with a light pass, then scrape inward so the membrane shapes stay crisp.
Queen Portrait Pumpkin Stencil
An elderly queen in full regalia looks forward from this pumpkin stencil, her curly hair framing a detailed face with distinct brows, eyes, and lips, topped by an ornate crown bearing a cross, leaf shapes, and decorative elements. The portrait is built from dozens of small and medium cut sections across the hair, face, and jeweled bodice, with thin orange bridges holding the likeness together. Begin with the smallest crown ornament shapes at the very top before moving to the face, since removing the large hair sections early would flex the wall and risk tearing the delicate facial bridges.