Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
803 results · Page 4 of 23
Connecticut State Shape
Connecticut glows as a single bold cutout, its mostly straight northern and western borders framing the wavy Long Island Sound coastline along the bottom, with the little southwestern panhandle jutting toward the corner. The whole state shape is removed so light fills the silhouette edge to edge. An easy carve overall; start with the straight border lines, then follow the gentle coastal bumps freehand without worrying about perfection.
Corgi Pumpkin Stencil
A fluffy corgi puppy sits front-facing on this dog pumpkin stencil, its large upright ears, round eyes with pupils, small round nose, and thick fur ruff all rendered in fine irregular cut lines that break the coat into tufts of light and shadow. The design has many small to medium cut sections across the face and body connected by thin fur-texture bridges. When lit, the corgi face glows warmly with every fur gap illuminated. Cut the small facial features first: the pupil circles inside the eyes, the nose, and the mouth line, before tackling the broader chest and body sections.
Cornucopia Pumpkin Stencil
A harvest cornucopia brimming with a small pumpkin, an apple, and assorted gourds fills this pumpkin stencil, with decorative swirling vines and leaf shapes radiating outward from the basket's opening. The woven horn body is built from curved concentric stripe cutouts, while the produce and vine scrolls are independent pierced-through elements against the solid surrounding wall. Cut the small vine scroll tips and round fruit openings before tackling the long curved stripe cuts in the horn body, as the stripe cuts pass close to each other and benefit from the surrounding wall being intact.
Couple Silhouette Heart Pumpkin Stencil
Two facing human profiles, one with short-cropped hair and one with a pointed ear detail, are arranged nose-to-nose inside a heart shape so their silhouettes form both the couple and the lobes of the heart on this easy romantic pumpkin stencil. The large heart interior is cut away entirely on each side of the profiles, while the facing figures remain as solid dividers. The narrow chin-to-chest strip between the two faces is the key bridge; run your blade along each profile edge independently rather than trying to cut the gap in a single pass.
Crescent and Eight Stars
A large crescent moon curves along one side of the pumpkin while eight stars of varied sizes scatter across the rest of the face. Moon and stars are all cut-through openings, turning the pumpkin into a bright celestial lantern with plenty of glow for a dark porch. Eight stars push this to a medium carve simply on repetition, so rotate the pumpkin as you go and cut every star point with a pull stroke toward the center for clean tips.
Crescent and Four Stars
A thick crescent moon anchors the left side of the pumpkin while four five-pointed stars drift across the remaining space. All five elements are clean cut-through openings, so the pumpkin becomes a night-sky lantern with the untouched rind acting as the dark sky between them. It is an easy carve overall; the only care point is the star tips, so cut each star point-to-center in single strokes rather than trying to steer around the whole outline at once.
Crescent and Four-Ray Sun
A tall crescent moon pairs with a four-ray sun whose points frame a solid circle of rind at its center, creating a striking celestial emblem. The crescent and the four triangular rays are pierced through, while the sun's middle disc stays attached as a floating island of pumpkin skin. At medium difficulty, cut the four rays individually and avoid nicking the center circle's edge, since that untouched disc is what makes the sun read.
Crescent and Seven Teardrops
A tall crescent moon anchors the left side of this celestial design while a fan of seven teardrop rays arcs around its open curve like scattered moonbeams. Every shape is pierced through, so the crescent throws a big wash of light and the teardrops sparkle around it. Cut the crescent first for this medium design, then do the teardrops smallest to largest; angling your saw slightly outward makes each little petal pop out cleanly.
Crescent and Six Falling Dots
A slender crescent moon hangs in the upper corner while a diagonal trail of small round dots falls away beneath it, like fading moonlight. Each shape is pierced through, and the tiny dots do most of the sparkle work against the dark shell. For this easy pattern, punch the dots with an apple corer or drill bit for perfect circles, then saw the thin crescent in two smooth passes.
Crescent and Three Stars
A large crescent moon curves down one side of the pumpkin while three five-point stars of different sizes float beside it. All four shapes are cut cleanly through the wall, turning the pumpkin into a glowing night sky that is simple enough for a first-time carver. Since this easy design relies on smooth curves, trace the crescent's inner arc slowly and pop each star out point by point rather than in one piece.
Crescent Eyes and Broad Smile
Two upswept crescent eyes squint with joy above an enormous open smile that stretches nearly the full width of the pumpkin, curling up into playful points at each corner. Just three cut-through openings make the whole face, with no nose, teeth, or fragile bits anywhere. This easy design is pure beginner fun; carve the big smile first while the wall is strongest, then the two eye crescents, angling your blade slightly outward so the pieces push free cleanly.
Crescent Eyes and Curved Smile
Pure cheer: two upturned crescent eyes squint with delight above a huge toothless smile that curls up at both corners. All three shapes are pierced through so the whole face beams with candlelight, and the matching curves give it a warm, laughing character. This easy pattern rewards smooth cutting; saw each crescent in one steady motion following the curve, and round off the smile's corners rather than leaving sharp points.
Crescent Moon & Small Bat
A small bat with scalloped wings glides across a big crescent moon in a classic Halloween night scene. Both shapes are shaved rather than pierced: the moon is peeled into a bright smooth crescent, the bat's wings are etched at a lighter depth, and its body stays as raised rind. A hard shading pattern that rewards patience; keep the moon's inner curve clean since that long sweep frames the entire design.
Crescent Moon and Star Pumpkin Stencil
A large crescent moon curves across most of the design while a single five-pointed star sits nestled in the open interior of the crescent in this easy space pumpkin stencil, both shapes carved as open silhouettes. The crescent is a large single cut, and the small star inside it is a separate isolated piece that must be removed independently. Cut the star's five points with precise plunge cuts at each tip before slicing the connecting straight sides, then remove the star before carving the surrounding crescent so your hand has room to maneuver.
Crescent Seven Stars Six Dots
A large crescent moon glows at the left while seven chunky five-point stars and six round dots scatter across the rest of the pumpkin like a full night sky. Every moon, star, and dot is pierced through, so the whole surface twinkles when lit. Space your cuts out as you go, alternating sides of the pumpkin, so the wall keeps its strength until the final star is freed.
Crescent Sun and Three Dots
A slim crescent moon faces a round sun ringed by teardrop-shaped ray openings, with a trail of three dots descending below the sun. Every element is pierced through, and the varied hole sizes give the lit pumpkin a layered celestial sparkle. Drill or poke the three small dots first while the wall is still rigid, then cut the teardrops, and save the big crescent and sun circle for last.
Crescent Wink and Two Teeth
A playful winking face with one big round open eye, one crescent-shaped winking eye, and a broad open smile showing two square teeth. All the features are simple pierced openings with plenty of solid pumpkin between them, so the face is sturdy and beginner friendly. For this easy carve, cut the large smile first while the wall is strongest, then finish with the crescent wink, angling your blade slightly outward for a clean curve.
Crescent with Diamond Halo
A bold crescent moon sits at the center of a decorative halo made of alternating circle and diamond openings. Everything is cut fully through, and the ring of small shapes scatters points of light around the big central glow for a celestial, almost boho look. Carve the crescent first, then work around the halo one shape at a time, spacing your cuts so the rind bridges between openings stay sturdy.
Cross Pumpkin Stencil
A large rugged cross pumpkin stencil with slightly tapered arms and a weathered, hand-drawn outline that gives it an organic, aged character rather than a rigid geometric look. The entire cross shape cuts through as a single opening, and because the arms are wide, the resulting jack-o-lantern casts a bold cross-shaped beam of light. A cross this size removes a substantial amount of shell, so thin the interior pumpkin wall to about half an inch before carving to reduce the risk of the outer edges cracking under the weight of the cut.
Cross With Ten Rays
A bold cross anchors the center of the design while ten tapered rays burst outward around it like beams of light. The cross and every ray are pierced through, leaving dark shell between them that frames the radiating pattern. Cut the large cross first to relieve pressure on the wall, then work each ray from its wide outer end toward the narrow tip so the points finish clean.
Crossed Eyes and Buck Teeth
Huge crossed googly eyes sit under raised brow slots while a gaping oval mouth shows off two goofy buck teeth, with freckle dots on each cheek. The eyes, brows, mouth, and dots are all pierced through, and the dark pupils and teeth are rind left attached inside the openings. Those attached pupils and teeth are the tricky bit; cut around them slowly and leave their connecting bridges generously wide.
Crossed Hockey Sticks and Puck
Two hockey sticks cross in a big X with taped blades angled outward and a puck resting between them at the bottom. This shaded design is carved on a continuous wall, shaving the sticks and puck out of the skin so they glow without any pierced holes, and the blade tape lines stay as raised strips. Keep your shave depth even along both shafts so the long straight lines light uniformly from top to bottom.
Crossed Hockey Sticks Pumpkin Stencil
Two crossed hockey sticks dominate this jack-o-lantern stencil, their long shafts forming an X at center with the curved blade ends fanning out left and right; a small round puck sits below the crossing point. The stick shafts are cut as long thin negative spaces flanking the solid X-shaped pumpkin skin bridge, and each blade features short hatching cuts that add texture on the lit pumpkin. Leave the central skin bridge where the two shafts cross untouched last so the structure stays rigid while you complete the outer blade details.
Crossed Sticks and Three Dots
Two hockey sticks cross in a bold X with their curved blades flaring outward at the bottom, a round puck resting between them, and three small dots arcing above like arena lights. The sticks, puck, and dots are all pierced through, leaving a crisp diamond of pumpkin at the center of the X. At medium difficulty that center diamond is the fragile piece, so cut the four stick channels one at a time and never lever the knife against it.
Crouching Spider Pumpkin Stencil
A large eight-legged spider crouches in full top-down view on this easy Halloween pumpkin stencil, its oval abdomen and round cephalothorax left as solid orange while all the space between the angled legs is pierced through. Eight legs radiate outward and slightly downward from the body, each tapering to a point. The gaps between legs are the cut areas, so work around the spider methodically to avoid accidentally snapping any single leg at its thinnest point near the body junction.
Crying Emoji Pumpkin Stencil
A round emoji pumpkin stencil depicting the loudly crying face: a circular head with a wrinkled brow, two oval eyes, a large open mouth turned sharply downward, and a dramatic flood of tears pouring from both eyes that bleeds into the surrounding circular border. The tear streams are wide and bold, merging with the outer ring cutout to form one large continuous opening at the bottom of the circle. The small raised brow wrinkle between the eyes is a thin floating island; anchor it with petroleum jelly on the inner wall before cutting the surrounding face away.
Curled Dolphin Profile
A leaping dolphin caught mid-arc, its curved body, pointed snout, dorsal fin, and sweeping tail all glowing through one sculpted cut-through opening, with an intact rind island shaping the pectoral fin and belly. The interior island is the key feature: cut the outer outline in sections and leave the connecting bridges to the island untouched until the very end, then trim them carefully to final width.
Curled-Hand Ghost & Round Glow
A wide-eyed little ghost with curled hands and a wavy hem floats in front of a big round glow, its startled O-shaped mouth mid-boo. The circular background is cut through around the ghost, so the figure stays as connected rind while light floods the disc behind it. Those slim connector bridges at the hands and hem are the whole design; cut the large background sections first and save every bridge for careful final passes.
Curved Ball and Two Stars
A giant tennis ball dominates the pumpkin, its two big panels pierced through and separated by the signature curved seam left as an attached band of shell, with a small star cut on either side. The sweeping seam is the make-or-break piece, so cut both panel edges toward the seam rather than across it and keep the band at least a finger wide for strength.
Curved Palm with Five Fronds
A tropical palm tree with a gently curved trunk and five broad fronds fanning from the crown, carved as one connected glowing silhouette. The whole tree is pierced through in a single piece, so the trunk and fronds shine together like an island sunset. This easy design has one caution: the frond tips are the thinnest cuts, so start at the trunk base and work upward, saving the delicate leaf points for your final, gentlest strokes.
Curved-Neck Dino and Left Tail
A gentle brachiosaurus in full-body silhouette, its long neck curving up to a small head while a thick tail sweeps out behind sturdy rounded legs. The whole dinosaur is cut through as one connected opening, so the friendly giant glows edge to edge. An easy favorite for dino-loving kids; start cutting at the wide belly and work outward so the slender neck is supported until the very end.
Cute Bat Pumpkin Stencil
A chubby cartoon bat with pointed ears, large round hollow eyes, a small open mouth with two fangs, and wide jagged wings spread in a V-shape makes up this friendly easy bat pumpkin stencil. The wings, eyes, and mouth are all pierced through, leaving the round body as a solid center island held by the wing-edge bridges. To keep the central body from drooping inward once the wings are cut, carve each wing in two halves and leave a thin skin tab at the wingtip notches until the very last cut.
Cute Cartoon Monster Pumpkin Stencil
A round, cartoonish little monster stands front-facing with two large curved horns at the top, wide oval eyes, small fangs, fuzzy legs, and stubby arms raised at its sides. Most of the body outline is pierced through, leaving the solid oval pupils and the narrow bridges between the arms and torso intact. Carve the large horn arcs first while the pumpkin wall has maximum strength, then work inward to the eyes and finally the jagged fur fringe around the legs.
Cute Horned Monster Pumpkin Stencil
A chubby, wide-eyed cartoon monster with curved horns, small bat-like wings spread to either side, a smiling mouth, and stubby feet sits inside a large circular opening on this easy pumpkin stencil. The circular background and small body details are pierced through, leaving the round monster figure itself as a solid silhouette at the center. Because the circular outer ring is cut away entirely, score and remove it in segments rather than one piece to keep control of the blade near the wing tips.
Cute Skull Pumpkin Stencil
A cute, stylized skull face looks straight out of this beginner pumpkin stencil, with two large round eye sockets and a small triangular nose cut through, all enclosed in a rounded skull outline broken into arc segments. The lower jaw shows four chunky teeth separated by gaps, and small curved cheekbone accents frame the face. Because the skull outline is split into separate arcs rather than one continuous ring, carve each arc segment individually so the gaps between them stay crisp.
Cute Starfish Pumpkin Stencil
A stylized starfish with five rounded arms and a cute cartoon face, including two large round eyes with small lashes, a button nose, and a gentle smile, sits symmetrically centered in this hard pumpkin stencil. The arm openings and facial features are cut through while the narrow bands between the arm segments stay solid, framing the starfish shape clearly when lit. The thin band between the two eye holes is the most vulnerable bridge; cut the right eye last so you can brace the section from both sides during that final cut.