Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
35 results · Page 1 of 1
Angular Mask and Eight Slits
This menacing bony mask glares through huge slanted eye sockets, flares a split skeletal nose, and bares a wall of long vertical teeth framed by curved fangs at each corner, with angular temple slashes radiating from the sides. The sockets, nostrils, tooth gaps, and slash marks are all cut through, leaving thin ribs of skin as the teeth. Hard-level advice: carve the eight narrow tooth slits with a fine blade and leave the outer fangs until the very end.
Bride of Frankenstein Pumpkin Stencil
This pumpkin stencil depicts the Bride of Frankenstein: a woman's face in three-quarter profile with her dramatically tall, wild hair rendered as a jagged silhouette swept around the head. The face remains solid orange pumpkin skin, with the surrounding hair and shadow cut away to reveal the profile through negative space. Because the wispy tendrils of hair are narrow and fragile, use a thin detail blade and cut those curling strands before tackling the large surrounding void so the stencil sheet still holds them in place.
Cracked Skull Pumpkin Stencil
A side-facing human skull, cracked and fragmented, makes up this dramatic pumpkin stencil. Jagged fracture lines split the cranium into separate floating pieces, a single large orbital socket sits center-left, a smaller eye socket appears at the right, and the jaw opens to reveal ragged broken teeth. The intact pumpkin skin forms the skull fragments themselves while the large skull cavity, orbital holes, and tooth gaps are cut away. Carve the thin fracture-line gaps between skull fragments carefully and early, then work outward to the large open skull interior.
Crouching Werewolf Pumpkin Stencil
A stocky werewolf crouches forward in an aggressive stance in this hard pumpkin stencil, with a spiky mane of fur bristling along its back, a snarling open-mouthed face showing sharp teeth, and thick clawed legs ready to spring. The design uses open cuts for the face interior and the gaps between the leg and body fur tufts, with solid pumpkin ridges defining each tuft shape when lit. Cut the teeth row inside the open mouth before removing the surrounding head-area cuts so the small tooth gaps remain stable.
Devil in Flames Pumpkin Stencil
A snarling devil or demon figure dissolves into horizontal flame streaks in this expert pumpkin stencil, the upper body and bared-teeth face rendered in dense interlocking cuts while dozens of thin parallel flame lines trail outward to the right, tapering to points. Lit from inside, the flames read as a cascading burst of light across the pumpkin surface. Cut the face details first, then work along the flame lines from the body toward the outermost tips, always cutting from the thick base of each flame toward its thin pointed end.
Double Wrinkles and Fang Grin
Deeply wrinkled brows curl over narrowed eyes with rooted pupil tabs, a flared nose snarls in the middle, and a wide fanged grin full of jagged teeth completes this genuinely sinister face, flanked by small diamond cutouts at each temple. Everything is pierced through, and the layered brow wrinkles are why it rates hard. Cut the thin wrinkle slits with a fine-detail saw before the larger eye and mouth openings weaken the surrounding wall.
Evil Clown Pumpkin Stencil
A sinister clown face with tall horn-like hair spikes, hollow cheekbone arches, a wide gaping smile showing separated teeth, and small spiral eye-corner details makes this hard evil clown pumpkin stencil immediately recognizable. The design is carved almost entirely as negative space, with the face, mouth, and eye areas all open and the narrow skin ridges of the hair spikes and cheek arches defining the character. The two tall hair spikes at the top are the thinnest connected elements, so cut them after all the large face openings are out to keep them from vibrating loose during the heavier cuts.
Flame Crown and Hooked Eyes
Hooked, furious eyes glare beneath a crown of flame-shaped cutouts that climb the pumpkin's forehead, while a jagged mouth bristles with rows of interlocking fangs and a diamond nose burns at the center. Nearly a hundred small pierced shapes surround the face, so this is a marathon of careful knife work. Cut from the center outward and rest often; the narrow skin bridges between flames and fangs cannot take rushed strokes.
Flaming Skull Profile Pumpkin Stencil
A skull in three-quarter profile sits at the center of this hard pumpkin stencil, ringed by a crown of wild flame tongues that curl and taper at their tips. The skull's round cranium, hollow eye socket, nasal cavity, and separated teeth are all open cut-outs, while the solid skin between them forms the facial structure; the flames surrounding it are a mix of pierced channels and solid skin bridges. Carve the skull's eye socket and nose first, then work the teeth individually before tackling the outer flame tongues, which have thin tapered ends that tear if the blade stalls.
Furious Eyes and Diamond Mask
A ferocious mask of a face with slanted furious eyes, a flared nose, and a jagged mouth full of interlocking fangs, all framed by dense rows of diamond and wedge cutouts that cover the cheeks and brow like scales. Every diamond, wedge, and fang is pierced through, turning the whole front into a lattice of fire. This expert pattern demands order: carve from the center outward so surrounding cuts never weaken your working area.
Ghost Mask Pumpkin Stencil
A ghost-faced horror-movie mask is the subject of this easy pumpkin stencil: an elongated oval skull shape with two large teardrop eye cutouts, a small oval nose hole, and a wide gaping mouth that tapers to a pointed chin. Flowing tendrils extend from the lower sides of the mask. The three facial openings glow as three distinct shapes, and the flowing lower extensions give the mask a draping, spectral quality when lit. Cut the narrow nose piece first since it sits between the two large eye openings and is the most vulnerable to tearing.
Grim Reaper with Raised Scythe Pumpkin Stencil
A shrouded Grim Reaper grips a scythe overhead in this expert-level pumpkin stencil, packed with dozens of jagged, flowing cut sections that render tattered robes, bony fingers, a skull face peering from the hood, and a second smaller skull on the chest. The design reads as a dense web of orange skin bridges surrounding numerous glowing cutouts. Tackle the smallest interior cuts around the skull face first so you have full stencil support, then work outward through the robe details toward the large robes and scythe blade.
Grim Reaper with Scythe Pumpkin Stencil
A hooded Grim Reaper leans forward gripping a large curved scythe, its skeletal face visible inside the cowl, and tattered robe edges dissolving into ragged fringe at the bottom in this expert grim reaper pumpkin stencil. The composition reads as a single dramatic figure, with the scythe blade sweeping up behind the figure and the robe tatters creating many thin separate cuts below. Carve the robe fringe tatters at the base first, since those narrow flame-like cuts are the easiest to crack once adjacent large sections of the torso are removed.
Hanging Eyes and Stitch Smile
Two enormous wide eyes with hanging pupils stare beneath crackling zigzag brows, while small skull nostrils sit above a long stitched grin that stretches nearly ear to ear. The eyes are cut through around the drooping pupil tabs, the nostrils are pierced, and the mouth is one thin line crossed by vertical stitch slits. Those dangling pupils and skinny stitches make this a hard carve; keep every stitch cut short and support the pupil tabs while you saw around them.
Happy Halloween Drip Text Pumpkin Stencil
The words HAPPY HALLOWEEN wrap across this pumpkin stencil in a wide dripping horror typeface, the tall letters of HALLOWEEN spanning the full width of the pumpkin in a single solid banner with icicle-like drips hanging from each base. The smaller word HAPPY sits above in a lighter display face. All letters are carved as open cut-outs connected edge to edge, forming a wide horizontal band of glowing text. Thin the pumpkin wall to about half an inch across the whole text zone before carving, because the long horizontal band removes a large section of structural support and a thinner wall is easier to keep from cracking under the blade.
Hooded Grim Reaper Face Pumpkin Stencil
A hooded Grim Reaper face looms from within a tattered, wind-swept cloak in this expert pumpkin stencil, its skull face showing deep-set eye sockets, a skeletal nose cavity, and rows of exposed teeth, all surrounded by jagged cloak edges that dissolve into flame-like wisps at the bottom. Dozens of small cuts through the cloak fabric, face, and shroud edges create a complex web of glowing gaps. Tackle the most crowded area, the teeth row, first when your hands and the pumpkin are both fresh, then spiral outward to the cloak wisps.
Horned Demon Face Pumpkin Stencil
A demon face stares out from this expert pumpkin stencil, its two curved ram-like horns sweeping upward and outward, wild hair radiating from the sides, a bearded chin, and glaring deeply set eyes framed by heavy brow lines. Wing-like shoulder shapes flare wide at either side. The dense interlocking cuts form dozens of small glowing slivers around the retained face features, which remain as solid orange skin. Carve the narrow hair fringe pieces on each side first to release the outer sections, then work inward toward the eyes and beard.
Leering Eyes and Crooked Nose
Slanted leering eyes with attached round pupils glare above a crooked off-center nose and a jagged sneer packed with pointed fangs, while scattered diamond scars glint across both cheeks. The eyes, nose, mouth, and diamonds are pierced with pupils and fang points left as shell. The hard part is the web of narrow fangs; cut each tooth gap from tip to base and never twist the blade mid-cut.
Long-Eared Monster Face
A tall, unsettling monster mask stares out of the pumpkin: long upright ears branching like antlers, hollow ringed eyes, a skeletal snout, and a mouthful of pointed fangs, all drawn in thin interlocking cutouts. The entire face is pierced through as a network of narrow slots that leaves delicate pumpkin bridges between every glowing line. This expert design demands a fine-detail saw; carve from the center outward so the fragile bridges keep support as long as possible.
Pointed-Abdomen Relief Spider
A boldly sculpted spider with a plump pointed abdomen, rounded head, and eight thick segmented legs that arch outward like a tarantula ready to strike. It carves as continuous-wall relief: you shave away skin at varying depths so the body and legs stand out dimensionally, with no openings pierced. This hard project rewards layered carving, so rough in the whole shape shallow first, then deepen around the legs to lift them off the background.
Rising Zombies Pumpkin Stencil
Two zombie figures rising from the ground face inward in this hard pumpkin stencil, their ragged arms reaching upward and their tattered lower bodies emerging from earth at the base of a tall oval negative space. The zombies read as solid orange silhouettes flanking a large central open oval, so the lit jack-o-lantern glows through that oval while the outstretched zombie arms and rotting fingers stand out in relief. Carve the finger details at the top of each arm before cutting the large central oval, as the fingers are the most fragile elements and benefit from the extra pumpkin mass still in place.
Round-Eyed Dripping Grin
A gleefully sinister face with huge round eyes topped by curling, hooked brows, a small skull-style nose, and an enormous crescent grin edged with thin dripping tooth spikes. Every element is cut through, and the narrow drip slits along the mouth are what earn the hard rating. Carve the big eye and mouth openings first, then cut the fragile tooth drips last with a fine saw so they do not snap.
Scary Text Pumpkin Stencil
The word "Scary" is rendered in a dripping, horror-movie hand lettering style and set inside a speech bubble outline made of jagged, claw-like strokes in this hard pumpkin stencil. The letter forms themselves are cut through while the speech bubble border stays solid, so candlelight glows through the word while the ragged bubble outline frames it in orange. The thin descenders on the letters, particularly the tail of the "y" and the base of the "S," are the most fragile bridges; cut those last after the letter interiors are already free.
Screaming Face Pumpkin Stencil
A screaming man's face, rendered with wild tufted hair radiating outward in jagged spikes, fills this expert-level pumpkin stencil. The wide open mouth, squinting brow, and deeply shadowed cheeks are built from interlocking curved cut-through shapes separated by thin orange bridges that define the facial planes. The radiating hair spikes are particularly slender at their tips. Work the hair tips first with a narrow blade, then carve the facial features from the forehead down, saving the large mouth cavity for last so it doesn't weaken the surrounding wall prematurely.
Skeletal Grim Reaper Pumpkin Stencil
A menacing skeletal Grim Reaper looms in three-quarter view on this expert pumpkin stencil, its ragged shroud trailing in torn tatters, one clawed bony hand gripping a scythe handle, a detailed skull face with visible teeth, sunken eye sockets, and a crescent scythe blade arcing across the upper left. Dozens of thin irregular shreds of robe create complex negative spaces throughout the body. Begin by cutting the large scythe blade and clearing the open background areas, then work into the tattered robe fringe from the outside edges inward so the narrow strips never lose support from adjacent uncut skin.
Slanted Eyes and Jagged Grin
A fierce horror face made of three bold shapes: two sharply slanted eyes that hook downward like angry slashes, and a wide zigzag mouth full of jagged points. Everything is cut through, so the whole face blazes with candlelight and reads clearly from the street. It is an easy carve despite the menacing look; use long straight cuts for each zigzag segment and the aggressive angles practically draw themselves.
Snarling Split-Mouth Face
This snarling jack-o'-lantern glares through slanted, angry eyes above a flared triangular nose and a huge split mouth bristling with long fangs and jagged lower teeth. The eyes, nose, and mouth are all cut through, while thin skin bridges hold each fang in place against the glow. Rated hard because of those narrow tooth bridges; carve the fangs last with a fine saw and leave extra width until the final pass.
Unequal Eyes and Jagged Grin
A nightmare grin stretches ear to ear, packed with dozens of jagged interlocking fangs, beneath two mismatched eyes, one wide and wild and one narrowed and crossed by scar lines, with flame like spikes radiating outward and diamond accents above and below. Nearly all of it is pierced through, leaving a web of thin rind spikes that demands real patience. Work from the center of the mouth outward with a fine saw, supporting each fragile spike as you free it on this expert carve.
Werewolf Full Body Pumpkin Stencil
An expert-level werewolf pumpkin stencil depicting a muscular beast mid-stride, head thrown back in a snarl, clawed hands reaching forward, and fur rendered in dozens of jagged radiating cuts around the shoulders, arms, and legs. The face detail is dense: open jaws with visible fangs, heavy brow, and scattered facial fur cuts create a fiercely layered silhouette. Because many fur elements are isolated islands, tape a backing sheet over the stencil after transfer so small pieces cannot drop inside the pumpkin until you are ready.
Werewolf Pumpkin Stencil
A snarling werewolf portrait fills this expert pumpkin stencil from collar to crown: matted fur radiates around the brow, small rounded ear nubs press against the sides of the skull, heavy brow ridges overhang narrow angular eye slits, and bared fangs show at the lower lip. The face is built from many floating islands of pumpkin skin held together by thin bridges, so lit from within every feature reads in warm orange relief against the glowing gaps. Work from the smallest detail shapes outward, leaving the large forehead and cheek sections until last so the bridges keep all floating pieces locked in place.
Zombie Figure Pumpkin Stencil
A gaunt zombie figure lurches upright in this jack-o-lantern pumpkin stencil, its hollow skull face and long clawed fingers pierced through while ragged, tattered robes form the solid silhouette below. Scattered debris fragments float around the body as isolated cut-out shapes, creating an eerie sense of motion when lit. Carve the small floating fragments last, using a narrow detail blade to keep each piece from cracking away from the main composition.
Zombie Hands Pumpkin Stencil
Two zombie arms thrust upward side by side on this zombie pumpkin stencil, each one emerging from a ragged torn sleeve at the base, with elongated bony fingers splayed wide and dripping flesh hanging from the wrists. The arms are the solid orange wall while the space around them is pierced away, so the pair of grasping hands glows against a dark background. The skinny finger tips are the most vulnerable pieces, so keep a finger pressed gently on each tip from the outside as you cut around it to prevent the thin point from breaking off.
Zombie with Chainsaw Pumpkin Stencil
A ragged zombie grips a chain-saw overhead while bursting through a set of vertical window bars on this expert zombie pumpkin stencil, its tattered body and grimacing face rendered in a detailed silhouette-plus-bridge style. The three vertical bar strips are the primary structural elements holding the upper and lower halves of the design together; do not cut them. Work from the outer edges of the figure inward, and carve the zombie's small face detail islands before removing the large surrounding body void.
Zombie with Skull Pumpkin Stencil
A tall zombie figure stands upright inside a large oval frame in this expert-level pumpkin stencil, one arm raised and holding a dripping severed skull. The body is rendered as a jagged silhouette of tattered flesh and clawed feet set against the solid oval background, while the skull dangling from the raised hand adds a second, smaller focal point within the composition. Because the zombie's body is a narrow silhouette surrounded by the large pierced oval, cut the oval background first and leave the figure's connection points at the base until last to keep the thin leg and claw details from breaking free prematurely.
Zombies Pumpkin Stencil
The word "ZOMBIES" in dripping, horror-font letters anchors this stencil, with a row of grasping undead arms and hands rising above the text from a pool of slime below. All the negative space around the letters and arms is cut away, leaving the drip shapes and reaching fingers glowing against the pumpkin flesh. The thin drip strands between letters are the most fragile part of this carving, so cut each letter interior first and leave the connecting drips until the very end.