Hard Chica FNAF Pumpkin Carving with Cupcake Accent

From pumpkin to porch

1. 1

   Hollow the pumpkin

   Cut the back lid and scoop to one inch of wall thickness. Chica's layout includes a cupcake element in the lower frame, so choose a pumpkin with enough vertical height. Dry the interior completely. Thick walls help the shallow bib and tuft recesses stay structural through the display period.

2. 2

   Transfer the full template

   Print the template with Chica's face centered in the upper portion and the cupcake positioned in the lower area. Transfer all lines carefully, including the beak perimeter, tooth root lines, tuft outline, bib shape, cupcake body, and the tiny cupcake eye positions. Mark cupcake eye centers with a small punch dot so they are easy to find later.

3. 3

   Cut the main eye and beak openings

   Cut the two hollow eyes first, then the open beak opening. Leave the upper beak edge broad and intact as a structural support. For the lower rooted teeth, score each root line before cutting the beak gap below them. Remove the beak piece carefully to protect the tooth bases.

4. 4

   Shallow-back the face, tuft, bib, and cupcake body

   Use a linoleum gouge to back-carve the face contour, tuft at the top of the head, bib area, and the cupcake body to roughly half wall depth. Keep the cupcake body uniform in depth to create an even glow when lit. Work from the main face outward, using a flashlight check after each section.

5. 5

   Cut the cupcake eye apertures

   The tiny cupcake eyes are the most delicate step. Use a fine detail knife or a small drill bit to create the small eye holes in the cupcake body. Score the outline first, then remove the interior in small pieces. Keep these holes small and clean so they pulse distinctly when a flickering LED is inside.

6. 6

   Light and display

   Place a flickering LED puck inside so the cupcake eyes pulse with the light variation. Set the pumpkin at a low height where viewers can see the cupcake element clearly. The combination of full eye and beak light with the soft bib glow and the tiny pulsing cupcake eyes makes this one of the more unsettling FNAF displays.

Written with AI to match this design