Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
1155 results · Page 19 of 33
One-Eyed Monster Pumpkin Stencil
A round one-eyed cartoon monster fills this funny pumpkin stencil, its single large circular eye containing a crescent pupil, a wide toothy grin below, and four spindly stick arms raised overhead, each ending in a three-fingered hand. The monster's body ring and arms are left as pumpkin skin, while the eye surround, mouth opening, and spaces between the fingers are cut through, glowing when lit. Carve the tiny gaps between the finger stubs before tackling the eye ring, since those narrow channels are easiest to control before the surrounding wall is weakened.
One-Eyed Worm Monster Pumpkin Stencil
A quirky one-eyed worm-like creature stands upright in this animals pumpkin stencil: a large circular head with a concentric inner eye ring and a crescent pupil, small antenna nubs around the head rim, a fanged grinning mouth, two tiny three-fingered arms raised at its sides, a long segmented body with ringed markings, and curling feet at the base. The thin connecting lines between head, body, and limb segments are the most fragile parts of this carving. Cut the small finger and toe tips before the body-segment cuts so the creature's extremities have maximum wall support.
Open Rose Bloom Pumpkin Stencil
A fully open rose bloom fills this pumpkin stencil edge to edge, with layered outer petals that taper to pointed tips and a tight spiral center bud defined by two curved cut lines. Most of the design is cut away, leaving the petal-edge outlines and spiral as thin orange pumpkin bridges floating in a large illuminated background. The center spiral is the most fragile element, so trace its two curved cuts first with a sharp fine blade before opening the surrounding petal fields that would otherwise leave it unsupported.
Open-Jawed T-Rex
An open-jawed T-Rex strides across the pumpkin in full profile, tiny arms forward and thick tail sweeping behind. The entire dinosaur is a shaded silhouette: shave away the skin inside the body so the shape shows as a lighter panel against the orange rind, with no pierced holes. At medium difficulty, outline the jaws, claws, and tail tip carefully first, since those narrow points define the whole silhouette when the sun or candle hits it.
Opossum Pumpkin Stencil
A cartoon opossum crouches in profile across this hard-difficulty pumpkin stencil, its oversized round eyes and small pupils peering out, tall rounded ears pricked up, a plump body with scruffy fur texture, and tiny clawed feet extending below. The large dark body mass is carved away while the ring-shaped eye outlines and a few scattered fur marks stay solid, creating a bold silhouette that reads well even without a light source. Cut the circular eye rings before removing any surrounding flesh so they keep their structural support.
Oregon Pumpkin Stencil
Oregon's outline appears as a chunky roughly rectangular shape with a short notch in the upper-left corner where the Columbia River forms the Washington border, a gently curved coastal edge on the left, and a mostly straight southern border in this easy state pumpkin stencil. The entire interior is cut away as a single open shape so the Beaver State silhouette glows from within. The short upward notch at the upper-left corner is the most distinctive detail, so cut that notch carefully before tracing the longer straight edges so you do not accidentally round it off.
Oregon State Shape
Oregon's broad, boxy outline carved as one glowing window, with the Columbia River notch along the top and the gentle Pacific curve on the left. The full state shape is cut through so the candle lights it edge to edge, framed by solid rind. A friendly medium carve since most borders are long and straight; steady the blade through the northern river squiggle and the rest goes quickly.
Ornate Sugar Skull Pumpkin Stencil
This sugar-skull pumpkin stencil features a circular skull face filled with symmetrical Dia de los Muertos ornamentation: two large almond-shaped eye sockets, a central floral cross motif above them, scrollwork tendrils curling outward on both cheeks, and a rectangular tooth-grid at the chin. The design carves as a mix of open negative spaces and solid orange bridges that define each decorative element. Cut the cheek scrollwork before removing the large eye sockets, since the thin curling lines are easier to control while the surrounding wall is still solid.
Ostrich & Feathered Rump
A full-body ostrich stands in profile, with its long curved neck, round feathered body, and two lanky legs shaved into the pumpkin skin. Nothing is pierced; you peel away the skin inside the bird so the pale flesh forms a two-tone silhouette against the orange shell. Use a loop tool or vegetable peeler and shave in shallow passes so the thin neck and legs stay even in width.
Oval Eyes and Crescent Cheeks
This delighted face beams with two big oval eyes, a small triangle nose, crescent-shaped cheek accents, and an open grin showing a pair of stubby teeth, all dusted with tiny freckle holes. Every shape is pierced through, with the teeth left attached to the upper lip. Cut the delicate crescent cheeks with the tip of your saw only, since their thin curves are the easiest pieces to crack.
Oval Eyes and Eight Cheek Dots
Big oval eyes sit under arched brows above a round button nose and a broad smile showing four blunt square teeth, with four freckle dots sprinkled on each cheek. The eyes, brows, nose, mouth, and dots are pierced through while the tooth bridges stay connected. Poke the eight small cheek dots first, then cut the large features, leaving the tooth bars until the end so they keep support.
Oval Eyes and Round Cheeks
Two big oval eyes glow above a tiny curved smile, with a small round blush circle on each cheek that lights up like a bashful glow. All five features are pierced through, and the shapes are large and simple, making this one of the sweetest easy carves for kids to help with. Cut the little smile last with a fine blade, since that short curve is the only delicate stroke in the whole design.
Oval-Eyed Cat With Two Curls
A friendly cat face built from simple shapes: two pointed ears with inner triangles, big oval eyes, a tiny triangle nose, a curled smile, and three long whiskers sweeping out from each cheek. Every element is cut through, so the whole face lights up at once. The whiskers are just narrow slits, which is why kids can manage this one; poke each slit through with the tip of the saw and lengthen it slowly.
Owl on Moon Pumpkin Stencil
A compact owl perches on a branch inside a full-circle moon background in this hard-level animal pumpkin stencil, the bird shown front-facing with heavy-lidded crescent eyes, a small triangular beak, three rows of curved feather-scale cuts on the belly, and stubby feet gripping the branch below. The circular moon background is cut away all around the owl, leaving the bird as a solid silhouette connected to the outer ring at the branch base, so the owl glows in outline against the bright moon when lit. Cut the circle background in sections while preserving the narrow branch connection at the bottom, which is the only structural link between the owl and the outer ring.
Palm Trees Pumpkin Stencil
Two palm trees of different heights rise from a shared sandy island base in this pumpkin stencil, the taller centered tree and a shorter leaning tree to the left each sporting fronds with individual leaflet-cut fingers spreading wide at the top. The negative space around the trunks and through the frond fingers is cut away, leaving the trunk outlines and leaflet ribs as solid orange bridges so the whole composition glows as a backlit tropical scene. Cut the individual frond leaflet gaps before removing the larger surrounding background so the frond tips never lose support from the pumpkin skin beneath them.
Parasaurolophus Pumpkin Stencil
A cute bipedal Parasaurolophus dinosaur faces right in this hard-level pumpkin stencil, with the signature backward-sweeping cranial crest arching above its round eye, a chunky body sectioned by organic blob-shaped cut-outs along the dorsal ridge and belly, two short front arms with clawed fingers, and sturdy hind legs. The blob-shaped body cut-outs stay open so the dinosaur glows in a spotted pattern when lit, while the outer silhouette stays solid. Cut the small claw details on the fingers before removing the large body sections so the arm area keeps its rigidity while you work.
Paw Print and Bone Pumpkin Stencil
A dog paw print stacked above a classic dog bone forms this two-element dog pumpkin stencil, with the paw showing one main pad and four oval toe pads, and the horizontal bone below featuring two knobbed ends and a straight shaft. Both shapes are carved as separate open silhouettes that glow on the finished jack-o-lantern, the paw sitting centered above the bone with a clear gap of skin between them. Cut the paw toe pads and main pad first, then carve the bone, so any flexing of the pumpkin wall during the lower cut does not disturb the already-removed paw above.
Paw Print Pumpkin Stencil
A large paw print with one big central pad and four oval toe pads fills the face of this pumpkin stencil, each pad carved as a separate pierced cutout surrounded by solid orange wall. Lit from inside, the glowing ovals float against the dark background and read instantly as a cat or dog track. Cut the four smaller toe pads first while the central pad wall is still fully intact to keep the surrounding skin from flexing and cracking during the trickier large cut.
Peace Sign Hand Pumpkin Stencil
A hand making the two-finger peace or victory sign fills this easy emoji pumpkin stencil: two extended fingers spread in a V at the top, a curled fist below them, a small rounded thumb stub at the left, and a rectangular cuff at the wrist base. The spaces around and between the fingers are cut away so the glowing pumpkin shows the hand shape in solid orange with open surrounds. The narrow V-gap between the two raised fingers is the tightest space, so cut that slot in one continuous downward stroke before widening the surrounding areas.
Peace Sign Pumpkin Stencil
A large peace sign fills the pumpkin face in this easy pumpkin stencil: a bold outer ring interrupted by four gaps, a vertical center bar, and two diagonal lower bars all pierced through, with the spaces between them staying solid. When lit, the candlelight glows through the ring segments and the three bar slots, mapping the familiar peace symbol in orange light. Because the ring has four gaps that nearly isolate four arc sections, cut the two lower arcs last to keep them braced while the upper cuts are made.
Peaked Eyes and Offset Teeth
A timeless porch jack-o'-lantern with peaked half-round eyes, a triangle nose, and a broad smile broken by offset square teeth on the top and bottom lip. Every element is a full cut-through, so it lights up brilliantly at dusk. Cut the mouth last and remove it in tooth-sized sections; sawing the whole smile as one piece puts stress on the little tooth tabs.
Pennsylvania Pumpkin Stencil
The outline of Pennsylvania fills this pumpkin stencil as a single large cut-out: the roughly rectangular shape with its notched southwestern corner and jagged northern border traces the Keystone State's recognizable silhouette. Because the entire interior is pierced through as one piece, the jack-o-lantern glows as a bold, dark window of light. Score the long straight bottom edge first to anchor your line before navigating the irregular border.
Pennsylvania State Shape
Pennsylvania's blocky silhouette stretches wide across the pumpkin, straight along the top and bottom with the jagged Delaware River border zigzagging down the eastern side. The whole state is a single pierced opening that glows as one solid panel. Take the ragged eastern edge slowly with a fine saw, backing the blade out at each angle change so the small points do not snap off.
Perched Raven Pumpkin Stencil
A perched raven faces slightly upward in this full-body pumpkin stencil, with ruffled neck feathers rendered as jagged white-space cuts, a round dot eye, a short hooked beak, and scaled talons gripping a branch stub at the base. The bird's silhouette stays as solid pumpkin skin while the internal feather texture and eye dot are pierced through, creating a layered glow effect where the cuts read as bright highlights within the dark bird shape. Carve the tiny eye dot and the individual feather slashes before removing the larger body background to keep the piece stable.
Petal Border and Button Nose
A whimsical folk-art face with pupil-in-eye ovals, arched lash brows, a button nose, and a scalloped grin full of rounded teeth, all surrounded by a lush border of petals, leaves, and teardrops. Dozens of small openings cut through, which is what earns the expert rating despite the friendly look. Work from the center of the face outward to the border so early cuts never weaken the wall around later ones.
Pharaoh Death Mask Pumpkin Stencil
An Egyptian pharaoh death mask stares straight out of this expert pumpkin stencil, showing the broad striped nemes headdress with its pleated side panels and forehead uraeus cobra, plus a detailed face with almond-shaped eyes, straight brows, a defined nose, and a zigzag collar at the neck. The face details are held in thin skin bridges while the headdress stripes and surrounding areas are pierced through. Carve the delicate uraeus cobra at the top first since it is the most isolated element and easiest to cut without torque on neighboring sections.
Pi 3.14 Pumpkin Stencil
The numerals 3.14, rendered in a bold block typeface, fill this pumpkin stencil from edge to edge, referencing the mathematical constant pi. Each digit is a large, solid cut-out shape: the curved halves of the 3, the rectangular decimal point, and the straight-sided 1 and 4 are all pierced through and blaze with candlelight. Because the counter (enclosed area) of the 3 must be retained as separate floating islands of skin, tape small pieces of orange peel back in place after cutting to hold them, or plan to let them fall free for a fully open look.
Pi Symbol Pumpkin Stencil
A large, calligraphic pi symbol dominates this pumpkin stencil, with a long sweeping horizontal crossbar that curls upward at both ends and two tall descending legs that curve outward at the bottom. The single solid shape is cut entirely out of the pumpkin face as one connected piece, leaving a bold glowing symbol framed by solid orange. The long thin crossbar is the most vulnerable element: cut both legs first to release tension before slicing along the bar from each end toward the center.
Pineapple with Layered Crown
A plump pineapple with a full crown of layered, curling leaves and a body covered in the fruit's signature diamond lattice texture. It carves as continuous-wall relief: the fruit is shaved into the skin at different depths so the crosshatched skin and overlapping leaves stand out dimensionally, with nothing cut through. This hard design goes smoothest if you carve the diamond grid with two sets of parallel angled grooves before shaping each leaf individually.
Pineapple with Split Crown
A plump pineapple with a dramatic split crown of long, splayed leaves and a body filled with a deep diamond crosshatch pattern. The whole design is skin-shave work: leaves and body are peeled to bright flesh while crosshatch grooves are cut deeper for a woven texture. Score the diamond grid lightly with a ruler-guided knife before carving so the lattice stays even across the pumpkin's curve.
Pirate Pumpkin Stencil
A grinning pirate face topped by a tricorn hat is the subject of this hard pumpkin stencil: a skull-and-crossbones badge on the hat brim, a round-brimmed hat spreading wide, a leather eye patch over one eye, a weathered face with deep laugh lines, a broad toothy smile, and a pointed goatee at the chin. The lit design reveals a cheerful swashbuckler portrait full of character. Cut the small skull-and-crossbones elements on the hat first while the surrounding skin is firm, then work down through the face, saving the wide hat brim last.
Pirate Ship Pumpkin Stencil
A pirate ship viewed broadside fills this expert pirate pumpkin stencil, with a large sail bearing a skull-and-crossbones cutout, a cartoonish pirate figure standing at the bow with a sword, a cannon on the stern deck, and decorative hull porthole hooks below. The design has many small isolated cut pieces, including the skull's eye sockets and crossbones, the cannon barrel, and the pirate's facial features. Carve the skull-and-crossbones details on the sail first, since they sit within a large solid background that holds them firmly while you work the tiny pieces.
Pirate Skull Pumpkin Stencil
A grinning pirate skull wearing a broad tricorn hat dominates this expert-level pumpkin stencil, with a second miniature skull-and-crossbones badge emblazoned on the hat brim. Dense cutwork in the teeth row, eye sockets, and hat badge creates many small isolated pieces held together by narrow bridges of pumpkin flesh. Begin with the tiny crossbone details on the hat badge while your hands are freshest, then move to the eye sockets and finally the toothed lower jaw.
Pirate Skull with Parrot Pumpkin Stencil
A weathered pirate skull in a battered tricorn hat stares out from this expert pumpkin stencil, a parrot perched on the skull's head and tattered coat lapels framing its hollow cheeks. The skull-and-crossbones badge on the hat, individual finger bones along the bottom, and ragged coat edges create dozens of intricate cut sections. Carve the small hat badge first, then the interior face hollows, before moving outward to the flowing coat edges where the thinnest bridges live.
Plain Cross with Nine Rays
A plain cross stands at the center while nine tapered rays of light fan outward around it, like a sunburst breaking through. This shaded design is carved on a continuous wall, shaving the skin away so the cross and rays glow warmly with no pierced openings, which suits a reverent, softer look. Shave the cross to an even depth first, then taper each ray shallower toward its tip so the light appears to fade outward.
Plain Fire Helmet Silhouette
A traditional firefighter helmet in bold silhouette, showing the raised front shield, domed crown, and long swooping rear brim that flares out to protect the neck. The entire helmet is cut through as one large opening, so it glows as a single unmistakable emblem. This easy tribute carve works great on a big pumpkin; cut the long brim curve in one slow continuous pass to keep its sweep smooth.