Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
366 results · Page 3 of 11
Detailed Snarling Rat Pumpkin Stencil
A detailed rat rearing up on its hind legs fills this hard pumpkin stencil, posed with clawed front paws raised, mouth open in a snarl, and a long curling tail sweeping around the lower body. Unlike the simpler silhouette rat in this collection, this design uses internal cut lines to carve fur texture, claw separations, and an open mouth, leaving thin pumpkin ridges that define the anatomy when lit. Cut the individual claw slots in the front paws first so those delicate tips are still surrounded by solid pumpkin.
Devil with Trident Pumpkin Stencil
A cartoon devil character stands full-body, holding a trident in one hand and sporting a curled pointed tail behind it, with two horns curving above its round head, arched eyebrows, stubby fang teeth, and small cloven-hoof feet visible below its tunic. The scattered cut pieces, including the trident tines, horns, and eyebrow slots, are separated by solid pumpkin bridges that outline each body part clearly when the jack-o-lantern is lit. Cut the three narrow trident tines first since they sit away from the body and are easiest to control while the surrounding pumpkin is still rigid.
Diagonal Football & Five Laces
A football tilts diagonally across the whole face of the pumpkin, its two end panels and center field pierced through while a thin seam line and five lace bars stay attached as shell. Those slender laces are what push this into hard territory, so cut away from each lace bar rather than toward it and leave the bars for last. The glow through the big panels makes the dark laces pop.
Diamond Nose and Three Teeth
This is the timeless jack-o'-lantern: two triangle eyes, a diamond nose, and a wide crescent grin interrupted by three blocky square teeth, one hanging from the top lip and two rising from the bottom. Everything except the teeth is cut through, with the teeth left as standing tabs of shell. It is an easy, forgiving first carve; cut toward each tooth from both sides rather than sawing across it, so the tabs never take sideways pressure.
Dice and a Toppled Pawn
A dice cup tips over spilling three pip-marked dice across the scene while a toppled game pawn lies nearby in a glowing puddle of lantern light. This shading design is carved entirely by shaving the skin: the cup, dice faces, pawn, and spill area are scraped to different depths while the pip dots stay dark as untouched rind. Rated hard, keep each die's edges square with straight guide cuts before shaving so the cubes stay convincing.
Die and Pawn on Curved Board
A six-sided die and a classic rounded game pawn sit side by side on a curved, segmented game board path. The die faces, pawn silhouette, and board track are shave-carved so they glow in warm relief, with the pips scooped deeper for contrast; nothing pierces the wall. Shade the two big shapes first, then dot in the pips with a small round gouge, keeping each one the same depth so the die reads evenly.
Dog Paw Print Pumpkin Stencil
Another large dog paw print with one wide main pad and four rounded toe pads arranged above it makes up this easy dog pumpkin stencil, very similar in composition to other paw designs but with slightly wider spacing between the pads and a broader main pad shape. All five elements are cut through as open shapes that glow when lit, the gaps between them forming the defining lines of the print. Carve the two center toe pads first rather than starting at the edges, since the inner cuts require more maneuvering room before the outer pieces are removed.
Dollar Sign Pumpkin Stencil
A bold dollar-sign symbol fills the center of this pumpkin stencil, its curved S-shape and two vertical bar segments carved through entirely so candlelight blazes through the open silhouette. The thick outer outline stays solid, holding the shape firmly on the pumpkin wall. Because the two short horizontal bars at top and bottom are separate cut-outs, cut those small pieces first before tackling the large curved body so the surrounding wall stays supported throughout.
Dolphin above Curling Waves
A dolphin arcs above curling surf, its body, fins, and the rolling wave scrolls all shaved into the pumpkin skin with no pierced holes. Deeper shaving on the belly and wave crests makes those areas glow brightest, while shallow passes keep the outlines crisp. Vary your depth deliberately: the contrast between bright and dim is what gives this relief scene its sense of motion.
Domed Jellyfish and Bubbles
A ribbed jellyfish bell hovers near the top of the pumpkin, trailing eight long wavy tentacles that flow all the way to the base, with small bubbles rising on either side. The bell segments and tentacles are shaved to glowing flesh while thin strips of dark skin separate every ribbon, and the bubbles are pierced through. This expert shading design demands a steady hand; work each tentacle top to bottom in one continuous peel so the curves stay smooth and evenly lit.
Double Bars and Zigzag Teeth
An elaborate jack-o'-lantern face built from layered geometry: triangle eyes barred with double rind strips, arched claw-like brows, diamond accents down the cheeks, and a wide zigzag mouth of interlocking teeth flanked by curling flame flourishes. The many openings are cut through around a lattice of thin surviving rind. This expert design demands a sharp fine-tooth saw and a plan: cut from the center outward, finishing the outer flourishes last while the wall is still strong.
Double Wrinkles and Fang Grin
Deeply wrinkled brows curl over narrowed eyes with rooted pupil tabs, a flared nose snarls in the middle, and a wide fanged grin full of jagged teeth completes this genuinely sinister face, flanked by small diamond cutouts at each temple. Everything is pierced through, and the layered brow wrinkles are why it rates hard. Cut the thin wrinkle slits with a fine-detail saw before the larger eye and mouth openings weaken the surrounding wall.
Dragonfly with Reeds
A dragonfly hovers with all four veined wings spread wide, its long segmented tail trailing down among slender reed grasses and cattails. The whole scene is shave-carved: wings, body, and reeds glow through thinned skin while the background stays dark, with no pierced holes. The wing veining is the payoff detail, so shave each wing smooth first, then score the vein lines lightly with a knife tip rather than gouging them.
E=MC2 Pumpkin Stencil
Einstein's famous equation is carved as bold block letters spelling E = MC2 across this easy pumpkin stencil, with the superscript "2" rendered in smaller fragments to the upper right of the C. Each letter is a chunky stencil-style cutout with internal bridges holding counter shapes such as the horizontal bars inside the E. The superscript "2" has two small separate island pieces; cut the main letters first and save those two small fragments for last so they don't shift before the surrounding skin is stable.
Eight Curved Basketball Wedges
Eight curved wedge openings radiate from the center of the pumpkin, separated by ribs of shell that mimic the seams of a basketball. The wedges are all cut through, so the pumpkin itself becomes a glowing ball when lit. Keep the seam ribs a consistent width as you saw each wedge, and remove the wedge pieces gently by pushing from inside so the long curved ribs are not stressed.
Eight-Legged Peeled Spider
A giant spider sprawled across the whole pumpkin face, its oval abdomen and small head flanked by eight long jointed legs that bend at sharp knees. The design uses skin-shave shading only: the spider shape is peeled to the pale flesh while the wall stays whole, so it looms in daylight without any pierced holes. At medium difficulty, score the leg outlines first and peel each segment separately to keep the joints sharp.
Eight-Panel Basketball
A big glowing basketball built from one large circle divided by the ball's signature curved seam lines. The eight panel sections are pierced through while the seam lines stay as intact pumpkin ribs, so the whole ball reads instantly once a candle goes in. The medium challenge is keeping those curved ribs even, so cut alternating panels rather than working around the circle in order, which keeps the wall supported as you go.
Eight-Point Star and Diamonds
A large eight point star anchors the center while small diamonds and dots scatter around it like a burst of night sky sparkle. Every shape is a clean cut-through opening, so the pumpkin throws star shaped light across nearby walls and steps. Cut the big star's inner corners with a fine blade and pop the little diamonds out gently to keep their sharp points intact on this medium pattern.
Elk Head Pumpkin Stencil
A majestic elk head in silhouette, with a full rack of branching antlers spreading wide above a solid face, ears, and ruffled neck fur, forms this hard-difficulty pumpkin stencil. The entire silhouette is one connected cut-away area, making the antler tines the most delicate element: each branch tapers to a fine point at its tip. Cut the main skull and neck outline first to establish the shape, then work from the antler base toward each tine tip to avoid vibrating the narrowest points before the rest is secure.
Etched Tree with Three Gifts
A fully decorated Christmas tree rises from a cluster of wrapped presents, complete with beaded garland swags, patterned ornaments, and a star on top. The entire scene is skin-shave shading with no pierced openings; the tree and gifts are peeled pale while the garland beads and ornament patterns stay dark and raised. Shave the broad tree tiers first, then switch to a fine tool for the garland dots and bows.
Evil Clown Pumpkin Stencil
A sinister clown face with tall horn-like hair spikes, hollow cheekbone arches, a wide gaping smile showing separated teeth, and small spiral eye-corner details makes this hard evil clown pumpkin stencil immediately recognizable. The design is carved almost entirely as negative space, with the face, mouth, and eye areas all open and the narrow skin ridges of the hair spikes and cheek arches defining the character. The two tall hair spikes at the top are the thinnest connected elements, so cut them after all the large face openings are out to keep them from vibrating loose during the heavier cuts.
Evil Rabbit Skull Pumpkin Stencil
A sinister rabbit skull stares from this hard-level pumpkin stencil: the elongated ears flow upward into wild flame-like wisps, and the face is a mask of interlocking oval and rectangular cutouts forming the eye sockets, snout bridge, and a row of small rounded teeth at the bottom. The entire composition is tightly packed with narrow white-line channels separating each island, so the lit jack-o-lantern glows with an intricate dark-rabbit visage. Begin by cutting the row of small round teeth at the base before moving up to the larger eye and snout openings, as the teeth are the most isolated and easiest to free without disturbing surrounding bridges.
Fanged Evil Clown Pumpkin Stencil
Jagged wing-like eyes arch above a massive serrated grin packed with long, irregular fangs on this evil clown jack-o-lantern pumpkin stencil. Both eye pieces and the mouth arc are fully cut through, leaving a small heart-shaped nose sliver as the only solid detail inside the grin. The thin points of each fang are the most fragile elements: carve the broad base of the mouth opening first, then carefully nibble out each fang tip from base to point to avoid snapping them off.
Fire Helmet Above Three Flames
A classic firefighter helmet, complete with front shield and wide brim, glows above three dancing flames in this tribute design. The helmet crown, brim, and each flame are separate cut-through openings, with skin bridges keeping the helmet's shield outline dark against the light. At medium difficulty, the flame tips are the fussy part; saw each flame from its wide base up toward the point, and cut the helmet's thin brim opening last when you can support the wall from inside.
Fishbone Skeleton
A cartoon fish skeleton stretches across the pumpkin, complete with an open-mouthed head, a round eye, a long spine lined with curved rib bones, and a fanned tail. The whole design is skin-shaved rather than pierced, so the pale bones glow softly against the dark rind like an x-ray. For this medium etch, outline the spine first, then shave each rib in one smooth stroke so the curves stay parallel and evenly spaced.
Five Glowing Soccer Panels
A full soccer ball fills the pumpkin's face, with a dark pentagon at its center surrounded by glowing hexagonal panels and a bright outer ring. The panels are shaved down to the flesh rather than pierced, so the seam lines and center pentagon stay as raised skin while the shaved sections glow softly. For this medium shading design, score every seam line first, then peel each panel with a flat gouge, keeping depth even so all the panels light up uniformly.
Five Stars Around a Crescent
A crescent moon anchors one side while five stars and a scattering of small round dot holes twinkle across the rest of the pumpkin like a busy night sky. Every element is cut through, and the pattern wraps wide, which suits a bumpy or warty pumpkin beautifully. The medium rating comes from the sheer count of pieces, so drill or punch the little dots first as reference points, then carve the stars and finish with the big crescent.
Flame Crown and Hooked Eyes
Hooked, furious eyes glare beneath a crown of flame-shaped cutouts that climb the pumpkin's forehead, while a jagged mouth bristles with rows of interlocking fangs and a diamond nose burns at the center. Nearly a hundred small pierced shapes surround the face, so this is a marathon of careful knife work. Cut from the center outward and rest often; the narrow skin bridges between flames and fangs cannot take rushed strokes.
Flame Werewolf Pumpkin Stencil
A werewolf head in profile faces right, built entirely from flame-shaped strokes and pointed fur tufts that radiate outward from a snarling snout and bared teeth, creating a tribal-tattoo effect across the whole pumpkin face. The design has no large open areas; instead dozens of narrow flame cuts pierce through, leaving thin pumpkin bridges between each cut that glow orange and separate clearly from the negative space. Cut the smallest innermost flame tips around the snout first, then spiral outward to the largest wing-like strokes at the edges.
Flaming Skull Profile Pumpkin Stencil
A skull in three-quarter profile sits at the center of this hard pumpkin stencil, ringed by a crown of wild flame tongues that curl and taper at their tips. The skull's round cranium, hollow eye socket, nasal cavity, and separated teeth are all open cut-outs, while the solid skin between them forms the facial structure; the flames surrounding it are a mix of pierced channels and solid skin bridges. Carve the skull's eye socket and nose first, then work the teeth individually before tackling the outer flame tongues, which have thin tapered ends that tear if the blade stalls.
Flexed Bicep Emoji Pumpkin Stencil
A muscular arm bent at the elbow in the classic flexed-bicep emoji pose fills this easy emoji pumpkin stencil, with the large upper arm and forearm cut away as open voids and the thin wrist and elbow-crease lines left as pumpkin-skin bridges. The two sections of the arm void are separated by the elbow-crease bridge, which is the slimmest part of the design. Carve the forearm section below the crease first, then remove the upper arm, so the crease bridge is never cut from two sides at once.
Floppy-Eared Labrador Muzzle
A lovable Labrador face with two glowing floppy ears, round eyes, a rounded triangle nose, and an open smiling muzzle beneath. The big ear panels and the mouth cut fully through, while narrow skin bridges separate the nose from the jowl lines. A medium carve thanks to those bridges; cut the small eye and nose openings before the large ears so the face area keeps its strength while you work.
Florida Heart Lettering
A bold I sits beside a big full heart, with the letters F and L stacked underneath, spelling out Florida love in thick serif type. The heart and all three letters are cut completely through for a bright, readable message after dark. This easy carve suits first-time letter cutters; keep the serifs slightly chunky rather than trimming them thin, and cut the heart's inner notch before removing the rest of the shape.
Florida Pumpkin Stencil
The outline of the state of Florida is cut as a single solid silhouette on this states pumpkin stencil: the long panhandle extends left, and the distinctive peninsula curves south and ends in a ragged coastline. The entire shape is one continuous void with no internal bridges, making it a fully open lantern window. The tricky part is the complex Atlantic coastline on the right side, where small inlets create many convex curves in quick succession: slow down on those curves and let the blade pivot rather than forcing a turn.
Flying Bats Pumpkin Stencil
Five bats in mid-flight are scattered across the pumpkin face in this hard pumpkin stencil, ranging from a large swooping bat in the upper left down to a small one at the lower right, each drawn with jagged, pointed wing edges and tiny body details. All five bats are cut through as separate open shapes, so candlelight spills through each one individually and the pumpkin reads as a night sky full of swooping shadows. Cut the smallest bottom-right bat first while the pumpkin surface is fully rigid, then work upward to the largest.
Flying Saucer Pumpkin Stencil
A flying saucer pumpkin stencil with a domed upper hull made of stacked horizontal band segments separated by narrow orange ribs, creating a layered effect that suggests a ringed spacecraft in profile. The bands alternate between cut and solid, so when lit the saucer appears to glow with horizontal light stripes rather than as a flat shape. Cut the widest central band first to anchor your position, then work upward band by band toward the dome, keeping each thin rib intact so the layers do not collapse mid-carve.