Pumpkin carving templates
572 free printable stencils. Download, print, trace, carve.
254 results · Page 7 of 8
Spider Emblem Pumpkin Stencil
A stylized spider rendered as a graphic emblem fills this easy stencil: the body is split into a large oval abdomen and a smaller rounded head kept solid as orange pumpkin, while the eight legs radiate outward as broad curved blades that taper to sharp points, all backed by cut-out negative space. The overall silhouette has a bold, almost logo-like quality that glows dramatically when lit. Leave the narrow waist bridge connecting the head to the abdomen until last, since removing adjacent leg gaps early can put stress on that small connector.
Spider Pumpkin Stencil
A large eight-legged spider crouches in full top-down view on this easy Halloween pumpkin stencil, its oval abdomen and round cephalothorax left as solid orange while all the space between the angled legs is pierced through. Eight legs radiate outward and slightly downward from the body, each tapering to a point. The gaps between legs are the cut areas, so work around the spider methodically to avoid accidentally snapping any single leg at its thinnest point near the body junction.
Spider Pumpkin Stencil
A large, wide-legged spider dominates this beginner spider pumpkin stencil. Eight straight angular legs radiate from a round body at center, and a small rounded head sits just above the abdomen, both carved as a solid silhouette island connected to the surrounding pumpkin only by the gaps between each leg segment. When lit, the dark spider shape floats against a glowing orange field created by the large open spaces around and between each leg. Start by cutting the long outer leg segments first so the body stays supported until the final cuts.
Spider Silhouette Pumpkin Stencil
A bold overhead-view spider silhouette with eight long tapering legs and a rounded abdomen below a smaller cephalothorax forms this easy spider pumpkin stencil, the entire body pierced through as one large connected cutout. The legs splay outward symmetrically, spanning nearly the full width of the design. Because the whole shape is one continuous cut, the chief challenge is the narrow neck pinch between the two body sections; cut that junction slowly with a fine blade to keep both halves from separating before you are done.
Star of David Pumpkin Stencil
Two overlapping equilateral triangles forming the Star of David fill this pumpkin stencil as a clean geometric shape. The entire six-pointed star outline is carved as a single continuous pierce-through, and the small hexagonal gaps at each interlocking corner are left as solid pumpkin wall, creating the interlaced look of the design. On the lit jack-o-lantern the star glows in bright outline form. Score the six triangle tip points lightly before making full cuts; the acute corners are the most likely to tear, so finish them with a fine blade rather than a heavy saw.
Stork with Baby Pumpkin Stencil
A flying stork carries a bundled newborn in its beak in this cheerful pumpkin stencil, the whole scene rendered as a single horizontal silhouette cut entirely through the pumpkin wall. The stork's body, outstretched wings, long bill, and the round swaddled baby bundle are all connected in one flowing outline. Because the bird's bill is the narrowest point in the silhouette, carve it last and approach the tip from the beak base rather than from the pointed end to avoid snapping.
Surprised Emoji Pumpkin Stencil
The surprised face emoji is translated into a pumpkin stencil with wide round eyes, a furrowed brow, a small nose bump, and a large open oval mouth. The face disc is partially cut away around the perimeter leaving a crescent of solid pumpkin at the top and right side; the eyes are rings with solid centers, and the mouth is a solid oval pierce. When lit, the face glows with an expression of shock. Carve the ring-shaped eye borders carefully: cut the outer circle first, then the inner pupil circle, leaving the solid dot of pumpkin wall between them untouched to preserve the iris-ring detail.
Surprised Ghost Pumpkin Stencil
A ghost face with two large oval eyes, a small heart-shaped nose, and a wide rounded mouth with a tiny tooth bump stares out from this simple pumpkin stencil. All four features are individual pierce-throughs floating in the pumpkin surface. When lit, the glowing eyes and mouth give the jack-o-lantern a look of wide-eyed astonishment. Since the four cutouts are widely spaced with generous pumpkin wall between them, cut the small heart nose last: its concave top curve requires care and the surrounding rigid wall makes it easiest to score clean inward curves.
Swift in Flight Pumpkin Stencil
A swift in full dive displays wide-spread wings and a deeply forked tail in this bird pumpkin stencil, its entire silhouette carved as one large open shape. The wing tips show a ragged, feathered edge that gives the design energy when lit; that serrated border is the most fragile detail. Score those feathered wingtip notches with short, shallow plunge cuts before removing the main wing mass, so the delicate points separate cleanly rather than tearing.
Tears of Joy Emoji Pumpkin Stencil
This emoji pumpkin stencil captures the classic tears-of-joy face: a large circular outline frames squinting crescent eyes, a wide open-mouth smile, and two teardrop shapes streaming from the outer eye corners. Most of the interior is pierced through, leaving thin curved bridges for the eyes, brow shapes, and a tongue strip inside the mouth. When lit, the laughing face reads instantly from across a porch. Keep the two small teardrop cutouts for last, as they are isolated from the main body and can shift if the stencil loosens.
Thumbs Down Emoji Pumpkin Stencil
A thumbs-down hand emoji is the subject of this easy pumpkin stencil: a clenched fist with four horizontal oval finger cutouts stacked on the right side, a large curved palm-and-back-of-hand mass pierced by a banana-shaped opening on the left, and a downward-pointing thumb teardrop at the bottom. The lit result shows the negative space of the knuckles and palm glowing while the solid pumpkin skin traces the finger outlines. Cut the four finger ovals first while the surrounding skin is still rigid, then remove the larger palm opening.
Thumbs Up Emoji Pumpkin Stencil
A thumbs-up hand emoji fills this easy pumpkin stencil: a large upward-pointing thumb teardrop at the top, a broad curved palm-and-knuckle mass in the center, four stacked horizontal oval finger cutouts on the right, and a small curved side-panel on the left. When lit, the stacked ovals glow as distinct bright bars above the palm opening, reading immediately as a raised-fist thumbs-up. Cut the four finger ovals before removing the larger central palm section so the surrounding skin remains firm while you make the smaller, more precise cuts.
Tombstone Pumpkin Stencil
A stacked tombstone silhouette fills this graveyard pumpkin stencil, with three wide horizontal bands separated by curved white gaps that read as the stone's chiseled lines when lit. The large cut-out sections glow boldly, making this one of the most open, lantern-like designs in the graveyard category. Because the horizontal bands are each an independent floating piece, carve the bottom base strip first and work upward so the upper segments stay supported while you cut.
Turtle Pumpkin Stencil
A side-view turtle with a segmented shell is the subject of this easy pumpkin stencil: the domed carapace is divided into roughly twelve polygonal scute cutouts separated by thin pumpkin-skin ridges, the head extends forward on a curved neck with a small circular eye detail, and four stubby legs and a short tail complete the silhouette. When lit, the shell glows as a mosaic of separate panels. Cut the smaller head and eye section before tackling the large shell scutes, since the head area has less surrounding support once the shell pieces are removed.
Twin Ghosts Pumpkin Stencil
Two translucent ghost figures overlap and reach upward together, their wispy forms open-armed and sheet-like, with hollow oval eye sockets and open screaming mouths pierced through on this easy ghost pumpkin stencil. The ghosts share a large connected negative space, so most of the design is carved away, leaving only the thin outlines and facial voids as glowing channels. Keep the narrow strip of solid skin separating the two ghosts intact by cutting each figure's outline from the outside edge inward rather than running the blade down the shared center seam.
Two Maple Leaves Pumpkin Stencil
Two maple leaves are shown on the same stencil sheet, stacked vertically: the upper leaf faces right with its stem pointing up, the lower leaf faces left with its stem trailing down. Both are cut as single solid silhouettes with the pointed maple-lobe edges forming the outline. Lit from inside, the two glowing leaf shapes overlap slightly at center, giving the pumpkin a layered, scattered-leaves feel. Carve the upper leaf first and fully remove it before starting the lower leaf so the two openings don't inadvertently merge along their closest edges.
Two Mushrooms Pumpkin Stencil
Two mushrooms fill this easy pumpkin stencil: a large one with a wide rounded cap dotted by three circular spots and two curved gill lines beneath, and a smaller companion mushroom to its right with a dome cap and two dots. Both stems and root tendrils are cut through as open shapes against solid pumpkin wall, giving the lit jack-o-lantern a clean, whimsical forest-floor silhouette. Leave the solid ridgeline that separates the large cap from the gill area intact as a natural bridge, cutting it would cause the gill shapes to fall free.
Two Sharks Pumpkin Stencil
Two sharks overlap in a dramatic diving composition for this easy pumpkin stencil: a large shark lunges forward with serrated teeth exposed, and a smaller shark curves below it. The negative space between the two bodies is cut away, leaving the sharks as solid orange pumpkin forms. The jagged row of teeth on the large shark is the most detailed edge in the design. Cut the teeth line with individual short plunge-cuts per tooth point rather than sawing along the jagged edge, which reduces the risk of tearing the tips.
Unicorn Pumpkin Stencil
A unicorn head in profile fills this beginner pumpkin stencil as a single clean silhouette: the long curved horn, a flowing mane with jagged spiky edges along the neck, and a graceful muzzle. The entire design is carved as one connected open shape so the lit jack-o-lantern shows the full unicorn outline glowing as a bright cutout. The jagged mane edge along the top of the neck creates a row of shallow points that can break if the blade wanders. Keep cuts on the mane tips short and angled directly inward toward the center mass to avoid snapping the narrow points.
USA Text Pumpkin Stencil
Bold block letters spelling "USA" are carved as open pierce-throughs in this easy pumpkin stencil, with a five-pointed star replacing the crossbar of the letter A. The rounded, wide letters are generously sized and leave thick orange walls between them. On the lit pumpkin the three letters glow brightly and the star cutout inside the A shines as a distinct shape. Score the star outline inside the A before cutting the surrounding letter body, since the star's tight inner points are easiest to navigate when the pumpkin wall around them is still rigid.
Utah Pumpkin Stencil
Utah's immediately recognizable outline is the entire design here: a large near-rectangle with a single square notch cut from the upper-right corner where the Four Corners region meets. The shape is pierced through as one solid opening, leaving a clean geometric silhouette that glows as a single bright window. Because the notch corner is the only angular detail in this stencil, score that interior right angle first with the tip of your blade to keep it crisp before opening the rest of the cutout.
Vampire Face Pumpkin Stencil
A close-up vampire face dominates this witch-category pumpkin stencil, featuring wide circular eyes with small pupils, a widow's-peak hairline, swept-back collar wings, and a gaping mouth with prominent fangs. The large open areas of the eyes, collar, and mouth are pierced through, while the face itself stays solid so the features read clearly when lit. Cut the two eye circles first to anchor your registration, then work outward to the collar wings before tackling the mouth and fang gaps.
Vampire Fangs Pumpkin Stencil
Three simple shapes make up this easy vampire pumpkin stencil: two large angular eye cuts that taper to sharp inner corners and a wide crescent grin with two pointed fangs hanging from the upper lip. The design is spare and confident, leaving most of the pumpkin surface solid, so the three glowing openings read as a sinister smirk from a distance. When lit, the fang tips glow brightest; cut the fangs from the inside of the mouth outward so your blade exits the shell cleanly without cracking the narrow points.
Vampire Jack-o-Lantern Pumpkin Stencil
A classic jack-o-lantern face with a vampire twist fills this pumpkin stencil: arched brows made of two angular patches over each eye, two large irregular triangular eye openings, a small v-shaped nose cutout, and a wide gaping mouth with jagged upper fangs and a rounded lower lip. All features are separate pierced-through shapes, so the candle-lit face shows glowing eyes, nose, and teeth against the solid orange pumpkin skin. Cut the small v-shaped nose notch and the two narrow eyebrow patches first so you can use the surrounding wall for leverage when carving the larger mouth and eye shapes.
Velociraptor Pumpkin Stencil
A velociraptor in full stride dominates this easy pumpkin stencil, shown in profile with its distinctive upright neck, narrow head, small forelimbs, and long stiffened tail extended behind it. The entire dinosaur silhouette is cut as a single open shape, and a small inner detail near the chest is removed separately to show the bent arm. Lit from behind, it reads instantly as a raptor shadow against the glowing pumpkin. Trace the tail outline before cutting because the long thin tail tip can run outside the pumpkin's curve if not centered.
Vermont Pumpkin Stencil
Vermont's narrow, elongated state outline is pierced as a single open shape on this easy pumpkin stencil, showing the slightly irregular wavy eastern border, the smoother western edge along Lake Champlain, and the small northern bump where the Northeast Kingdom juts upward. Lit, it glows as a tall vertical window of light. Because Vermont's outline runs close to the top of a typical pumpkin curve, tape the stencil with the northern bump positioned at least an inch below the stem base to leave enough wall thickness.
Virginia Pumpkin Stencil
Virginia's wide, wedge-shaped state outline fills this easy pumpkin stencil, showing the long straight northern border, the ragged mountainous western edge, the sweeping diagonal southern coastline, and the distinctive narrow Eastern Shore peninsula extending to the right. The entire shape is cut as a single open silhouette. The thin Eastern Shore tip is the most fragile point in this carving, so cut toward that peninsula from the main body first and finish with the very tip to prevent it from snapping off mid-cut.
Volleyball Pumpkin Stencil
A volleyball fills this easy pumpkin stencil from edge to edge, its circular outline and internal panel lines rendered in the classic three-curved-line pattern that divides the ball into panels. The wide panel sections are cut away, leaving the curved dividing strips as solid pumpkin flesh that forms the seam lines. When lit, the jack-o-lantern glows through the large open panels while the seam lines stay dark. Score along each curved seam line with a detail tool before cutting to keep the thin curved strips from tearing under the blade.
Walking Zombie Pumpkin Stencil
A stick-thin zombie figure lurches forward in mid-stride on this easy pumpkin stencil: arms outstretched and ragged, mouth open, body leaning with one leg lifted and tattered coat hem trailing behind. The silhouette is carved almost entirely as one connected void, with only a few narrow bridges at the coat flaps defining the outline against the solid pumpkin. Because the figure is tall and narrow, center it vertically on the pumpkin face and cut the wide torso section before the spindly arm extensions to avoid flexing the skin.
Washington State Pumpkin Stencil
Washington state's broad, nearly rectangular outline is cut as a single open shape on this easy pumpkin stencil, showing the slightly notched upper-left corner where the Olympic Peninsula juts north, the ragged lower-left coastline, and the otherwise straight eastern and southern borders. Lit, it produces a wide glowing window that is instantly readable as the Evergreen State. Because the shape is nearly as wide as it is tall, center it horizontally on the pumpkin face before tracing so the coastline notch does not run off either edge.
Weary Face Emoji Pumpkin Stencil
The weary face emoji is recreated here as a jack-o-lantern pumpkin stencil: a large circular face outline holds two sets of drooping curved eyebrow-and-eyelid pairs that express exhaustion, a wide open mouth with squared-off upper teeth, and a small chin sweat drop below. All the interior shapes are cut through as separate pieces nested inside the face circle. Carve the tiny sweat drop below the chin first since it is isolated and easy to lose track of, then work upward through the teeth, mouth, and finally the eye arcs.
Winking Face Emoji Pumpkin Stencil
A round emoji face with one eye winking shut and the other squinting in a spiral, a wide grin, and a tongue sticking out fills this easy pumpkin stencil. The large circular face outline, the wink line, the spiral eye, the smile strip, and the tongue are all solid orange wall, while the areas around them are pierced so the whole face glows from within. Carve the tongue's narrow center notch before removing the wide background cuts, since the notch is the tightest detail and easiest to slip on with excess pumpkin removed around it.
Witch Cauldron Pumpkin Stencil
A witch's cauldron viewed straight on forms this easy witch pumpkin stencil, with three bubble circles floating above the pot, a wide rectangular opening for the cauldron mouth, a thick rim strip, and two claw-footed legs flanking a centered spout at the base. All the shapes are cut through as separate open pieces, glowing independently when lit to suggest a bubbling brew. Cut the three small bubble circles near the top of the design first, since they sit in isolation and are easiest to control before the larger cuts below loosen the wall.
Witch Hat Jack-o-Lantern Pumpkin Stencil
A grinning jack-o-lantern face wearing a small pointed witch hat sits at the center of this easy funny pumpkin stencil. The face features two large crescent-shaped eyes with small round highlight dots inside each, a triangular nose, a wide upward-curving mouth with a center tooth drip, and wispy curl accents at the cheek corners. The hat brim and crown are solid while the eye crescents, nose, and mouth are cut through. Carve the two small round eye-highlight dots before removing the larger crescent eye shapes so those tiny circles stay intact and the eye reads with dimension when lit.
Witch Hat Pumpkin Stencil
This witch-hat pumpkin stencil reduces the classic Halloween icon to its boldest shapes: a wide, wavy brim in two swooping cut-out bands, a trapezoidal crown, and a tight spiral curl at the hat's tip. The large open areas mean the design reads clearly even on a small pumpkin, and the lit result is a silhouette-style hat floating against glowing orange. Cut the lower brim band first, then the upper brim, and finally the crown, so the spiral finial stays supported until the end.
Witch on Moon Pumpkin Stencil
A large crescent moon shape is carved away to create a sweeping dark arc on this easy Halloween pumpkin stencil, and within that negative space a witch's profile appears in silhouette: a pointed hat, hooked nose, and grasping claw-like fingers reaching downward. A cluster of three small rectangular slots and a jagged hat-brim notch provide the only additional cut elements. The cropped hat top is a floating island; secure it with a toothpick before you make the final crescent arc cut so it doesn't drop and crack the brim.